[Sat May 19 18:20:33 2012] Detection parameters:
  Position = (303.3, 316.0) = 13 34 15.92 50 30 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.1 +/- 17.2
  Background counts = 25.7
  Rate = 0.003 +/- 0.0004

[Sat May 19 18:20:34 2012] Off-axis axis estimate = 1.32'
[Sat May 19 20:10:52 2012] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Sat May 19 20:10:52 2012] Initial guess for spatial extent in simple fitting = 7.09"
[Sat May 19 20:10:52 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.882
[Sat May 19 20:10:52 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 7.09"
[Sat May 19 22:04:29 2012] fullrun_mos1_xmm0111160101_pi300-10000_cl_pass0_src18.ximg exists
[Sat May 19 22:04:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111160101_pi300-10000_cl_pass0_src18.csv
[Sat May 19 22:04:29 2012] fullrun_mos1_xmm0111160101_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat May 19 22:04:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111160101_pi300-10000_cl_pass0_src18.csv
[Sat May 19 22:04:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111160101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111160101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 22:04:29 2012] fullrun_mos1_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat May 19 22:04:29 2012] fullrun_mos1_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat May 19 22:04:29 2012] Fit fullrun_mos1_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Sun May 20 00:01:52 2012] Source 39 is offset by 6.831693 and -6.530130 pixels which is larger than
2 X fitted extent = 6.518759 x 6.518759, not incorporating fit results
[Sun May 20 00:01:53 2012] Vigneting correction estimate = 1.000000
[Sun May 20 00:01:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 00:01:53 2012] Assessing source extent using major
[Sun May 20 00:01:53 2012] Source does appear to be extended
[Sun May 20 00:01:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 01:18:45 2012] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Sun May 20 01:18:45 2012] Initial guess for spatial extent in simple fitting = 7.09"
[Sun May 20 01:18:45 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.882
[Sun May 20 01:18:45 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 7.09"
[Sun May 20 02:55:57 2012] fullrun_mos1_xmm0111160101_pi300-10000_cl_pass1_src18.ximg exists
[Sun May 20 02:55:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111160101_pi300-10000_cl_pass1_src18.csv
[Sun May 20 02:55:57 2012] fullrun_mos1_xmm0111160101_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun May 20 02:55:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111160101_pi300-10000_cl_pass1_src18.csv
[Sun May 20 02:55:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111160101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111160101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 02:55:58 2012] fullrun_mos1_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun May 20 02:55:58 2012] fullrun_mos1_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun May 20 02:55:58 2012] Fit fullrun_mos1_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sun May 20 04:27:25 2012] Source 39 is offset by -1.987778 and 5.295365 pixels which is larger than
2 X fitted extent = 1.475090 x 1.475090, not incorporating fit results
[Sun May 20 04:27:25 2012] Source 39 is offset by 0.576523 and -7.524107 pixels which is larger than
2 X fitted extent = 1.306680 x 1.306680, not incorporating fit results
[Sun May 20 04:27:25 2012] Vigneting correction estimate = 1.000000
[Sun May 20 04:27:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 04:27:25 2012] Assessing source extent using major
[Sun May 20 04:27:25 2012] Source does appear to be extended
[Sun May 20 04:27:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 07:26:05 2012] XMMSAS src. selection expression = ellipse(26339.727325, 27443.032715, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 20 07:26:05 2012] Writing source region out to fullrun_mos1_xmm0111160101_pi300-10000_pass1_cl_src39_src.reg
[Sun May 20 07:26:05 2012] Extracting stamp from image fullrun_mos1_xmm0111160101_pi300-10000_cl_sm2.00.img.gz, (266, 278) - (341, 353)
[Sun May 20 07:26:05 2012] XMMSAS bgd. selection expression = annulus(26339.727325, 27443.032715, 1087.500000, 2175.000000, X, Y) && !ellipse(25537.363220, 27957.565400, 1026.664030, 1026.664030, 0.000000, X, Y) && !ellipse(26263.050000, 28264.727200, 538.526415, 313.417609, 78.089000, X, Y) && !ellipse(24352.074158, 30157.991333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24290.581024, 27989.753693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27263.504020, 28236.179800, 489.492814, 489.492814, 0.000000, X, Y) && !ellipse(24991.819397, 26953.734711, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 20 07:26:05 2012] Writing fullrun_mos1_xmm0111160101_pi300-10000_pass1_cl_src39.gif
[Sun May 20 07:31:44 2012] Mean detx,y = (-492.18, -18.62) 
[Sun May 20 07:31:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 07:31:54 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 07:31:54 2012] Setting source spectrum file to fullrun_mos1_xmm0111160101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun May 20 07:31:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111160101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sun May 20 08:01:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 20 08:01:40 2012] rmf not generated due to insufficient counts
[Sun May 20 08:51:21 2012] Updating aperture counts using extracted products
[Sun May 20 08:51:21 2012] Error reading totcts from fullrun_mos1_xmm0111160101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun May 20 08:51:21 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 08:51:21 2012] Using photon index=1.80, rate=0.00293, arf fullrun_mos1_xmm0111160101_pi300-10000_pass1_cl_src39.arf
[Sun May 20 08:51:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 08:51:21 2012] Updating source flux to 2.8e-14
[Sun May 20 08:51:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting