[Sun Jun  9 16:26:12 2013] Detection parameters:
  Position = (242.5, 387.1) = 12 43 2.76 2 49 23.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.8 +/- 12.7
  Background counts = 37.2
  Rate = 0.001 +/- 0.0002

[Sun Jun  9 16:26:13 2013] Off-axis axis estimate = 7.60'
[Sun Jun  9 16:27:06 2013] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 16:27:06 2013] Initial guess for spatial extent in simple fitting = 10.23"
[Sun Jun  9 16:27:06 2013] source mask rpix=2.4, npix_max = 32, mask sum = 20, frac = 0.615
[Sun Jun  9 16:27:06 2013] Giving source the simple spatial ID 71 for pass 0, mean size = 10.23"
[Sun Jun  9 16:27:08 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_src71.ximg exists
[Sun Jun  9 16:27:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_src71.csv
[Sun Jun  9 16:27:08 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_src71_1.ximg exists
[Sun Jun  9 16:27:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_src71.csv
[Sun Jun  9 16:27:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 16:27:09 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Sun Jun  9 16:27:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src71.csv
[Sun Jun  9 16:27:09 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Sun Jun  9 16:27:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src71.csv
[Sun Jun  9 16:27:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 16:28:02 2013] Warning: source 71 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 10.166961 pixels away
[Sun Jun  9 16:28:02 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 16:28:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 16:28:02 2013] Assessing source extent using major
[Sun Jun  9 16:28:02 2013] Source does appear to be extended
[Sun Jun  9 16:28:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 16:28:29 2013] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 16:28:29 2013] Initial guess for spatial extent in simple fitting = 10.23"
[Sun Jun  9 16:28:29 2013] source mask rpix=2.4, npix_max = 32, mask sum = 20, frac = 0.615
[Sun Jun  9 16:28:29 2013] Giving source the simple spatial ID 65 for pass 1, mean size = 10.23"
[Sun Jun  9 16:28:30 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_src65.ximg exists
[Sun Jun  9 16:28:30 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_src65_1.ximg exists
[Sun Jun  9 16:28:30 2013] Fit fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_src65 appears to have run properly
[Sun Jun  9 16:28:31 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Sun Jun  9 16:28:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src65.csv
[Sun Jun  9 16:28:31 2013] fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Sun Jun  9 16:28:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src65.csv
[Sun Jun  9 16:28:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 16:29:12 2013] Warning: source 65 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 13.184195 pixels away
[Sun Jun  9 16:29:12 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 16:29:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 16:29:12 2013] Assessing source extent using major
[Sun Jun  9 16:29:12 2013] Source does appear to be extended
[Sun Jun  9 16:29:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 17:06:16 2013] XMMSAS src. selection expression = ellipse(21048.161011, 33627.480072, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  9 17:06:16 2013] Not overwriting source region fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src43_src.reg
[Sun Jun  9 17:06:16 2013] Extracting stamp from image fullrun_mos2_xmm0111190701_pi300-10000_cl_sm2.00.img.gz, (205, 350) - (280, 425)
[Sun Jun  9 17:06:16 2013] XMMSAS bgd. selection expression = annulus(21048.161011, 33627.480072, 1087.500000, 2175.000000, X, Y) && !ellipse(23264.754700, 34397.895233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23972.760742, 31454.845703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23430.905600, 35993.268600, 479.244014, 373.329611, 358.928953, X, Y) && !ellipse(19267.387726, 31930.719879, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 17:06:16 2013] Writing fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src43.gif
[Sun Jun  9 17:06:18 2013] ../../xmm0111190701/products/events/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src43_src.evt and ../../xmm0111190701/products/events/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src43_bgd.evt exist, delete to re-create
[Sun Jun  9 17:06:18 2013] Mean detx,y = (-249.94, -10632.34) 
[Sun Jun  9 17:06:18 2013] ../../xmm0111190701/products/images/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src43_src.img and ../../xmm0111190701/products/images/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src43_bgd.img exist, delete to re-create
[Sun Jun  9 17:06:18 2013] ../../xmm0111190701/products/spectra/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src43_src.pi and ../../xmm0111190701/products/spectra/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src43_bgd.pi exist, delete to re-create
[Sun Jun  9 17:06:18 2013] Setting source spectrum file to fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src43_src.pi.gz
[Sun Jun  9 17:06:18 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sun Jun  9 17:06:18 2013] ../../xmm0111190701/products/lightcurves/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src43_src.lc and ../../xmm0111190701/products/lightcurves/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src43_bgd.lc exist, delete to re-create
[Sun Jun  9 17:06:33 2013] Not generating rmf since there are only 80 counts
[Sun Jun  9 17:06:33 2013] rmf not generated due to insufficient counts
[Sun Jun  9 17:08:22 2013] Updating aperture counts using extracted products
[Sun Jun  9 17:08:22 2013] Total counts from fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src43_src.pi.gz = 271.00
[Sun Jun  9 17:08:22 2013] Total counts from fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src43_bgd.pi.gz = 1864.00
[Sun Jun  9 17:08:22 2013] Got source and background scale factors 1135130.000000, 9346734.000000
[Sun Jun  9 17:08:22 2013] User source parameters:
  Position = (242.5, 387.1) = 12 43 2.76 2 49 23.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 44.6 +/- 17.5
  Background aperture counts = 226.4
  Rate = 0.0007 +/- 0.0003

[Sun Jun  9 17:08:22 2013] Updating counts from extracted products
[Sun Jun  9 17:08:22 2013] Set source signif. to 44.62/15.05 = 2.97
[Sun Jun  9 17:08:22 2013] No arf file for this source, not re-computing flux
[Sun Jun  9 17:08:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  9 17:08:27 2013] xmm0111190701/analysis//spectral/fullrun_mos2_xmm0111190701_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete