[Sat May 19 18:19:57 2012] Detection parameters:
  Position = (264.4, 422.3) = 13 34 33.70 50 38 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.7 +/- 18.9
  Background counts = 63.9
  Rate = 0.006 +/- 0.0008

[Sat May 19 18:19:58 2012] Off-axis axis estimate = 9.31'
[Sat May 19 18:23:40 2012] Using EEF radius (= 11.08 ")to estimate initial spatial extent for simple fitting
[Sat May 19 18:23:40 2012] Initial guess for spatial extent in simple fitting = 11.08"
[Sat May 19 18:23:40 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.969
[Sat May 19 18:23:40 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 11.08"
[Sat May 19 20:10:51 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_src27.ximg exists
[Sat May 19 20:10:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_src27.csv
[Sat May 19 20:10:51 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_src27_1.ximg exists
[Sat May 19 20:10:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_src27.csv
[Sat May 19 20:10:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 20:10:52 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sat May 19 20:10:52 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sat May 19 20:10:52 2012] Fit fullrun_pn_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sun May 20 00:01:42 2012] Warning, spatial fit 27 centroid is now closest to src. 28
[Sun May 20 00:01:42 2012] Spatial fit model total counts = 567.114000, observed total counts = 537.000000
[Sun May 20 00:01:42 2012] Offset between fit and detection position for source 27 = 1.385185 pixels
[Sun May 20 00:01:42 2012] Warning, changing simple spatial fit ID from 27 to 28
[Sun May 20 00:01:42 2012] 567.981000 total counts/ 382.437000 bgd. counts: snr = 9.487832
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 1.385185 pixels
  Position = (264.0, 421.0) = 13 34 33.92 50 38 10.5
  Extent = 21.7 (19.2-43.4)" x 6.8 (5.1-8.7)", rotation angle = 90 (88-90) degrees
  Source counts = 185.5 +/- 23.8
  Background counts = 382.4
  Rate = 0.005 +/- 0.0006
[Sun May 20 00:01:42 2012] Vigneting correction estimate = 1.000000
[Sun May 20 00:01:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 00:01:42 2012] Assessing source extent using major axis lower bound
[Sun May 20 00:01:42 2012] Source does appear to be extended
[Sun May 20 00:01:42 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.21
[Sun May 20 00:01:42 2012] Source is asymmetric
[Sun May 20 00:01:42 2012] Source is confused with source 28
[Sun May 20 00:02:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 20 00:02:15 2012] Initial guess for spatial extent in simple fitting = 14.26"
[Sun May 20 00:02:15 2012] source mask rpix=3.3, npix_max = 57, mask sum = 64, frac = 1.121
[Sun May 20 00:02:15 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 14.26"
[Sun May 20 01:18:44 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_src26.ximg exists
[Sun May 20 01:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_src26.csv
[Sun May 20 01:18:44 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_src26_1.ximg exists
[Sun May 20 01:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_src26.csv
[Sun May 20 01:18:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 01:18:45 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sun May 20 01:18:45 2012] fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sun May 20 01:18:45 2012] Fit fullrun_pn_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Sun May 20 04:27:16 2012] Warning, spatial fit 26 centroid is now closest to src. 26
[Sun May 20 04:27:16 2012] Vigneting correction estimate = 1.000000
[Sun May 20 04:27:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 04:27:16 2012] Assessing source extent using major axis lower bound
[Sun May 20 04:27:16 2012] Source does appear to be extended
[Sun May 20 04:27:16 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.21
[Sun May 20 04:27:16 2012] Source is asymmetric
[Sun May 20 04:27:48 2012] XMMSAS src. selection expression = ellipse(22915.229300, 36574.548000, 1301.004037, 410.144412, 90.000000, X, Y)
[Sun May 20 04:27:48 2012] Writing source region out to fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src27_src.reg
[Sun May 20 04:27:48 2012] Extracting stamp from image fullrun_pn_xmm0111160101_pi300-10000_cl_sm2.00.img.gz, (189, 346) - (339, 496)
[Sun May 20 04:27:48 2012] XMMSAS bgd. selection expression = annulus(22915.229300, 36574.548000, 2168.340062, 4336.680125, X, Y) && !ellipse(19755.298477, 32748.920258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27833.186615, 38738.870789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25698.347820, 37849.838600, 665.366419, 665.366419, 0.000000, X, Y) && !ellipse(27525.426239, 37508.102753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20684.995483, 36679.598206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22869.537916, 36143.038592, 592.792188, 400.752279, 133.891208, X, Y) && !ellipse(20458.555400, 35824.497600, 351.503210, 351.503210, 0.000000, X, Y) && !ellipse(23999.685394, 33085.532837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26137.163254, 32886.656800, 444.150413, 270.364008, 8.624930, X, Y) && !ellipse(27376.521200, 32452.360400, 481.685614, 481.685614, 0.000000, X, Y)
[Sun May 20 04:27:48 2012] Writing fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src27.gif
[Sun May 20 04:51:36 2012] Mean detx,y = (4272.77, -8148.49) 
[Sun May 20 04:51:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 04:52:15 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 04:52:15 2012] Setting source spectrum file to fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun May 20 04:52:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sun May 20 08:51:19 2012] Updating aperture counts using extracted products
[Sun May 20 08:51:19 2012] Error reading totcts from fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun May 20 08:51:20 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 08:51:20 2012] Using photon index=1.80, rate=0.00474, arf fullrun_pn_xmm0111160101_pi300-10000_pass1_cl_src27.arf
[Sun May 20 08:51:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 08:51:20 2012] Updating source flux to 2.1e-14
[Sun May 20 08:52:37 2012] Flag c found in src. 27 procflags, skipping spectral fitting