[Tue Jun 19 16:50:39 2012] Detection parameters:
  Position = (435.5, 176.0) = 6 33 14.00 17 35 38.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.0 +/- 17.7
  Background counts = 60.2
  Rate = 0.001 +/- 0.0002

[Tue Jun 19 16:50:39 2012] Off-axis axis estimate = 13.32'
[Tue Jun 19 17:25:33 2012] Using EEF radius (= 13.09 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 17:25:33 2012] Initial guess for spatial extent in simple fitting = 13.09"
[Tue Jun 19 17:25:33 2012] source mask rpix=3.0, npix_max = 49, mask sum = 39, frac = 0.792
[Tue Jun 19 17:25:33 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 13.09"
[Tue Jun 19 17:57:29 2012] fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_src16.ximg exists
[Tue Jun 19 17:57:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_src16.csv
[Tue Jun 19 17:57:29 2012] fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Jun 19 17:57:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_src16.csv
[Tue Jun 19 17:57:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 17:57:29 2012] fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Jun 19 17:57:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Jun 19 17:57:29 2012] fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Jun 19 17:57:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Jun 19 17:57:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 18:24:27 2012] Spatial fit model total counts = 415.248000, observed total counts = 309.000000
[Tue Jun 19 18:24:27 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 19 18:24:27 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 18:24:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 18:24:27 2012] Assessing source extent using major
[Tue Jun 19 18:24:27 2012] Source does appear to be extended
[Tue Jun 19 18:24:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 18:49:25 2012] Using EEF radius (= 13.09 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 18:49:25 2012] Initial guess for spatial extent in simple fitting = 13.09"
[Tue Jun 19 18:49:25 2012] source mask rpix=3.0, npix_max = 49, mask sum = 39, frac = 0.792
[Tue Jun 19 18:49:25 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 13.09"
[Tue Jun 19 19:18:58 2012] fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_src16.ximg exists
[Tue Jun 19 19:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_src16.csv
[Tue Jun 19 19:18:58 2012] fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Jun 19 19:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_src16.csv
[Tue Jun 19 19:18:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 19:18:58 2012] fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Jun 19 19:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue Jun 19 19:18:58 2012] fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Jun 19 19:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue Jun 19 19:18:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 19:44:29 2012] Spatial fit model total counts = 438.892000, observed total counts = 309.000000
[Tue Jun 19 19:44:29 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 19 19:44:29 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 19:44:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 19:44:29 2012] Assessing source extent using major
[Tue Jun 19 19:44:29 2012] Source does appear to be extended
[Tue Jun 19 19:44:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 21:10:23 2012] XMMSAS src. selection expression = ellipse(37835.874084, 15260.894089, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 19 21:10:23 2012] Writing source region out to fullrun_mos1_xmm0111170101_pi300-10000_pass1_cl_src18_src.reg
[Tue Jun 19 21:10:23 2012] Extracting stamp from image fullrun_mos1_xmm0111170101_pi300-10000_cl_sm2.00.img.gz, (398, 138) - (473, 213)
[Tue Jun 19 21:10:23 2012] XMMSAS bgd. selection expression = annulus(37835.874084, 15260.894089, 1087.500000, 2175.000000, X, Y)
[Tue Jun 19 21:10:23 2012] Writing fullrun_mos1_xmm0111170101_pi300-10000_pass1_cl_src18.gif
[Tue Jun 19 21:16:44 2012] Mean detx,y = (-15732.52, 5476.04) 
[Tue Jun 19 21:16:45 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 21:17:03 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 21:17:04 2012] Setting source spectrum file to fullrun_mos1_xmm0111170101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Jun 19 21:17:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111170101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Tue Jun 19 21:29:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 19 21:29:12 2012] rmf not generated due to insufficient counts
[Tue Jun 19 21:53:07 2012] Updating aperture counts using extracted products
[Tue Jun 19 21:53:07 2012] Error reading totcts from fullrun_mos1_xmm0111170101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Jun 19 21:53:07 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 21:53:07 2012] Using photon index=1.80, rate=0.00133, arf fullrun_mos1_xmm0111170101_pi300-10000_pass1_cl_src18.arf
[Tue Jun 19 21:53:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 21:53:07 2012] Updating source flux to 4.7e-14
[Tue Jun 19 21:53:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting