[Sun Jun 9 16:26:08 2013] Detection parameters: Position = (302.8, 296.0) = 12 42 45.25 2 42 45.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 216.8 +/- 26.1 Background counts = 138.2 Rate = 0.004 +/- 0.0005 [Sun Jun 9 16:26:10 2013] Off-axis axis estimate = 0.36' [Sun Jun 9 16:27:03 2013] Using EEF radius (= 6.61 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 16:27:03 2013] Initial guess for spatial extent in simple fitting = 6.61" [Sun Jun 9 16:27:03 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.981 [Sun Jun 9 16:27:03 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 6.61" [Sun Jun 9 16:27:04 2013] fullrun_mos1_xmm0111190701_pi300-10000_cl_pass0_src21.ximg exists [Sun Jun 9 16:27:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111190701_pi300-10000_cl_pass0_src21.csv [Sun Jun 9 16:27:04 2013] fullrun_mos1_xmm0111190701_pi300-10000_cl_pass0_src21_1.ximg exists [Sun Jun 9 16:27:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111190701_pi300-10000_cl_pass0_src21.csv [Sun Jun 9 16:27:04 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0111190701_pi300-10000_cl_pass0_src21_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0111190701_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 16:27:05 2013] fullrun_mos1_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src21.ximg exists [Sun Jun 9 16:27:05 2013] fullrun_mos1_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists [Sun Jun 9 16:27:05 2013] Fit fullrun_mos1_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly [Sun Jun 9 16:27:47 2013] Warning, spatial fit 21 centroid is now closest to src. 55 [Sun Jun 9 16:27:47 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 16:27:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 16:27:47 2013] Assessing source extent using major [Sun Jun 9 16:27:47 2013] Source does appear to be extended [Sun Jun 9 16:27:47 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 16:27:47 2013] Source is confused with source 57 [Sun Jun 9 16:28:27 2013] Using EEF radius (= 6.61 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 16:28:27 2013] Initial guess for spatial extent in simple fitting = 6.61" [Sun Jun 9 16:28:27 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.981 [Sun Jun 9 16:28:27 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 6.61" [Sun Jun 9 16:28:27 2013] fullrun_mos1_xmm0111190701_pi300-10000_cl_pass1_src19.ximg exists [Sun Jun 9 16:28:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111190701_pi300-10000_cl_pass1_src19.csv [Sun Jun 9 16:28:27 2013] fullrun_mos1_xmm0111190701_pi300-10000_cl_pass1_src19_1.ximg exists [Sun Jun 9 16:28:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111190701_pi300-10000_cl_pass1_src19.csv [Sun Jun 9 16:28:27 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0111190701_pi300-10000_cl_pass1_src19_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0111190701_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 16:28:28 2013] fullrun_mos1_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src19.ximg exists [Sun Jun 9 16:28:28 2013] fullrun_mos1_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists [Sun Jun 9 16:28:28 2013] Fit fullrun_mos1_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly [Sun Jun 9 16:29:00 2013] Source 18 is offset by 5.869459 and 5.043531 pixels which is larger than 2 X fitted extent = 4.590138 x 4.590138, not incorporating fit results [Sun Jun 9 16:29:00 2013] Spatial fit model total counts = 2490.600000, observed total counts = 2486.000000 [Sun Jun 9 16:29:00 2013] Offset between fit and detection position for source 18 = 0.580065 pixels [Sun Jun 9 16:29:00 2013] Warning, changing simple spatial fit ID from 19 to 34 [Sun Jun 9 16:29:00 2013] 2391.636000 total counts/ 2220.670000 bgd. counts: snr = 3.628004 Spatial fit parameters: Offset between fit and detection position for source 18 = 0.580065 pixels Position = (302.4, 296.4) = 12 42 45.36 2 42 45.1 Extent = 18.9 (5.6-26.4)" x 8.7 (4.0-25.3)", rotation angle = 0 (360-0) degrees Source counts = 171.0 +/- 48.9 Background counts = 2220.7 Rate = 0.003 +/- 0.0008 [Sun Jun 9 16:29:01 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 16:29:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 16:29:01 2013] Assessing source extent using major axis lower bound [Sun Jun 9 16:29:01 2013] Source does appear to be extended [Sun Jun 9 16:29:01 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.22 [Sun Jun 9 17:06:03 2013] XMMSAS src. selection expression = ellipse(26263.696000, 25740.580000, 1131.096033, 519.925215, 0.000000, X, Y) [Sun Jun 9 17:06:03 2013] Not overwriting source region fullrun_mos1_xmm0111190701_pi300-10000_pass1_cl_src18_src.reg [Sun Jun 9 17:06:03 2013] Extracting stamp from image fullrun_mos1_xmm0111190701_pi300-10000_cl_sm2.00.img.gz, (237, 231) - (367, 361) [Sun Jun 9 17:06:03 2013] XMMSAS bgd. selection expression = annulus(26263.696000, 25740.580000, 1885.160054, 3770.320108, X, Y) && !ellipse(24892.886800, 23936.413000, 2757.432079, 2757.432079, 0.000000, X, Y) && !ellipse(27570.861800, 22833.469000, 600.024817, 302.892809, 337.688000, X, Y) && !ellipse(25945.812000, 22894.998000, 1253.752036, 1253.752036, 0.000000, X, Y) && !ellipse(24935.514191, 21659.318222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27109.635376, 24043.756226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27855.310974, 23469.802612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26747.618000, 21989.910000, 2507.504072, 2507.504072, 0.000000, X, Y) && !ellipse(23841.365997, 21148.562271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21826.194778, 21936.139542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26840.688000, 26319.306000, 1057.608030, 1057.608030, 0.000000, X, Y) && !ellipse(26845.005951, 25777.782410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26462.758728, 21356.356812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27945.345673, 24233.362488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27302.530000, 21618.026000, 973.208028, 973.208028, 0.000000, X, Y) [Sun Jun 9 17:06:03 2013] Writing fullrun_mos1_xmm0111190701_pi300-10000_pass1_cl_src18.gif [Sun Jun 9 17:06:04 2013] ../../xmm0111190701/products/events/fullrun_mos1_xmm0111190701_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0111190701/products/events/fullrun_mos1_xmm0111190701_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create [Sun Jun 9 17:06:04 2013] Mean detx,y = (-1103.84, -1488.74) [Sun Jun 9 17:06:04 2013] ../../xmm0111190701/products/images/fullrun_mos1_xmm0111190701_pi300-10000_pass1_cl_src18_src.img and ../../xmm0111190701/products/images/fullrun_mos1_xmm0111190701_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create [Sun Jun 9 17:06:04 2013] ../../xmm0111190701/products/spectra/fullrun_mos1_xmm0111190701_pi300-10000_pass1_cl_src18_src.pi and ../../xmm0111190701/products/spectra/fullrun_mos1_xmm0111190701_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create [Sun Jun 9 17:06:04 2013] Setting source spectrum file to fullrun_mos1_xmm0111190701_pi300-10000_pass1_cl_src18_src.pi.gz [Sun Jun 9 17:06:04 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111190701_pi300-10000_pass1_cl_src18_bgd.pi.gz [Sun Jun 9 17:06:04 2013] ../../xmm0111190701/products/lightcurves/fullrun_mos1_xmm0111190701_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0111190701/products/lightcurves/fullrun_mos1_xmm0111190701_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create [Sun Jun 9 17:08:09 2013] Updating aperture counts using extracted products [Sun Jun 9 17:08:09 2013] Total counts from fullrun_mos1_xmm0111190701_pi300-10000_pass1_cl_src18_src.pi.gz = 2617.00 [Sun Jun 9 17:08:10 2013] Total counts from fullrun_mos1_xmm0111190701_pi300-10000_pass1_cl_src18_bgd.pi.gz = 8374.00 [Sun Jun 9 17:08:10 2013] Got source and background scale factors 1846400.000000, 18727696.000000 [Sun Jun 9 17:08:10 2013] User source parameters: Position = (302.4, 296.4) = 12 42 45.36 2 42 45.1 Extent = 18.9 (5.6-26.4)" x 8.7 (4.0-25.3)", rotation angle = 0 (360-0) degrees Source aperture counts = 1791.4 +/- 52.2 Background aperture counts = 825.6 Rate = 0.03 +/- 0.0008 [Sun Jun 9 17:08:13 2013] No arf file for this source, not re-computing flux [Sun Jun 9 17:08:25 2013] Flag b found in src. 18 procflags, skipping spectral fitting [Sun Jun 9 17:08:25 2013] Flag c found in src. 18 procflags, skipping spectral fitting [Sun Jun 9 17:08:25 2013] Source 18 has no response, skipping [Sun Jun 9 17:08:26 2013] xmm0111190701/analysis//spectral/fullrun_mos1_xmm0111190701_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete