[Tue Jun 19 16:50:38 2012] Detection parameters:
  Position = (303.0, 321.9) = 6 33 54.29 17 46 14.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9121.7 +/- 115.7
  Background counts = 107.5
  Rate = 0.09 +/- 0.001

[Tue Jun 19 16:50:39 2012] Off-axis axis estimate = 1.74'
[Tue Jun 19 17:25:33 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 17:25:33 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Tue Jun 19 17:25:33 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Tue Jun 19 17:25:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Tue Jun 19 17:57:28 2012] fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 19 17:57:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_src1.csv
[Tue Jun 19 17:57:28 2012] fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 19 17:57:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_src1.csv
[Tue Jun 19 17:57:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 17:57:29 2012] fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 19 17:57:29 2012] fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 19 17:57:29 2012] Fit fullrun_mos1_xmm0111170101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 19 18:24:27 2012] Spatial fit model total counts = 7351.010000, observed total counts = 7351.000000
[Tue Jun 19 18:24:27 2012] Offset between fit and detection position for source 1 = 0.211485 pixels
[Tue Jun 19 18:24:27 2012] 7350.190000 total counts/ 1949.410000 bgd. counts: snr = 122.322090
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.211485 pixels
  Position = (302.8, 321.9) = 6 33 54.35 17 46 14.2
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 5400.8 +/- 85.7
  Background counts = 1949.4
  Rate = 0.06 +/- 0.001
[Tue Jun 19 18:24:27 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 18:24:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 18:24:27 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 18:24:27 2012] Source does appear to be extended
[Tue Jun 19 18:24:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 18:49:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 19 18:49:25 2012] Initial guess for spatial extent in simple fitting = 5.31"
[Tue Jun 19 18:49:25 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.351
[Tue Jun 19 18:49:25 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.31"
[Tue Jun 19 19:18:58 2012] fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 19 19:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_src1.csv
[Tue Jun 19 19:18:58 2012] fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 19 19:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_src1.csv
[Tue Jun 19 19:18:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 19:18:58 2012] fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 19 19:18:58 2012] fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 19 19:18:58 2012] Fit fullrun_mos1_xmm0111170101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 19 19:44:29 2012] Spatial fit model total counts = 7363.300000, observed total counts = 7364.000000
[Tue Jun 19 19:44:29 2012] Offset between fit and detection position for source 1 = 0.015083 pixels
[Tue Jun 19 19:44:29 2012] 7422.230000 total counts/ 2072.900000 bgd. counts: snr = 117.492519
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.015083 pixels
  Position = (302.8, 321.9) = 6 33 54.36 17 46 14.2
  Extent = 5.2 (5.1-5.4)", rotation angle = 0
  Source counts = 5349.3 +/- 86.2
  Background counts = 2072.9
  Rate = 0.06 +/- 0.001
[Tue Jun 19 19:44:29 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 19:44:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 19:44:29 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 19:44:29 2012] Source does appear to be extended
[Tue Jun 19 19:44:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 21:10:23 2012] Counts = 5349.330000, rescaling region sizes by 2.000000
[Tue Jun 19 21:10:23 2012] XMMSAS src. selection expression = ellipse(26296.830600, 27953.363040, 629.701218, 629.701218, 0.000000, X, Y)
[Tue Jun 19 21:10:23 2012] Writing source region out to fullrun_mos1_xmm0111170101_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 19 21:10:23 2012] Extracting stamp from image fullrun_mos1_xmm0111170101_pi300-10000_cl_sm2.00.img.gz, (267, 286) - (339, 358)
[Tue Jun 19 21:10:23 2012] XMMSAS bgd. selection expression = annulus(26296.830600, 27953.363040, 2099.004060, 4198.008121, X, Y) && !ellipse(27182.539825, 31064.028046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25217.572000, 23443.520000, 1183.496034, 1183.496034, 0.000000, X, Y)
[Tue Jun 19 21:10:23 2012] Writing fullrun_mos1_xmm0111170101_pi300-10000_pass1_cl_src1.gif
[Tue Jun 19 21:10:28 2012] Mean detx,y = (325.47, -226.54) 
[Tue Jun 19 21:10:29 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 21:10:40 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 21:10:40 2012] Setting source spectrum file to fullrun_mos1_xmm0111170101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 19 21:10:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111170101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 19 21:21:31 2012] Warning, no src. light curve found
[Tue Jun 19 21:53:07 2012] Updating aperture counts using extracted products
[Tue Jun 19 21:53:07 2012] Error reading totcts from fullrun_mos1_xmm0111170101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 19 21:53:07 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 21:53:07 2012] Using photon index=1.80, rate=0.0599, arf fullrun_mos1_xmm0111170101_pi300-10000_pass1_cl_src1.arf
[Tue Jun 19 21:53:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 21:53:07 2012] Updating source flux to 6e-13
[Tue Jun 19 21:53:38 2012] Reading fit data from xmm0111170101/analysis//spectral/fullrun_mos1_xmm0111170101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun 19 21:53:38 2012] Spectral fit parameter nH value = 663707000000.0
[Tue Jun 19 21:53:38 2012] Spectral fit parameter PhoIndex value = 3.01587
[Tue Jun 19 21:53:38 2012] Failed to get F(0.3-8.0) from xmm0111170101/analysis//spectral/fullrun_mos1_xmm0111170101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun 19 21:53:38 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 21:53:38 2012] Using Nh = 6.6e+11, photon index=3.02, rate=0.0599, arf fullrun_mos1_xmm0111170101_pi300-10000_pass1_cl_src1.arf
[Tue Jun 19 21:53:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 21:53:38 2012] Updating source flux to 4.6e-13