[Tue Jun 19 16:51:02 2012] Detection parameters:
  Position = (353.3, 505.7) = 6 33 38.97 17 59 34.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 194.6 +/- 20.8
  Background counts = 70.6
  Rate = 0.002 +/- 0.0002

[Tue Jun 19 16:51:02 2012] Off-axis axis estimate = 15.55'
[Tue Jun 19 17:57:29 2012] Using EEF radius (= 14.20 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 17:57:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 17:57:29 2012] Initial guess for spatial extent in simple fitting = 14.20"
[Tue Jun 19 17:57:29 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.988
[Tue Jun 19 17:57:29 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 14.20"
[Tue Jun 19 18:24:21 2012] fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_src10.ximg exists
[Tue Jun 19 18:24:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_src10.csv
[Tue Jun 19 18:24:21 2012] fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Jun 19 18:24:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_src10.csv
[Tue Jun 19 18:24:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 18:24:21 2012] fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Jun 19 18:24:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue Jun 19 18:24:21 2012] fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Jun 19 18:24:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue Jun 19 18:24:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 18:24:31 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 13.869895 pixels away
[Tue Jun 19 18:24:31 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 18:24:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 18:24:31 2012] Assessing source extent using major
[Tue Jun 19 18:24:31 2012] Source does appear to be extended
[Tue Jun 19 18:24:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 19:18:58 2012] Using EEF radius (= 14.20 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 19:18:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 19:18:58 2012] Initial guess for spatial extent in simple fitting = 14.20"
[Tue Jun 19 19:18:58 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.988
[Tue Jun 19 19:18:58 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 14.20"
[Tue Jun 19 19:44:23 2012] fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_src10.ximg exists
[Tue Jun 19 19:44:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_src10.csv
[Tue Jun 19 19:44:23 2012] fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Jun 19 19:44:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_src10.csv
[Tue Jun 19 19:44:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 19:44:24 2012] fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Jun 19 19:44:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Jun 19 19:44:24 2012] fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Jun 19 19:44:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Jun 19 19:44:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 19:44:33 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 15.977644 pixels away
[Tue Jun 19 19:44:33 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 19:44:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 19:44:33 2012] Assessing source extent using major
[Tue Jun 19 19:44:33 2012] Source does appear to be extended
[Tue Jun 19 19:44:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 21:34:00 2012] XMMSAS src. selection expression = ellipse(30685.094299, 43949.819794, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 19 21:34:00 2012] Writing source region out to fullrun_mos2_xmm0111170101_pi300-10000_pass1_cl_src21_src.reg
[Tue Jun 19 21:34:00 2012] Extracting stamp from image fullrun_mos2_xmm0111170101_pi300-10000_cl_sm2.00.img.gz, (316, 468) - (391, 543)
[Tue Jun 19 21:34:00 2012] XMMSAS bgd. selection expression = annulus(30685.094299, 43949.819794, 1087.500000, 2175.000000, X, Y)
[Tue Jun 19 21:34:00 2012] Writing fullrun_mos2_xmm0111170101_pi300-10000_pass1_cl_src21.gif
[Tue Jun 19 21:37:14 2012] Mean detx,y = (-10036.19, 13171.40) 
[Tue Jun 19 21:37:15 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 21:37:34 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 21:37:34 2012] Setting source spectrum file to fullrun_mos2_xmm0111170101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Jun 19 21:37:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111170101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue Jun 19 21:45:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 19 21:45:47 2012] rmf not generated due to insufficient counts
[Tue Jun 19 21:53:08 2012] Updating aperture counts using extracted products
[Tue Jun 19 21:53:08 2012] Error reading totcts from fullrun_mos2_xmm0111170101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Jun 19 21:53:08 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 21:53:08 2012] Using photon index=1.80, rate=0.0019, arf fullrun_mos2_xmm0111170101_pi300-10000_pass1_cl_src21.arf
[Tue Jun 19 21:53:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 21:53:08 2012] Updating source flux to 6.5e-14
[Tue Jun 19 21:53:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting