[Sat May 19 18:21:08 2012] Detection parameters:
  Position = (331.9, 258.7) = 13 34 2.92 50 26 23.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.0 +/- 15.1
  Background counts = 20.1
  Rate = 0.003 +/- 0.0004

[Sat May 19 18:21:09 2012] Off-axis axis estimate = 3.77'
[Sat May 19 22:04:30 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Sat May 19 22:04:30 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Sat May 19 22:04:30 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.075
[Sat May 19 22:04:30 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.31"
[Sun May 20 00:01:26 2012] fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_src13.ximg exists
[Sun May 20 00:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_src13.csv
[Sun May 20 00:01:26 2012] fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun May 20 00:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_src13.csv
[Sun May 20 00:01:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 00:01:28 2012] fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun May 20 00:01:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun May 20 00:01:28 2012] fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun May 20 00:01:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun May 20 00:01:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 00:02:01 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 11.113178 pixels away
[Sun May 20 00:02:01 2012] Vigneting correction estimate = 1.000000
[Sun May 20 00:02:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 00:02:01 2012] Assessing source extent using major
[Sun May 20 00:02:01 2012] Source does appear to be extended
[Sun May 20 00:02:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 02:55:58 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Sun May 20 02:55:58 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Sun May 20 02:55:58 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.075
[Sun May 20 02:55:58 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.31"
[Sun May 20 04:27:03 2012] fullrun_mos2_xmm0111160101_pi300-10000_cl_pass1_src13.ximg exists
[Sun May 20 04:27:03 2012] fullrun_mos2_xmm0111160101_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun May 20 04:27:03 2012] Fit fullrun_mos2_xmm0111160101_pi300-10000_cl_pass1_src13 appears to have run properly
[Sun May 20 04:27:04 2012] fullrun_mos2_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun May 20 04:27:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun May 20 04:27:04 2012] fullrun_mos2_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun May 20 04:27:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun May 20 04:27:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 04:27:33 2012] Spatial fit model total counts = 301.243000, observed total counts = 285.000000
[Sun May 20 04:27:33 2012] Offset between fit and detection position for source 20 = 0.357898 pixels
[Sun May 20 04:27:33 2012] 302.992300 total counts/ 211.983000 bgd. counts: snr = 6.250795
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.357898 pixels
  Position = (332.0, 258.4) = 13 34 2.86 50 26 23.2
  Extent = 5.3" x 4.8", rotation angle = 352
  Source counts = 91.0 +/- 17.4
  Background counts = 212.0
  Rate = 0.002 +/- 0.0004
[Sun May 20 04:27:33 2012] Vigneting correction estimate = 1.000000
[Sun May 20 04:27:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 04:27:33 2012] Assessing source extent using major
[Sun May 20 04:27:33 2012] Source does appear to be extended
[Sun May 20 04:27:33 2012] Computing asymmetry using major and minor axis, asym = 1.10
[Sun May 20 08:05:55 2012] XMMSAS src. selection expression = ellipse(28836.878441, 22428.123828, 319.700951, 289.987403, 352.068131, X, Y)
[Sun May 20 08:05:55 2012] Writing source region out to fullrun_mos2_xmm0111160101_pi300-10000_pass1_cl_src20_src.reg
[Sun May 20 08:05:55 2012] Extracting stamp from image fullrun_mos2_xmm0111160101_pi300-10000_cl_sm2.00.img.gz, (314, 240) - (350, 277)
[Sun May 20 08:05:55 2012] XMMSAS bgd. selection expression = annulus(28836.878441, 22428.123828, 532.834919, 1065.669838, X, Y) && !ellipse(27382.382200, 23690.636400, 494.411214, 319.268009, 312.463823, X, Y)
[Sun May 20 08:05:55 2012] Writing fullrun_mos2_xmm0111160101_pi300-10000_pass1_cl_src20.gif
[Sun May 20 08:12:01 2012] Mean detx,y = (1535.54, -6146.24) 
[Sun May 20 08:12:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 08:12:10 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 08:12:10 2012] Setting source spectrum file to fullrun_mos2_xmm0111160101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun May 20 08:12:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111160101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sun May 20 08:33:43 2012] Not generating rmf since there are only 91 counts
[Sun May 20 08:33:43 2012] rmf not generated due to insufficient counts
[Sun May 20 08:51:22 2012] Updating aperture counts using extracted products
[Sun May 20 08:51:22 2012] Error reading totcts from fullrun_mos2_xmm0111160101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun May 20 08:51:22 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 08:51:22 2012] Using photon index=1.80, rate=0.00193, arf fullrun_mos2_xmm0111160101_pi300-10000_pass1_cl_src20.arf
[Sun May 20 08:51:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 08:51:22 2012] Updating source flux to 2.8e-14
[Sun May 20 08:51:57 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting