[Sun Jun 9 16:26:13 2013] Detection parameters: Position = (275.9, 233.9) = 12 42 53.07 2 38 15.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 78.2 +/- 16.2 Background counts = 73.4 Rate = 0.001 +/- 0.0003 [Sun Jun 9 16:26:13 2013] Off-axis axis estimate = 4.96' [Sun Jun 9 16:27:06 2013] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 16:27:06 2013] Initial guess for spatial extent in simple fitting = 8.91" [Sun Jun 9 16:27:06 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.963 [Sun Jun 9 16:27:06 2013] Giving source the simple spatial ID 64 for pass 0, mean size = 8.91" [Sun Jun 9 16:27:08 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_src64.ximg exists [Sun Jun 9 16:27:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_src64.csv [Sun Jun 9 16:27:08 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_src64_1.ximg exists [Sun Jun 9 16:27:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_src64.csv [Sun Jun 9 16:27:08 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_src64_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 16:27:09 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src64.ximg exists [Sun Jun 9 16:27:09 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists [Sun Jun 9 16:27:09 2013] Fit fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly [Sun Jun 9 16:28:02 2013] Warning, spatial fit 64 centroid is now closest to src. 24 [Sun Jun 9 16:28:02 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 16:28:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 16:28:02 2013] Assessing source extent using major [Sun Jun 9 16:28:02 2013] Source does appear to be extended [Sun Jun 9 16:28:02 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 16:28:02 2013] Source is confused with source 24 [Sun Jun 9 16:28:29 2013] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 16:28:29 2013] Initial guess for spatial extent in simple fitting = 8.91" [Sun Jun 9 16:28:29 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.963 [Sun Jun 9 16:28:29 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 8.91" [Sun Jun 9 16:28:30 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_src59.ximg exists [Sun Jun 9 16:28:30 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_src59.csv [Sun Jun 9 16:28:30 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_src59_1.ximg exists [Sun Jun 9 16:28:30 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_src59.csv [Sun Jun 9 16:28:30 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_src59_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 16:28:31 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src59.ximg exists [Sun Jun 9 16:28:31 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists [Sun Jun 9 16:28:31 2013] Fit fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly [Sun Jun 9 16:29:12 2013] Source 77 is offset by -4.935802 and -5.067307 pixels which is larger than 2 X fitted extent = 1.467669 x 1.467669, not incorporating fit results [Sun Jun 9 16:29:12 2013] Source 77 is offset by -4.954055 and -5.143698 pixels which is larger than 2 X fitted extent = 1.579977 x 1.579977, not incorporating fit results [Sun Jun 9 16:29:12 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 16:29:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 16:29:12 2013] Assessing source extent using major [Sun Jun 9 16:29:12 2013] Source does appear to be extended [Sun Jun 9 16:29:12 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 17:06:16 2013] XMMSAS src. selection expression = ellipse(23952.115234, 20300.000305, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 9 17:06:16 2013] Not overwriting source region fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src77_src.reg [Sun Jun 9 17:06:16 2013] Extracting stamp from image fullrun_mos2_xmm0111190701_pi300-10000_cl_sm2.00.img.gz, (238, 196) - (313, 271) [Sun Jun 9 17:06:16 2013] XMMSAS bgd. selection expression = annulus(23952.115234, 20300.000305, 1087.500000, 2175.000000, X, Y) && !ellipse(23978.858520, 19855.417780, 347.925610, 347.925610, 0.000000, X, Y) && !ellipse(24920.338043, 21794.783127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25531.162048, 21781.926147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26561.371826, 21276.039520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25052.845245, 21101.081055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27183.776000, 21973.770000, 1341.560039, 1341.560039, 0.000000, X, Y) && !ellipse(23203.452000, 20973.936000, 1352.256039, 1352.256039, 0.000000, X, Y) && !ellipse(27927.752000, 20766.358000, 2677.376077, 2677.376077, 0.000000, X, Y) [Sun Jun 9 17:06:16 2013] Writing fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src77.gif [Sun Jun 9 17:06:18 2013] ../../xmm0111190701/products/events/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src77_src.evt and ../../xmm0111190701/products/events/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src77_bgd.evt exist, delete to re-create [Sun Jun 9 17:06:18 2013] Mean detx,y = (-2822.57, 2757.30) [Sun Jun 9 17:06:18 2013] ../../xmm0111190701/products/images/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src77_src.img and ../../xmm0111190701/products/images/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src77_bgd.img exist, delete to re-create [Sun Jun 9 17:06:18 2013] ../../xmm0111190701/products/spectra/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src77_src.pi and ../../xmm0111190701/products/spectra/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src77_bgd.pi exist, delete to re-create [Sun Jun 9 17:06:18 2013] Setting source spectrum file to fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src77_src.pi.gz [Sun Jun 9 17:06:18 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src77_bgd.pi.gz [Sun Jun 9 17:06:18 2013] ../../xmm0111190701/products/lightcurves/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src77_src.lc and ../../xmm0111190701/products/lightcurves/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src77_bgd.lc exist, delete to re-create [Sun Jun 9 17:06:32 2013] Not generating rmf since there are only 78 counts [Sun Jun 9 17:06:32 2013] rmf not generated due to insufficient counts [Sun Jun 9 17:08:21 2013] Updating aperture counts using extracted products [Sun Jun 9 17:08:21 2013] Total counts from fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src77_src.pi.gz = 939.00 [Sun Jun 9 17:08:21 2013] Total counts from fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src77_bgd.pi.gz = 1467.00 [Sun Jun 9 17:08:21 2013] Got source and background scale factors 1340800.000000, 4779220.000000 [Sun Jun 9 17:08:21 2013] User source parameters: Position = (275.9, 233.9) = 12 42 53.07 2 38 15.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 527.4 +/- 31.7 Background aperture counts = 411.6 Rate = 0.009 +/- 0.0005 [Sun Jun 9 17:08:21 2013] Updating counts from extracted products [Sun Jun 9 17:08:21 2013] Set source signif. to 527.44/20.29 = 26.00 [Sun Jun 9 17:08:22 2013] No arf file for this source, not re-computing flux [Sun Jun 9 17:08:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 9 17:08:27 2013] xmm0111190701/analysis//spectral/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src77_pl.csv not found, spectral fit skipped or did not complete