[Tue Jun 19 16:50:15 2012] Detection parameters:
  Position = (295.9, 310.1) = 6 33 56.46 17 45 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 193.3 +/- 39.1
  Background counts = 687.0
  Rate = 0.003 +/- 0.0006

[Tue Jun 19 16:50:15 2012] Off-axis axis estimate = 0.86'
[Tue Jun 19 17:13:09 2012] Using EEF radius (= 6.86 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 17:13:09 2012] Initial guess for spatial extent in simple fitting = 6.86"
[Tue Jun 19 17:13:09 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.927
[Tue Jun 19 17:13:09 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 6.86"
[Tue Jun 19 17:25:33 2012] fullrun_pn_xmm0111170101_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jun 19 17:25:33 2012] fullrun_pn_xmm0111170101_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jun 19 17:25:33 2012] Fit fullrun_pn_xmm0111170101_pi300-10000_cl_pass0_src2 appears to have run properly
[Tue Jun 19 17:25:33 2012] fullrun_pn_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jun 19 17:25:33 2012] fullrun_pn_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jun 19 17:25:33 2012] Fit fullrun_pn_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Jun 19 18:24:23 2012] Spatial fit model total counts = 9037.580000, observed total counts = 9036.000000
[Tue Jun 19 18:24:23 2012] Offset between fit and detection position for source 2 = 7.236049 pixels
[Tue Jun 19 18:24:23 2012] 9362.394000 total counts/ 8757.490000 bgd. counts: snr = 6.463930
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 7.236049 pixels
  Position = (290.0, 305.9) = 6 33 58.25 17 45 4.6
  Extent = 13.7 (13.7-27.4)", rotation angle = 0
  Source counts = 604.9 +/- 96.8
  Background counts = 8757.5
  Rate = 0.006 +/- 0.001
[Tue Jun 19 18:24:23 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 18:24:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 18:24:23 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 18:24:23 2012] Source does appear to be extended
[Tue Jun 19 18:24:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 18:24:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 19 18:24:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 18:24:37 2012] Initial guess for spatial extent in simple fitting = 13.72"
[Tue Jun 19 18:24:37 2012] source mask rpix=3.2, npix_max = 53, mask sum = 64, frac = 1.198
[Tue Jun 19 18:24:37 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 13.72"
[Tue Jun 19 18:49:24 2012] fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jun 19 18:49:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_src2.csv
[Tue Jun 19 18:49:24 2012] fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jun 19 18:49:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_src2.csv
[Tue Jun 19 18:49:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 18:49:25 2012] fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jun 19 18:49:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Jun 19 18:49:25 2012] fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jun 19 18:49:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Jun 19 18:49:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 19:44:25 2012] Warning, spatial fit 2 centroid is now closest to src. 3
[Tue Jun 19 19:44:25 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 19:44:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 19:44:25 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 19:44:25 2012] Source does appear to be extended
[Tue Jun 19 19:44:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 19:44:39 2012] XMMSAS src. selection expression = ellipse(25183.342000, 26560.984000, 823.248024, 823.248024, 0.000000, X, Y)
[Tue Jun 19 19:44:39 2012] Writing source region out to fullrun_pn_xmm0111170101_pi300-10000_pass1_cl_src2_src.reg
[Tue Jun 19 19:44:39 2012] Extracting stamp from image fullrun_pn_xmm0111170101_pi300-10000_cl_sm2.00.img.gz, (243, 259) - (337, 353)
[Tue Jun 19 19:44:39 2012] XMMSAS bgd. selection expression = annulus(25183.342000, 26560.984000, 1372.080039, 2744.160079, X, Y) && !ellipse(26290.300400, 27947.787800, 1355.616039, 1355.616039, 0.000000, X, Y) && !ellipse(26858.427124, 26667.081818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24633.764801, 27372.738159, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 19 19:44:39 2012] Writing fullrun_pn_xmm0111170101_pi300-10000_pass1_cl_src2.gif
[Tue Jun 19 20:14:38 2012] Mean detx,y = (-1405.81, 574.72) 
[Tue Jun 19 20:15:06 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 20:15:30 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 20:15:31 2012] Setting source spectrum file to fullrun_pn_xmm0111170101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 19 20:15:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111170101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jun 19 21:53:07 2012] Updating aperture counts using extracted products
[Tue Jun 19 21:53:07 2012] Error reading totcts from fullrun_pn_xmm0111170101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 19 21:53:07 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 21:53:07 2012] Using photon index=1.80, rate=0.00594, arf fullrun_pn_xmm0111170101_pi300-10000_pass1_cl_src2.arf
[Tue Jun 19 21:53:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 21:53:07 2012] Updating source flux to 1.7e-14