[Sat May 19 18:19:58 2012] Detection parameters:
  Position = (303.1, 241.1) = 13 34 16.04 50 25 7.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220.9 +/- 21.1
  Background counts = 67.3
  Rate = 0.008 +/- 0.0008

[Sat May 19 18:19:58 2012] Off-axis axis estimate = 4.17'
[Sat May 19 18:23:40 2012] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Sat May 19 18:23:40 2012] Initial guess for spatial extent in simple fitting = 8.52"
[Sat May 19 18:23:40 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.035
[Sat May 19 18:23:40 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 8.52"
[Sat May 19 20:10:51 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_src53.ximg exists
[Sat May 19 20:10:51 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_src53_1.ximg exists
[Sat May 19 20:10:51 2012] Fit fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_src53 appears to have run properly
[Sat May 19 20:10:52 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Sat May 19 20:10:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sat May 19 20:10:52 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Sat May 19 20:10:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sat May 19 20:10:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 00:01:42 2012] Spatial fit model total counts = 630.876000, observed total counts = 568.000000
[Sun May 20 00:01:42 2012] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 20 00:01:42 2012] Vigneting correction estimate = 1.000000
[Sun May 20 00:01:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 00:01:42 2012] Assessing source extent using major
[Sun May 20 00:01:42 2012] Source does appear to be extended
[Sun May 20 00:01:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 00:02:15 2012] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Sun May 20 00:02:15 2012] Initial guess for spatial extent in simple fitting = 8.52"
[Sun May 20 00:02:15 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.035
[Sun May 20 00:02:15 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 8.52"
[Sun May 20 01:18:44 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_src49.ximg exists
[Sun May 20 01:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_src49.csv
[Sun May 20 01:18:44 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_src49_1.ximg exists
[Sun May 20 01:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_src49.csv
[Sun May 20 01:18:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 01:18:45 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Sun May 20 01:18:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Sun May 20 01:18:45 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Sun May 20 01:18:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Sun May 20 01:18:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 04:27:16 2012] Spatial fit model total counts = 630.876000, observed total counts = 568.000000
[Sun May 20 04:27:16 2012] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 20 04:27:16 2012] Vigneting correction estimate = 1.000000
[Sun May 20 04:27:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 04:27:16 2012] Assessing source extent using major
[Sun May 20 04:27:16 2012] Source does appear to be extended
[Sun May 20 04:27:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 04:27:48 2012] XMMSAS src. selection expression = ellipse(26319.103058, 20924.290619, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 20 04:27:48 2012] Writing source region out to fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src53_src.reg
[Sun May 20 04:27:48 2012] Extracting stamp from image fullrun_pn_xmm0111160101_pi300-10000_cl_sm2.00.img.gz, (266, 204) - (341, 279)
[Sun May 20 04:27:48 2012] XMMSAS bgd. selection expression = annulus(26319.103058, 20924.290619, 1087.500000, 2175.000000, X, Y) && !ellipse(26175.309326, 18555.038055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27359.909058, 23702.492035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28805.676056, 22414.375366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26351.467865, 22284.772766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24917.527780, 18989.649800, 495.027214, 495.027214, 0.000000, X, Y)
[Sun May 20 04:27:48 2012] Writing fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src53.gif
[Sun May 20 05:05:22 2012] Mean detx,y = (-4333.36, 5260.39) 
[Sun May 20 05:05:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 05:05:41 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 05:05:41 2012] Setting source spectrum file to fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sun May 20 05:05:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Sun May 20 07:25:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 20 07:25:05 2012] rmf not generated due to insufficient counts
[Sun May 20 08:51:20 2012] Updating aperture counts using extracted products
[Sun May 20 08:51:20 2012] Error reading totcts from fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sun May 20 08:51:20 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 08:51:20 2012] Using photon index=1.80, rate=0.00823, arf fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src53.arf
[Sun May 20 08:51:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 08:51:20 2012] Updating source flux to 3.2e-14
[Sun May 20 08:52:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting