[Tue Jun 25 01:08:43 2013] Detection parameters:
  Position = (464.9, 200.3) = 20 39 26.97 -1 0 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.0 +/- 8.5
  Background counts = 10.0
  Rate = 0.002 +/- 0.0005

[Tue Jun 25 01:08:43 2013] Off-axis axis estimate = 14.01'
[Tue Jun 25 02:38:13 2013] Using EEF radius (= 13.43 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 02:38:13 2013] Initial guess for spatial extent in simple fitting = 13.43"
[Tue Jun 25 02:38:13 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.952
[Tue Jun 25 02:38:13 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 13.43"
[Tue Jun 25 02:58:51 2013] fullrun_mos2_xmm0111180201_pi300-10000_cl_pass0_src6.ximg exists
[Tue Jun 25 02:58:51 2013] fullrun_mos2_xmm0111180201_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Jun 25 02:58:51 2013] Fit fullrun_mos2_xmm0111180201_pi300-10000_cl_pass0_src6 appears to have run properly
[Tue Jun 25 02:58:51 2013] fullrun_mos2_xmm0111180201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Jun 25 02:58:51 2013] fullrun_mos2_xmm0111180201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Jun 25 02:58:51 2013] Fit fullrun_mos2_xmm0111180201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Tue Jun 25 02:59:06 2013] Spatial fit model total counts = 169.881000, observed total counts = 164.000000
[Tue Jun 25 02:59:06 2013] Offset between fit and detection position for source 6 = 3.031218 pixels
[Tue Jun 25 02:59:06 2013] 171.467300 total counts/ 82.730100 bgd. counts: snr = 9.756048
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 3.031218 pixels
  Position = (465.9, 197.5) = 20 39 26.68 -1 0 37.8
  Extent = 25.6 (23.0-26.9)" x 14.0 (7.5-23.9)", rotation angle = 69 (218-283) degrees
  Source counts = 88.7 +/- 13.1
  Background counts = 82.7
  Rate = 0.005 +/- 0.0008
[Tue Jun 25 02:59:06 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 02:59:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 02:59:06 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 02:59:06 2013] Source does appear to be extended
[Tue Jun 25 02:59:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.96
[Tue Jun 25 04:18:47 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 25 04:18:47 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 25 04:18:47 2013] Initial guess for spatial extent in simple fitting = 19.77"
[Tue Jun 25 04:18:47 2013] source mask rpix=4.5, npix_max = 101, mask sum = 102, frac = 1.002
[Tue Jun 25 04:18:47 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 19.77"
[Tue Jun 25 04:35:38 2013] fullrun_mos2_xmm0111180201_pi300-10000_cl_pass1_src6.ximg exists
[Tue Jun 25 04:35:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111180201_pi300-10000_cl_pass1_src6.csv
[Tue Jun 25 04:35:38 2013] fullrun_mos2_xmm0111180201_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Jun 25 04:35:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111180201_pi300-10000_cl_pass1_src6.csv
[Tue Jun 25 04:35:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111180201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111180201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 04:35:38 2013] fullrun_mos2_xmm0111180201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Jun 25 04:35:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111180201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue Jun 25 04:35:38 2013] fullrun_mos2_xmm0111180201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Jun 25 04:35:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111180201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue Jun 25 04:35:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111180201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111180201_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 04:35:46 2013] Spatial fit model total counts = 290.920000, observed total counts = 219.000000
[Tue Jun 25 04:35:46 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 25 04:35:46 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 04:35:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 04:35:46 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 04:35:46 2013] Source does appear to be extended
[Tue Jun 25 04:35:46 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.96
[Tue Jun 25 04:58:29 2013] XMMSAS src. selection expression = ellipse(40482.297800, 17132.152000, 1533.630044, 838.674024, 69.377683, X, Y)
[Tue Jun 25 04:58:29 2013] Writing source region out to fullrun_mos2_xmm0111180201_pi300-10000_pass1_cl_src6_src.reg
[Tue Jun 25 04:58:29 2013] Extracting stamp from image fullrun_mos2_xmm0111180201_pi300-10000_cl_sm2.00.img.gz, (378, 109) - (554, 286)
[Tue Jun 25 04:58:29 2013] XMMSAS bgd. selection expression = annulus(40482.297800, 17132.152000, 2556.050074, 5112.100147, X, Y)
[Tue Jun 25 04:58:29 2013] Writing fullrun_mos2_xmm0111180201_pi300-10000_pass1_cl_src6.gif
[Tue Jun 25 05:02:30 2013] Mean detx,y = (-15178.14, -5793.53) 
[Tue Jun 25 05:02:31 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 05:03:14 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 05:03:15 2013] Setting source spectrum file to fullrun_mos2_xmm0111180201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jun 25 05:03:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111180201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Jun 25 05:07:16 2013] Not generating rmf since there are only 88 counts
[Tue Jun 25 05:07:16 2013] rmf not generated due to insufficient counts