[Sun Jun  9 16:26:12 2013] Detection parameters:
  Position = (215.6, 303.5) = 12 43 10.58 2 43 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.8 +/- 14.6
  Background counts = 49.9
  Rate = 0.002 +/- 0.0003

[Sun Jun  9 16:26:13 2013] Off-axis axis estimate = 6.02'
[Sun Jun  9 16:27:06 2013] Using EEF radius (= 9.44 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 16:27:06 2013] Initial guess for spatial extent in simple fitting = 9.44"
[Sun Jun  9 16:27:06 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.877
[Sun Jun  9 16:27:06 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 9.44"
[Sun Jun  9 16:27:08 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_src51.ximg exists
[Sun Jun  9 16:27:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_src51.csv
[Sun Jun  9 16:27:08 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_src51_1.ximg exists
[Sun Jun  9 16:27:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_src51.csv
[Sun Jun  9 16:27:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 16:27:09 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Sun Jun  9 16:27:09 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Sun Jun  9 16:27:09 2013] Fit fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Sun Jun  9 16:28:02 2013] Spatial fit model total counts = 593.406000, observed total counts = 594.000000
[Sun Jun  9 16:28:02 2013] Offset between fit and detection position for source 55 = 0.124113 pixels
[Sun Jun  9 16:28:02 2013] 594.695500 total counts/ 538.186000 bgd. counts: snr = 2.435877
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.124113 pixels
  Position = (215.5, 303.4) = 12 43 10.61 2 43 15.3
  Extent = 4.8 (3.4-6.7)", rotation angle = 0
  Source counts = 56.5 +/- 24.4
  Background counts = 538.2
  Rate = 0.0009 +/- 0.0004
[Sun Jun  9 16:28:02 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 16:28:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 16:28:02 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 16:28:02 2013] Source does appear to be extended
[Sun Jun  9 16:28:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 16:28:29 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 16:28:29 2013] Initial guess for spatial extent in simple fitting = 4.80"
[Sun Jun  9 16:28:29 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.875
[Sun Jun  9 16:28:29 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 4.80"
[Sun Jun  9 16:28:30 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_src47.ximg exists
[Sun Jun  9 16:28:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_src47.csv
[Sun Jun  9 16:28:30 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_src47_1.ximg exists
[Sun Jun  9 16:28:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_src47.csv
[Sun Jun  9 16:28:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 16:28:31 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Sun Jun  9 16:28:31 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Sun Jun  9 16:28:31 2013] Fit fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Sun Jun  9 16:29:12 2013] Spatial fit model total counts = 582.999000, observed total counts = 583.000000
[Sun Jun  9 16:29:12 2013] Offset between fit and detection position for source 55 = 0.012286 pixels
[Sun Jun  9 16:29:12 2013] 583.700700 total counts/ 527.460000 bgd. counts: snr = 2.448815
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.012286 pixels
  Position = (215.5, 303.4) = 12 43 10.61 2 43 15.3
  Extent = 4.7 (3.5-6.9)", rotation angle = 0
  Source counts = 56.2 +/- 24.2
  Background counts = 527.5
  Rate = 0.0009 +/- 0.0004
[Sun Jun  9 16:29:12 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 16:29:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 16:29:12 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 16:29:12 2013] Source does appear to be extended
[Sun Jun  9 16:29:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 17:06:16 2013] XMMSAS src. selection expression = ellipse(18697.374200, 26346.278600, 279.466208, 279.466208, 0.000000, X, Y)
[Sun Jun  9 17:06:16 2013] Not overwriting source region fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src55_src.reg
[Sun Jun  9 17:06:16 2013] Extracting stamp from image fullrun_mos2_xmm0111190701_pi300-10000_cl_sm2.00.img.gz, (199, 287) - (232, 319)
[Sun Jun  9 17:06:16 2013] XMMSAS bgd. selection expression = annulus(18697.374200, 26346.278600, 465.777013, 931.554027, X, Y) && !ellipse(17262.636169, 26724.069366, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 17:06:16 2013] Writing fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src55.gif
[Sun Jun  9 17:06:18 2013] ../../xmm0111190701/products/events/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src55_src.evt and ../../xmm0111190701/products/events/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src55_bgd.evt exist, delete to re-create
[Sun Jun  9 17:06:18 2013] Mean detx,y = (-5273.92, -4908.27) 
[Sun Jun  9 17:06:18 2013] ../../xmm0111190701/products/images/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src55_src.img and ../../xmm0111190701/products/images/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src55_bgd.img exist, delete to re-create
[Sun Jun  9 17:06:18 2013] ../../xmm0111190701/products/spectra/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src55_src.pi and ../../xmm0111190701/products/spectra/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src55_bgd.pi exist, delete to re-create
[Sun Jun  9 17:06:18 2013] Setting source spectrum file to fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src55_src.pi.gz
[Sun Jun  9 17:06:18 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Sun Jun  9 17:06:18 2013] ../../xmm0111190701/products/lightcurves/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src55_src.lc and ../../xmm0111190701/products/lightcurves/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src55_bgd.lc exist, delete to re-create
[Sun Jun  9 17:06:31 2013] Not generating rmf since there are only 56 counts
[Sun Jun  9 17:06:31 2013] rmf not generated due to insufficient counts
[Sun Jun  9 17:08:20 2013] Updating aperture counts using extracted products
[Sun Jun  9 17:08:20 2013] Total counts from fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src55_src.pi.gz = 121.00
[Sun Jun  9 17:08:20 2013] Total counts from fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src55_bgd.pi.gz = 464.00
[Sun Jun  9 17:08:20 2013] Got source and background scale factors 246400.000000, 1816444.000000
[Sun Jun  9 17:08:20 2013] User source parameters:
  Position = (215.5, 303.4) = 12 43 10.61 2 43 15.3
  Extent = 4.7 (3.5-6.9)", rotation angle = 0
  Source aperture counts = 58.1 +/- 12.0
  Background aperture counts = 62.9
  Rate = 0.0009 +/- 0.0002

[Sun Jun  9 17:08:22 2013] No arf file for this source, not re-computing flux
[Sun Jun  9 17:08:26 2013] Source 55 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  9 17:08:27 2013] xmm0111190701/analysis//spectral/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete