[Wed Jun  6 20:39:52 2012] Detection parameters:
  Position = (165.1, 363.1) = 9 26 43.97 -47 51 51.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 314.3 +/- 21.7
  Background counts = 13.3
  Rate = 0.005 +/- 0.0004

[Wed Jun  6 20:39:52 2012] Off-axis axis estimate = 10.74'
[Wed Jun  6 22:17:55 2012] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Wed Jun  6 22:17:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun  6 22:17:55 2012] Initial guess for spatial extent in simple fitting = 11.80"
[Wed Jun  6 22:17:55 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.872
[Wed Jun  6 22:17:55 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.80"
[Wed Jun  6 22:50:48 2012] fullrun_mos2_xmm0111150201_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jun  6 22:50:48 2012] fullrun_mos2_xmm0111150201_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jun  6 22:50:48 2012] Fit fullrun_mos2_xmm0111150201_pi300-10000_cl_pass0_src4 appears to have run properly
[Wed Jun  6 22:50:49 2012] fullrun_mos2_xmm0111150201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jun  6 22:50:49 2012] fullrun_mos2_xmm0111150201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jun  6 22:50:49 2012] Fit fullrun_mos2_xmm0111150201_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Jun  6 22:51:02 2012] Spatial fit model total counts = 434.193000, observed total counts = 433.000000
[Wed Jun  6 22:51:02 2012] Offset between fit and detection position for source 5 = 0.087365 pixels
[Wed Jun  6 22:51:02 2012] 439.152000 total counts/ 218.995000 bgd. counts: snr = 14.877001
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.087365 pixels
  Position = (165.0, 363.1) = 9 26 44.01 -47 51 53.6
  Extent = 6.2 (5.5-6.9)", rotation angle = 0
  Source counts = 220.2 +/- 21.0
  Background counts = 219.0
  Rate = 0.004 +/- 0.0004
[Wed Jun  6 22:51:02 2012] Vigneting correction estimate = 1.000000
[Wed Jun  6 22:51:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  6 22:51:02 2012] Assessing source extent using major axis lower bound
[Wed Jun  6 22:51:02 2012] Source does appear to be extended
[Wed Jun  6 22:51:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 23:58:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun  6 23:58:52 2012] Initial guess for spatial extent in simple fitting = 6.21"
[Wed Jun  6 23:58:52 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.076
[Wed Jun  6 23:58:52 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 6.21"
[Thu Jun  7 00:27:31 2012] fullrun_mos2_xmm0111150201_pi300-10000_cl_pass1_src4.ximg exists
[Thu Jun  7 00:27:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111150201_pi300-10000_cl_pass1_src4.csv
[Thu Jun  7 00:27:31 2012] fullrun_mos2_xmm0111150201_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Jun  7 00:27:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111150201_pi300-10000_cl_pass1_src4.csv
[Thu Jun  7 00:27:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111150201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111150201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 00:27:32 2012] fullrun_mos2_xmm0111150201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Jun  7 00:27:32 2012] fullrun_mos2_xmm0111150201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Jun  7 00:27:32 2012] Fit fullrun_mos2_xmm0111150201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Jun  7 00:27:37 2012] Spatial fit model total counts = 423.816000, observed total counts = 424.000000
[Thu Jun  7 00:27:37 2012] Offset between fit and detection position for source 5 = 0.026587 pixels
[Thu Jun  7 00:27:37 2012] 426.217000 total counts/ 211.042000 bgd. counts: snr = 14.811784
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.026587 pixels
  Position = (165.1, 363.1) = 9 26 44.00 -47 51 53.5
  Extent = 6.1 (5.4-7.0)", rotation angle = 0
  Source counts = 215.2 +/- 20.6
  Background counts = 211.0
  Rate = 0.004 +/- 0.0004
[Thu Jun  7 00:27:37 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 00:27:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 00:27:37 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 00:27:37 2012] Source does appear to be extended
[Thu Jun  7 00:27:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 02:01:41 2012] XMMSAS src. selection expression = ellipse(14311.885980, 31542.677800, 366.896411, 366.896411, 0.000000, X, Y)
[Thu Jun  7 02:01:41 2012] Writing source region out to fullrun_mos2_xmm0111150201_pi300-10000_pass1_cl_src5_src.reg
[Thu Jun  7 02:01:41 2012] Extracting stamp from image fullrun_mos2_xmm0111150201_pi300-10000_cl_sm2.00.img.gz, (144, 342) - (186, 384)
[Thu Jun  7 02:01:41 2012] XMMSAS bgd. selection expression = annulus(14311.885980, 31542.677800, 611.494018, 1222.988035, X, Y)
[Thu Jun  7 02:01:41 2012] Writing fullrun_mos2_xmm0111150201_pi300-10000_pass1_cl_src5.gif
[Thu Jun  7 02:05:37 2012] Mean detx,y = (-3967.87, -13444.08) 
[Thu Jun  7 02:05:38 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  7 02:05:45 2012] Binned source spectrum to 10 counts/bin
[Thu Jun  7 02:05:45 2012] Setting source spectrum file to fullrun_mos2_xmm0111150201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jun  7 02:05:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111150201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Jun  7 02:19:17 2012] Updating aperture counts using extracted products
[Thu Jun  7 02:19:17 2012] Error reading totcts from fullrun_mos2_xmm0111150201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jun  7 02:19:17 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun  7 02:19:17 2012] Using photon index=1.80, rate=0.00366, arf fullrun_mos2_xmm0111150201_pi300-10000_pass1_cl_src5.arf
[Thu Jun  7 02:19:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  7 02:19:17 2012] Updating source flux to 9.3e-14