[Sat May 19 18:20:33 2012] Detection parameters:
  Position = (186.0, 436.1) = 13 35 9.57 50 39 17.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3713.1 +/- 72.4
  Background counts = 20.2
  Rate = 0.08 +/- 0.002

[Sat May 19 18:20:34 2012] Off-axis axis estimate = 12.89'
[Sat May 19 20:10:52 2012] Using EEF radius (= 12.87 ")to estimate initial spatial extent for simple fitting
[Sat May 19 20:10:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 19 20:10:52 2012] Initial guess for spatial extent in simple fitting = 12.87"
[Sat May 19 20:10:52 2012] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.878
[Sat May 19 20:10:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.87"
[Sat May 19 22:04:28 2012] fullrun_mos1_xmm0111160101_pi300-10000_cl_pass0_src1.ximg exists
[Sat May 19 22:04:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111160101_pi300-10000_cl_pass0_src1.csv
[Sat May 19 22:04:28 2012] fullrun_mos1_xmm0111160101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat May 19 22:04:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111160101_pi300-10000_cl_pass0_src1.csv
[Sat May 19 22:04:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111160101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111160101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 22:04:29 2012] fullrun_mos1_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat May 19 22:04:29 2012] fullrun_mos1_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat May 19 22:04:29 2012] Fit fullrun_mos1_xmm0111160101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 20 00:01:52 2012] Spatial fit model total counts = 3839.010000, observed total counts = 3830.000000
[Sun May 20 00:01:52 2012] Offset between fit and detection position for source 11 = 0.124121 pixels
[Sun May 20 00:01:52 2012] 3842.869000 total counts/ 992.909000 bgd. counts: snr = 90.444891
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.124121 pixels
  Position = (186.0, 436.2) = 13 35 9.59 50 39 16.3
  Extent = 7.2 (7.0-7.5)", rotation angle = 0
  Source counts = 2850.0 +/- 62.0
  Background counts = 992.9
  Rate = 0.06 +/- 0.001
[Sun May 20 00:01:53 2012] Vigneting correction estimate = 1.000000
[Sun May 20 00:01:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 00:01:53 2012] Assessing source extent using major axis lower bound
[Sun May 20 00:01:53 2012] Source does appear to be extended
[Sun May 20 00:01:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 01:18:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 20 01:18:45 2012] Initial guess for spatial extent in simple fitting = 7.20"
[Sun May 20 01:18:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.861
[Sun May 20 01:18:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.20"
[Sun May 20 02:55:57 2012] fullrun_mos1_xmm0111160101_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 20 02:55:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111160101_pi300-10000_cl_pass1_src1.csv
[Sun May 20 02:55:57 2012] fullrun_mos1_xmm0111160101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 20 02:55:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111160101_pi300-10000_cl_pass1_src1.csv
[Sun May 20 02:55:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111160101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111160101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 02:55:58 2012] fullrun_mos1_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 20 02:55:58 2012] fullrun_mos1_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 20 02:55:58 2012] Fit fullrun_mos1_xmm0111160101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May 20 04:27:25 2012] Spatial fit model total counts = 3485.270000, observed total counts = 3494.000000
[Sun May 20 04:27:25 2012] Offset between fit and detection position for source 11 = 0.015414 pixels
[Sun May 20 04:27:25 2012] 3480.851000 total counts/ 826.251000 bgd. counts: snr = 92.351317
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.015414 pixels
  Position = (186.0, 436.3) = 13 35 9.59 50 39 16.4
  Extent = 6.6 (6.4-6.9)", rotation angle = 0
  Source counts = 2654.6 +/- 59.0
  Background counts = 826.3
  Rate = 0.06 +/- 0.001
[Sun May 20 04:27:25 2012] Vigneting correction estimate = 1.000000
[Sun May 20 04:27:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 04:27:25 2012] Assessing source extent using major axis lower bound
[Sun May 20 04:27:25 2012] Source does appear to be extended
[Sun May 20 04:27:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 07:26:05 2012] Counts = 2654.600000, rescaling region sizes by 2.000000
[Sun May 20 07:26:05 2012] XMMSAS src. selection expression = ellipse(16132.531754, 37905.694400, 793.923623, 793.923623, 0.000000, X, Y)
[Sun May 20 07:26:05 2012] Writing source region out to fullrun_mos1_xmm0111160101_pi300-10000_pass1_cl_src11_src.reg
[Sun May 20 07:26:05 2012] Extracting stamp from image fullrun_mos1_xmm0111160101_pi300-10000_cl_sm2.00.img.gz, (140, 391) - (232, 482)
[Sun May 20 07:26:05 2012] XMMSAS bgd. selection expression = annulus(16132.531754, 37905.694400, 2646.412076, 5292.824152, X, Y) && !ellipse(19779.207016, 32753.170959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20443.878600, 35819.350400, 370.939211, 370.939211, 0.000000, X, Y) && !ellipse(19993.337200, 37644.311400, 541.349194, 541.349194, 0.000000, X, Y) && !ellipse(11423.707687, 32952.311432, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 20 07:26:05 2012] Writing fullrun_mos1_xmm0111160101_pi300-10000_pass1_cl_src11.gif
[Sun May 20 07:26:09 2012] Mean detx,y = (13992.75, 69.74) 
[Sun May 20 07:26:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 07:26:53 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 07:26:53 2012] Setting source spectrum file to fullrun_mos1_xmm0111160101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun May 20 07:26:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111160101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun May 20 08:51:20 2012] Updating aperture counts using extracted products
[Sun May 20 08:51:20 2012] Error reading totcts from fullrun_mos1_xmm0111160101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun May 20 08:51:21 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 08:51:21 2012] Using photon index=1.80, rate=0.0565, arf fullrun_mos1_xmm0111160101_pi300-10000_pass1_cl_src11.arf
[Sun May 20 08:51:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 08:51:21 2012] Updating source flux to 1.2e-12
[Sun May 20 08:51:57 2012] Reading fit data from xmm0111160101/analysis//spectral/fullrun_mos1_xmm0111160101_pi300-10000_pass1_cl_src11_pl.csv
[Sun May 20 08:51:57 2012] Spectral fit parameter nH value = 5.14438e+21
[Sun May 20 08:51:57 2012] Spectral fit parameter PhoIndex value = 6.15152
[Sun May 20 08:51:57 2012] Failed to get F(0.3-8.0) from xmm0111160101/analysis//spectral/fullrun_mos1_xmm0111160101_pi300-10000_pass1_cl_src11_pl.csv, possibly due to different flux energy range selected
[Sun May 20 08:51:57 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 08:51:57 2012] Using Nh = 5.1e+21, photon index=6.15, rate=0.0565, arf fullrun_mos1_xmm0111160101_pi300-10000_pass1_cl_src11.arf
[Sun May 20 08:51:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 08:51:57 2012] Updating source flux to 7e-13