[Sat May 19 18:19:57 2012] Detection parameters:
  Position = (434.4, 371.8) = 13 33 16.07 50 34 34.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 691.7 +/- 32.6
  Background counts = 63.9
  Rate = 0.02 +/- 0.0008

[Sat May 19 18:19:58 2012] Off-axis axis estimate = 11.20'
[Sat May 19 18:23:40 2012] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting
[Sat May 19 18:23:40 2012] Initial guess for spatial extent in simple fitting = 12.03"
[Sat May 19 18:23:40 2012] source mask rpix=2.8, npix_max = 42, mask sum = 43, frac = 1.008
[Sat May 19 18:23:40 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.03"
[Sat May 19 20:10:51 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_src5.ximg exists
[Sat May 19 20:10:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_src5.csv
[Sat May 19 20:10:51 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat May 19 20:10:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_src5.csv
[Sat May 19 20:10:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 20:10:51 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat May 19 20:10:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat May 19 20:10:51 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat May 19 20:10:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat May 19 20:10:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 00:01:42 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.035888 pixels away
[Sun May 20 00:01:42 2012] Vigneting correction estimate = 1.000000
[Sun May 20 00:01:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 00:01:42 2012] Assessing source extent using major
[Sun May 20 00:01:42 2012] Source does appear to be extended
[Sun May 20 00:01:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 00:02:15 2012] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting
[Sun May 20 00:02:15 2012] Initial guess for spatial extent in simple fitting = 12.03"
[Sun May 20 00:02:15 2012] source mask rpix=2.8, npix_max = 42, mask sum = 43, frac = 1.008
[Sun May 20 00:02:15 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 12.03"
[Sun May 20 01:18:44 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_src5.ximg exists
[Sun May 20 01:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_src5.csv
[Sun May 20 01:18:44 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun May 20 01:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_src5.csv
[Sun May 20 01:18:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 01:18:45 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun May 20 01:18:45 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun May 20 01:18:45 2012] Fit fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun May 20 04:27:16 2012] Spatial fit model total counts = 1011.720000, observed total counts = 926.000000
[Sun May 20 04:27:16 2012] Offset between fit and detection position for source 5 = 0.316660 pixels
[Sun May 20 04:27:16 2012] 1007.821000 total counts/ 559.337000 bgd. counts: snr = 18.963137
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.316660 pixels
  Position = (434.1, 371.6) = 13 33 16.19 50 34 34.7
  Extent = 5.6 (5.1-6.2)", rotation angle = 0
  Source counts = 448.5 +/- 31.7
  Background counts = 559.3
  Rate = 0.01 +/- 0.0008
[Sun May 20 04:27:16 2012] Vigneting correction estimate = 1.000000
[Sun May 20 04:27:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 04:27:16 2012] Assessing source extent using major axis lower bound
[Sun May 20 04:27:16 2012] Source does appear to be extended
[Sun May 20 04:27:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 04:27:47 2012] XMMSAS src. selection expression = ellipse(37719.585200, 32278.843800, 333.689410, 333.689410, 0.000000, X, Y)
[Sun May 20 04:27:47 2012] Writing source region out to fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src5_src.reg
[Sun May 20 04:27:47 2012] Extracting stamp from image fullrun_pn_xmm0111160101_pi300-10000_cl_sm2.00.img.gz, (415, 352) - (453, 391)
[Sun May 20 04:27:47 2012] XMMSAS bgd. selection expression = annulus(37719.585200, 32278.843800, 556.149016, 1112.298032, X, Y) && !ellipse(39144.893799, 31531.953064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38873.401123, 33144.832916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40311.782000, 32703.430000, 1972.568057, 1972.568057, 0.000000, X, Y)
[Sun May 20 04:27:47 2012] Writing fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src5.gif
[Sun May 20 04:30:27 2012] Mean detx,y = (11797.59, 5271.41) 
[Sun May 20 04:30:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 04:30:43 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 04:30:43 2012] Setting source spectrum file to fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun May 20 04:30:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun May 20 08:51:19 2012] Updating aperture counts using extracted products
[Sun May 20 08:51:19 2012] Error reading totcts from fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun May 20 08:51:20 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 08:51:20 2012] Using photon index=1.80, rate=0.0114, arf fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src5.arf
[Sun May 20 08:51:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 08:51:20 2012] Updating source flux to 7.4e-14
[Sun May 20 08:53:31 2012] Reading fit data from xmm0111160101/analysis//spectral/fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src5_pl.csv
[Sun May 20 08:53:31 2012] Spectral fit parameter nH value = 6.1477e+12
[Sun May 20 08:53:31 2012] Spectral fit parameter PhoIndex value = 1.86228
[Sun May 20 08:53:31 2012] Failed to get F(0.3-8.0) from xmm0111160101/analysis//spectral/fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Sun May 20 08:53:31 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 08:53:31 2012] Using Nh = 6.1e+12, photon index=1.86, rate=0.0114, arf fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src5.arf
[Sun May 20 08:53:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 08:53:31 2012] Updating source flux to 7.1e-14