[Wed Jun  6 20:39:52 2012] Detection parameters:
  Position = (213.8, 308.5) = 9 26 22.97 -47 55 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 287.1 +/- 20.4
  Background counts = 22.8
  Rate = 0.007 +/- 0.0005

[Wed Jun  6 20:39:52 2012] Off-axis axis estimate = 6.18'
[Wed Jun  6 22:17:55 2012] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Wed Jun  6 22:17:55 2012] Initial guess for spatial extent in simple fitting = 9.52"
[Wed Jun  6 22:17:55 2012] source mask rpix=2.2, npix_max = 28, mask sum = 26, frac = 0.900
[Wed Jun  6 22:17:55 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.52"
[Wed Jun  6 22:50:48 2012] fullrun_mos2_xmm0111150201_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jun  6 22:50:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111150201_pi300-10000_cl_pass0_src2.csv
[Wed Jun  6 22:50:48 2012] fullrun_mos2_xmm0111150201_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jun  6 22:50:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111150201_pi300-10000_cl_pass0_src2.csv
[Wed Jun  6 22:50:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111150201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111150201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  6 22:50:49 2012] fullrun_mos2_xmm0111150201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jun  6 22:50:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111150201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Jun  6 22:50:49 2012] fullrun_mos2_xmm0111150201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jun  6 22:50:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111150201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Jun  6 22:50:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111150201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111150201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  6 22:51:02 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 12.610763 pixels away
[Wed Jun  6 22:51:02 2012] Vigneting correction estimate = 1.000000
[Wed Jun  6 22:51:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  6 22:51:02 2012] Assessing source extent using major
[Wed Jun  6 22:51:02 2012] Source does appear to be extended
[Wed Jun  6 22:51:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 23:58:52 2012] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Wed Jun  6 23:58:52 2012] Initial guess for spatial extent in simple fitting = 9.52"
[Wed Jun  6 23:58:52 2012] source mask rpix=2.2, npix_max = 28, mask sum = 26, frac = 0.900
[Wed Jun  6 23:58:52 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.52"
[Thu Jun  7 00:27:31 2012] fullrun_mos2_xmm0111150201_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jun  7 00:27:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111150201_pi300-10000_cl_pass1_src2.csv
[Thu Jun  7 00:27:31 2012] fullrun_mos2_xmm0111150201_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jun  7 00:27:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111150201_pi300-10000_cl_pass1_src2.csv
[Thu Jun  7 00:27:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111150201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111150201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 00:27:32 2012] fullrun_mos2_xmm0111150201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jun  7 00:27:32 2012] fullrun_mos2_xmm0111150201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jun  7 00:27:32 2012] Fit fullrun_mos2_xmm0111150201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Jun  7 00:27:37 2012] Spatial fit model total counts = 501.081000, observed total counts = 479.000000
[Thu Jun  7 00:27:37 2012] Offset between fit and detection position for source 6 = 0.401099 pixels
[Thu Jun  7 00:27:37 2012] 501.101000 total counts/ 304.299000 bgd. counts: snr = 11.281822
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.401099 pixels
  Position = (213.7, 308.9) = 9 26 23.03 -47 55 50.0
  Extent = 4.6 (4.6-4.6)", rotation angle = 0
  Source counts = 196.8 +/- 22.4
  Background counts = 304.3
  Rate = 0.003 +/- 0.0004
[Thu Jun  7 00:27:37 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 00:27:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 00:27:37 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 00:27:37 2012] Source does appear to be extended
[Thu Jun  7 00:27:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 02:01:41 2012] XMMSAS src. selection expression = ellipse(18542.688800, 26824.124100, 278.248836, 278.248836, 0.000000, X, Y)
[Thu Jun  7 02:01:41 2012] Writing source region out to fullrun_mos2_xmm0111150201_pi300-10000_pass1_cl_src6_src.reg
[Thu Jun  7 02:01:41 2012] Extracting stamp from image fullrun_mos2_xmm0111150201_pi300-10000_cl_sm2.00.img.gz, (198, 293) - (230, 325)
[Thu Jun  7 02:01:41 2012] XMMSAS bgd. selection expression = annulus(18542.688800, 26824.124100, 463.748060, 927.496120, X, Y)
[Thu Jun  7 02:01:41 2012] Writing fullrun_mos2_xmm0111150201_pi300-10000_pass1_cl_src6.gif
[Thu Jun  7 02:04:59 2012] Mean detx,y = (-3838.01, -7088.27) 
[Thu Jun  7 02:05:00 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  7 02:05:08 2012] Binned source spectrum to 10 counts/bin
[Thu Jun  7 02:05:08 2012] Setting source spectrum file to fullrun_mos2_xmm0111150201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jun  7 02:05:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111150201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Jun  7 02:19:17 2012] Updating aperture counts using extracted products
[Thu Jun  7 02:19:17 2012] Error reading totcts from fullrun_mos2_xmm0111150201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jun  7 02:19:17 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun  7 02:19:17 2012] Using photon index=1.80, rate=0.00335, arf fullrun_mos2_xmm0111150201_pi300-10000_pass1_cl_src6.arf
[Thu Jun  7 02:19:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  7 02:19:17 2012] Updating source flux to 6.1e-14