[Tue Jun 19 16:50:15 2012] Detection parameters:
  Position = (309.3, 307.1) = 6 33 52.39 17 45 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 216.5 +/- 40.0
  Background counts = 704.5
  Rate = 0.003 +/- 0.0006

[Tue Jun 19 16:50:15 2012] Off-axis axis estimate = 1.00'
[Tue Jun 19 17:13:09 2012] Using EEF radius (= 6.93 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 17:13:09 2012] Initial guess for spatial extent in simple fitting = 6.93"
[Tue Jun 19 17:13:09 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.913
[Tue Jun 19 17:13:09 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 6.93"
[Tue Jun 19 17:25:33 2012] fullrun_pn_xmm0111170101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jun 19 17:25:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111170101_pi300-10000_cl_pass0_src3.csv
[Tue Jun 19 17:25:33 2012] fullrun_pn_xmm0111170101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jun 19 17:25:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111170101_pi300-10000_cl_pass0_src3.csv
[Tue Jun 19 17:25:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111170101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111170101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 17:25:33 2012] fullrun_pn_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jun 19 17:25:33 2012] fullrun_pn_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jun 19 17:25:33 2012] Fit fullrun_pn_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jun 19 18:24:23 2012] Source 3 is offset by 6.186565 and -7.297680 pixels which is larger than
2 X fitted extent = 4.963402 x 4.963402, not incorporating fit results
[Tue Jun 19 18:24:23 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 18:24:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 18:24:23 2012] Assessing source extent using major
[Tue Jun 19 18:24:23 2012] Source does appear to be extended
[Tue Jun 19 18:24:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 18:24:37 2012] Using EEF radius (= 6.93 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 18:24:37 2012] Initial guess for spatial extent in simple fitting = 6.93"
[Tue Jun 19 18:24:37 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.913
[Tue Jun 19 18:24:37 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.93"
[Tue Jun 19 18:49:24 2012] fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jun 19 18:49:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_src3.csv
[Tue Jun 19 18:49:24 2012] fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jun 19 18:49:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_src3.csv
[Tue Jun 19 18:49:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 18:49:25 2012] fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun 19 18:49:25 2012] fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun 19 18:49:25 2012] Fit fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jun 19 19:44:25 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.008200 pixels away
[Tue Jun 19 19:44:25 2012] Source 3 is offset by 6.191645 and -7.297680 pixels which is larger than
2 X fitted extent = 4.950161 x 4.950161, not incorporating fit results
[Tue Jun 19 19:44:25 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 19:44:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 19:44:25 2012] Assessing source extent using major
[Tue Jun 19 19:44:25 2012] Source does appear to be extended
[Tue Jun 19 19:44:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 19:44:39 2012] XMMSAS src. selection expression = ellipse(26858.427124, 26667.081818, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 19 19:44:39 2012] Writing source region out to fullrun_pn_xmm0111170101_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 19 19:44:39 2012] Extracting stamp from image fullrun_pn_xmm0111170101_pi300-10000_cl_sm2.00.img.gz, (272, 270) - (347, 345)
[Tue Jun 19 19:44:39 2012] XMMSAS bgd. selection expression = annulus(26858.427124, 26667.081818, 1087.500000, 2175.000000, X, Y) && !ellipse(26290.300400, 27947.787800, 1355.616039, 1355.616039, 0.000000, X, Y) && !ellipse(25183.342000, 26560.984000, 1097.664032, 1097.664032, 0.000000, X, Y) && !ellipse(24633.764801, 27372.738159, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 19 19:44:39 2012] Writing fullrun_pn_xmm0111170101_pi300-10000_pass1_cl_src3.gif
[Tue Jun 19 20:28:41 2012] Mean detx,y = (85.50, 1118.91) 
[Tue Jun 19 20:29:11 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 20:29:29 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 20:29:29 2012] Setting source spectrum file to fullrun_pn_xmm0111170101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 19 20:29:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111170101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 19 21:09:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 19 21:09:57 2012] rmf not generated due to insufficient counts
[Tue Jun 19 21:53:07 2012] Updating aperture counts using extracted products
[Tue Jun 19 21:53:07 2012] Error reading totcts from fullrun_pn_xmm0111170101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 19 21:53:07 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 21:53:07 2012] Using photon index=1.80, rate=0.00309, arf fullrun_pn_xmm0111170101_pi300-10000_pass1_cl_src3.arf
[Tue Jun 19 21:53:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 21:53:07 2012] Updating source flux to 7.5e-15
[Tue Jun 19 21:53:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting