[Sun Jun  9 16:26:02 2013] Detection parameters:
  Position = (286.9, 275.9) = 12 42 49.86 2 41 15.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41113.8 +/- 248.0
  Background counts = 467.1
  Rate = 0.8 +/- 0.005

[Sun Jun  9 16:26:07 2013] Off-axis axis estimate = 1.83'
[Sun Jun  9 16:26:57 2013] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 16:26:57 2013] Initial guess for spatial extent in simple fitting = 7.34"
[Sun Jun  9 16:26:57 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.835
[Sun Jun  9 16:26:57 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.34"
[Sun Jun  9 16:26:58 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun  9 16:26:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src1.csv
[Sun Jun  9 16:26:58 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun  9 16:26:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src1.csv
[Sun Jun  9 16:26:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 16:27:01 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  9 16:27:01 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  9 16:27:01 2013] Fit fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun  9 16:27:32 2013] Spatial fit model total counts = 82675.800000, observed total counts = 84937.000000
[Sun Jun  9 16:27:32 2013] Offset between fit and detection position for source 1 = 2.780797 pixels
[Sun Jun  9 16:27:32 2013] 78614.600000 total counts/ 17414.800000 bgd. counts: snr = 463.757298
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.780797 pixels
  Position = (286.6, 278.7) = 12 42 49.96 2 41 28.0
  Extent = 14.7 (14.7-29.4)", rotation angle = 0
  Source counts = 61199.8 +/- 280.4
  Background counts = 17414.8
  Rate = 1 +/- 0.005
[Sun Jun  9 16:27:32 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 16:27:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 16:27:32 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 16:27:32 2013] Source does appear to be extended
[Sun Jun  9 16:27:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 16:28:23 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 16:28:23 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  9 16:28:23 2013] Initial guess for spatial extent in simple fitting = 14.69"
[Sun Jun  9 16:28:23 2013] source mask rpix=3.4, npix_max = 60, mask sum = 56, frac = 0.932
[Sun Jun  9 16:28:23 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 14.69"
[Sun Jun  9 16:28:23 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun  9 16:28:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src1.csv
[Sun Jun  9 16:28:23 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun  9 16:28:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src1.csv
[Sun Jun  9 16:28:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 16:28:25 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  9 16:28:25 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  9 16:28:25 2013] Fit fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun  9 16:28:51 2013] Spatial fit model total counts = 141149.000000, observed total counts = 144384.000000
[Sun Jun  9 16:28:51 2013] Offset between fit and detection position for source 1 = 2.744874 pixels
[Sun Jun  9 16:28:51 2013] 140625.100000 total counts/ 72900.000000 bgd. counts: snr = 250.833704
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.744874 pixels
  Position = (287.0, 276.0) = 12 42 49.85 2 41 16.1
  Extent = 18.1 (18.0-18.3)", rotation angle = 0
  Source counts = 67725.1 +/- 375.0
  Background counts = 72900.0
  Rate = 1 +/- 0.007
[Sun Jun  9 16:28:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 16:28:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 16:28:51 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 16:28:51 2013] Source does appear to be extended
[Sun Jun  9 16:28:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 16:29:30 2013] Counts = 67725.100000, rescaling region sizes by 3.000000
[Sun Jun  9 16:29:30 2013] XMMSAS src. selection expression = ellipse(24918.648800, 23962.382000, 3262.878094, 3262.878094, 0.000000, X, Y)
[Sun Jun  9 16:29:30 2013] Not overwriting source region fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun  9 16:29:30 2013] Extracting stamp from image fullrun_pn_xmm0111190701_pi300-10000_cl_sm2.00.img.gz, (99, 88) - (475, 464)
[Sun Jun  9 16:29:30 2013] XMMSAS bgd. selection expression = annulus(24918.648800, 23962.382000, 16314.390469, 32628.780939, X, Y) && !ellipse(36614.397400, 23430.211600, 437.976813, 437.976813, 0.000000, X, Y) && !ellipse(25973.139465, 22703.946136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24987.648346, 22217.242096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28169.902740, 15947.840439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33828.102051, 13975.676712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24958.918323, 13752.431094, 588.849480, 372.160855, 359.885272, X, Y) && !ellipse(23023.466000, 13245.438600, 582.297617, 399.187211, 10.193800, X, Y) && !ellipse(31313.062000, 11319.487000, 518.431195, 518.431195, 0.000000, X, Y) && !ellipse(26472.415070, 10322.936523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23237.944214, 34272.729187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28949.775116, 30399.628204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35638.667419, 25335.268677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27509.122800, 22871.654800, 522.374415, 522.374415, 0.000000, X, Y) && !ellipse(26377.538000, 22069.080000, 1341.528039, 558.437616, 5.363940, X, Y) && !ellipse(24401.699800, 20764.567200, 446.363213, 446.363213, 0.000000, X, Y) && !ellipse(32842.063995, 15388.944824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22259.332275, 10833.640038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29619.325714, 11055.852051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17007.128098, 34409.067596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29053.313293, 33961.827911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32126.092865, 32224.918365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36654.054169, 28562.762115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27139.000000, 26240.033630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26245.200317, 25774.463623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27698.943024, 23463.908447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36916.124146, 19279.857071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41880.312073, 18802.800079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19374.581400, 14878.627200, 408.340812, 408.340812, 0.000000, X, Y) && !ellipse(18897.856766, 13826.803909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35798.136444, 12291.148239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22656.113129, 7682.749504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19059.654251, 36875.908417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19190.110000, 36310.026000, 3478.832100, 1619.528047, 53.148000, X, Y) && !ellipse(23433.574738, 36034.710175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19730.466000, 35407.520000, 1725.688050, 1725.688050, 0.000000, X, Y) && !ellipse(19949.410000, 34779.900000, 1695.888049, 1695.888049, 0.000000, X, Y) && !ellipse(27422.926178, 34194.668671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30362.051575, 34152.262543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21399.584000, 32371.400000, 1576.168045, 1576.168045, 0.000000, X, Y) && !ellipse(19285.309174, 31945.200409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21515.393076, 31428.442309, 1418.400041, 998.679304, 62.549377, X, Y) && !ellipse(24010.498600, 31460.385600, 391.737611, 391.737611, 0.000000, X, Y) && !ellipse(38517.414795, 30834.989288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22264.046600, 30263.096400, 1403.360040, 1403.360040, 0.000000, X, Y) && !ellipse(25053.519623, 29518.219543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18661.991928, 29434.779938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27104.502820, 28604.095400, 368.296811, 368.296811, 0.000000, X, Y) && !ellipse(23782.525260, 28178.070200, 612.274418, 612.274418, 0.000000, X, Y) && !ellipse(23377.484000, 27187.646000, 1182.128034, 1182.128034, 0.000000, X, Y) && !ellipse(27052.002655, 26653.615509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24928.796967, 26648.788666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17260.974220, 26732.762800, 391.951211, 391.951211, 0.000000, X, Y) && !ellipse(23680.904000, 26670.736000, 1110.528032, 1110.528032, 19.560000, X, Y) && !ellipse(26533.324000, 26342.640000, 1052.480030, 1052.480030, 0.000000, X, Y) && !ellipse(18739.753754, 26320.624390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27587.766327, 25623.214569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27730.750275, 25266.652100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28511.227997, 24751.483490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30084.608978, 24560.517853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20820.956879, 24103.300568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28526.884705, 22297.915161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27985.869385, 22496.572418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21884.301422, 21903.137527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28461.976000, 21930.006000, 1295.032037, 1295.032037, 0.000000, X, Y) && !ellipse(27029.392426, 21355.232407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26567.873993, 21448.893875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28220.818237, 21086.102707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25021.059235, 21109.651489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27359.340881, 21011.934464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28339.142000, 20127.980000, 810.320023, 810.320023, 0.000000, X, Y) && !ellipse(26785.294342, 20760.597443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25832.808000, 19906.894000, 1401.560040, 1401.560040, 0.000000, X, Y) && !ellipse(27804.220000, 20067.314000, 1284.584037, 1284.584037, 0.000000, X, Y) && !ellipse(34814.169312, 20107.821320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23786.199799, 19846.452271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23224.592072, 18539.390640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14539.409790, 18382.196976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15940.808594, 16941.948456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20077.824799, 14383.514435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27863.756622, 38330.437012, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 16:29:30 2013] Writing fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src1.gif
[Sun Jun  9 16:29:33 2013] ../../xmm0111190701/products/events/fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0111190701/products/events/fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Jun  9 16:29:34 2013] Mean detx,y = (599.16, 96.20) 
[Sun Jun  9 16:29:34 2013] ../../xmm0111190701/products/images/fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src1_src.img and ../../xmm0111190701/products/images/fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Jun  9 16:29:34 2013] ../../xmm0111190701/products/spectra/fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src1_src.pi and ../../xmm0111190701/products/spectra/fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Jun  9 16:29:34 2013] Setting source spectrum file to fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src1_src.pi.gz
[Sun Jun  9 16:29:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun  9 16:29:34 2013] ../../xmm0111190701/products/lightcurves/fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0111190701/products/lightcurves/fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Jun  9 17:07:49 2013] Updating aperture counts using extracted products
[Sun Jun  9 17:07:50 2013] Total counts from fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src1_src.pi.gz = 249555.00
[Sun Jun  9 17:07:50 2013] Total counts from fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src1_bgd.pi.gz = 34393.00
[Sun Jun  9 17:07:50 2013] Got source and background scale factors 29300777.000000, 97040250.000000
[Sun Jun  9 17:07:50 2013] User source parameters:
  Position = (287.0, 276.0) = 12 42 49.85 2 41 16.1
  Extent = 18.1 (18.0-18.3)", rotation angle = 0
  Source aperture counts = 239170.2 +/- 500.6
  Background aperture counts = 10384.8
  Rate = 4 +/- 0.009

[Sun Jun  9 17:08:06 2013] No arf file for this source, not re-computing flux
[Sun Jun  9 17:08:27 2013] Source 1 has no response, skipping
[Sun Jun  9 17:08:33 2013] xmm0111190701/analysis//spectral/fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete