[Sat May 19 18:21:08 2012] Detection parameters:
  Position = (227.8, 377.0) = 13 34 50.39 50 35 0.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 208.2 +/- 18.0
  Background counts = 19.3
  Rate = 0.007 +/- 0.0006

[Sat May 19 18:21:09 2012] Off-axis axis estimate = 7.65'
[Sat May 19 22:04:30 2012] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Sat May 19 22:04:30 2012] Initial guess for spatial extent in simple fitting = 10.26"
[Sat May 19 22:04:30 2012] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.888
[Sat May 19 22:04:30 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 10.26"
[Sun May 20 00:01:26 2012] fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_src8.ximg exists
[Sun May 20 00:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_src8.csv
[Sun May 20 00:01:26 2012] fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun May 20 00:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_src8.csv
[Sun May 20 00:01:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 00:01:28 2012] fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun May 20 00:01:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun May 20 00:01:28 2012] fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun May 20 00:01:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun May 20 00:01:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 00:02:01 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.998637 pixels away
[Sun May 20 00:02:01 2012] Vigneting correction estimate = 1.000000
[Sun May 20 00:02:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 00:02:01 2012] Assessing source extent using major
[Sun May 20 00:02:01 2012] Source does appear to be extended
[Sun May 20 00:02:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 02:55:58 2012] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Sun May 20 02:55:58 2012] Initial guess for spatial extent in simple fitting = 10.26"
[Sun May 20 02:55:58 2012] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.888
[Sun May 20 02:55:58 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 10.26"
[Sun May 20 04:27:03 2012] fullrun_mos2_xmm0111160101_pi300-10000_cl_pass1_src8.ximg exists
[Sun May 20 04:27:03 2012] fullrun_mos2_xmm0111160101_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun May 20 04:27:03 2012] Fit fullrun_mos2_xmm0111160101_pi300-10000_cl_pass1_src8 appears to have run properly
[Sun May 20 04:27:04 2012] fullrun_mos2_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun May 20 04:27:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun May 20 04:27:04 2012] fullrun_mos2_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun May 20 04:27:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun May 20 04:27:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 04:27:33 2012] Spatial fit model total counts = 339.177000, observed total counts = 318.000000
[Sun May 20 04:27:33 2012] Offset between fit and detection position for source 3 = 0.142233 pixels
[Sun May 20 04:27:33 2012] 340.935000 total counts/ 190.321000 bgd. counts: snr = 10.917469
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.142233 pixels
  Position = (227.8, 376.8) = 13 34 50.42 50 34 58.3
  Extent = 7.3" x 4.1", rotation angle = 329
  Source counts = 150.6 +/- 18.5
  Background counts = 190.3
  Rate = 0.003 +/- 0.0004
[Sun May 20 04:27:33 2012] Vigneting correction estimate = 1.000000
[Sun May 20 04:27:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 04:27:33 2012] Assessing source extent using major
[Sun May 20 04:27:33 2012] Source does appear to be extended
[Sun May 20 04:27:33 2012] Computing asymmetry using major and minor axis, asym = 1.81
[Sun May 20 04:27:33 2012] Source is asymmetric
[Sun May 20 08:05:55 2012] XMMSAS src. selection expression = ellipse(19768.090322, 32735.929833, 439.599730, 243.216782, 329.075236, X, Y)
[Sun May 20 08:05:55 2012] Writing source region out to fullrun_mos2_xmm0111160101_pi300-10000_pass1_cl_src3_src.reg
[Sun May 20 08:05:55 2012] Extracting stamp from image fullrun_mos2_xmm0111160101_pi300-10000_cl_sm2.00.img.gz, (203, 352) - (253, 402)
[Sun May 20 08:05:55 2012] XMMSAS bgd. selection expression = annulus(19768.090322, 32735.929833, 732.666217, 1465.332434, X, Y)
[Sun May 20 08:05:55 2012] Writing fullrun_mos2_xmm0111160101_pi300-10000_pass1_cl_src3.gif
[Sun May 20 08:10:16 2012] Mean detx,y = (828.66, 7550.76) 
[Sun May 20 08:10:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 08:10:28 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 08:10:28 2012] Setting source spectrum file to fullrun_mos2_xmm0111160101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 20 08:10:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111160101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun May 20 08:51:22 2012] Updating aperture counts using extracted products
[Sun May 20 08:51:22 2012] Error reading totcts from fullrun_mos2_xmm0111160101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 20 08:51:22 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 08:51:22 2012] Using photon index=1.80, rate=0.0032, arf fullrun_mos2_xmm0111160101_pi300-10000_pass1_cl_src3.arf
[Sun May 20 08:51:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 08:51:22 2012] Updating source flux to 6.6e-14