[Tue Jun 19 16:51:02 2012] Detection parameters:
  Position = (302.9, 321.9) = 6 33 54.32 17 46 14.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9032.6 +/- 113.3
  Background counts = 107.3
  Rate = 0.09 +/- 0.001

[Tue Jun 19 16:51:02 2012] Off-axis axis estimate = 1.73'
[Tue Jun 19 17:57:29 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 17:57:29 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Tue Jun 19 17:57:29 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Tue Jun 19 17:57:29 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Tue Jun 19 18:24:21 2012] fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 19 18:24:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_src1.csv
[Tue Jun 19 18:24:21 2012] fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 19 18:24:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_src1.csv
[Tue Jun 19 18:24:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 18:24:21 2012] fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 19 18:24:21 2012] fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 19 18:24:21 2012] Fit fullrun_mos2_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 19 18:24:31 2012] Spatial fit model total counts = 7625.260000, observed total counts = 7381.000000
[Tue Jun 19 18:24:31 2012] Offset between fit and detection position for source 1 = 0.142657 pixels
[Tue Jun 19 18:24:31 2012] 7635.610000 total counts/ 2181.980000 bgd. counts: snr = 116.750913
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.142657 pixels
  Position = (302.8, 321.8) = 6 33 54.36 17 46 14.0
  Extent = 5.2 (5.1-5.4)", rotation angle = 0
  Source counts = 5453.6 +/- 87.4
  Background counts = 2182.0
  Rate = 0.06 +/- 0.001
[Tue Jun 19 18:24:31 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 18:24:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 18:24:31 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 18:24:31 2012] Source does appear to be extended
[Tue Jun 19 18:24:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 19:18:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 19 19:18:58 2012] Initial guess for spatial extent in simple fitting = 5.25"
[Tue Jun 19 19:18:58 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.374
[Tue Jun 19 19:18:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.25"
[Tue Jun 19 19:44:23 2012] fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 19 19:44:23 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_src1.csv
[Tue Jun 19 19:44:23 2012] fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 19 19:44:23 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_src1.csv
[Tue Jun 19 19:44:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 19:44:23 2012] fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 19 19:44:23 2012] fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 19 19:44:23 2012] Fit fullrun_mos2_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 19 19:44:33 2012] Spatial fit model total counts = 7595.670000, observed total counts = 7394.000000
[Tue Jun 19 19:44:33 2012] Offset between fit and detection position for source 1 = 0.014891 pixels
[Tue Jun 19 19:44:33 2012] 7668.600000 total counts/ 2247.980000 bgd. counts: snr = 114.328036
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014891 pixels
  Position = (302.8, 321.8) = 6 33 54.36 17 46 13.9
  Extent = 5.2 (5.1-5.3)", rotation angle = 0
  Source counts = 5420.6 +/- 87.6
  Background counts = 2248.0
  Rate = 0.06 +/- 0.001
[Tue Jun 19 19:44:33 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 19:44:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 19:44:33 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 19:44:33 2012] Source does appear to be extended
[Tue Jun 19 19:44:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 21:34:00 2012] Counts = 5420.620000, rescaling region sizes by 2.000000
[Tue Jun 19 21:34:00 2012] XMMSAS src. selection expression = ellipse(26294.253400, 27947.753460, 624.894018, 624.894018, 0.000000, X, Y)
[Tue Jun 19 21:34:00 2012] Writing source region out to fullrun_mos2_xmm0111170101_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 19 21:34:00 2012] Extracting stamp from image fullrun_mos2_xmm0111170101_pi300-10000_cl_sm2.00.img.gz, (267, 286) - (339, 358)
[Tue Jun 19 21:34:00 2012] XMMSAS bgd. selection expression = annulus(26294.253400, 27947.753460, 2082.980060, 4165.960120, X, Y) && !ellipse(27077.752700, 31022.834200, 549.478416, 549.478416, 0.000000, X, Y) && !ellipse(25687.105194, 23558.820435, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 19 21:34:00 2012] Writing fullrun_mos2_xmm0111170101_pi300-10000_pass1_cl_src1.gif
[Tue Jun 19 21:34:04 2012] Mean detx,y = (67.59, 99.95) 
[Tue Jun 19 21:34:06 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 21:34:20 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 21:34:20 2012] Setting source spectrum file to fullrun_mos2_xmm0111170101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 19 21:34:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111170101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 19 21:53:07 2012] Updating aperture counts using extracted products
[Tue Jun 19 21:53:07 2012] Error reading totcts from fullrun_mos2_xmm0111170101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 19 21:53:08 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 21:53:08 2012] Using photon index=1.80, rate=0.0606, arf fullrun_mos2_xmm0111170101_pi300-10000_pass1_cl_src1.arf
[Tue Jun 19 21:53:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 21:53:08 2012] Updating source flux to 6.8e-13
[Tue Jun 19 21:53:57 2012] Reading fit data from xmm0111170101/analysis//spectral/fullrun_mos2_xmm0111170101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun 19 21:53:57 2012] Spectral fit parameter nH value = 240612000000.0
[Tue Jun 19 21:53:57 2012] Spectral fit parameter PhoIndex value = 3.02077
[Tue Jun 19 21:53:57 2012] Failed to get F(0.3-8.0) from xmm0111170101/analysis//spectral/fullrun_mos2_xmm0111170101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun 19 21:53:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 21:53:57 2012] Using Nh = 2.4e+11, photon index=3.02, rate=0.0606, arf fullrun_mos2_xmm0111170101_pi300-10000_pass1_cl_src1.arf
[Tue Jun 19 21:53:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 21:53:57 2012] Updating source flux to 5.2e-13