[Wed Jun  6 20:39:38 2012] Detection parameters:
  Position = (341.9, 418.1) = 9 25 27.58 -47 47 53.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 389.9 +/- 24.1
  Background counts = 12.5
  Rate = 0.007 +/- 0.0004

[Wed Jun  6 20:39:39 2012] Off-axis axis estimate = 9.23'
[Wed Jun  6 21:46:14 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Wed Jun  6 21:46:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun  6 21:46:14 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Wed Jun  6 21:46:14 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.974
[Wed Jun  6 21:46:14 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.04"
[Wed Jun  6 22:17:54 2012] fullrun_mos1_xmm0111150201_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jun  6 22:17:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111150201_pi300-10000_cl_pass0_src3.csv
[Wed Jun  6 22:17:54 2012] fullrun_mos1_xmm0111150201_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jun  6 22:17:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111150201_pi300-10000_cl_pass0_src3.csv
[Wed Jun  6 22:17:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111150201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111150201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  6 22:17:55 2012] fullrun_mos1_xmm0111150201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jun  6 22:17:55 2012] fullrun_mos1_xmm0111150201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jun  6 22:17:55 2012] Fit fullrun_mos1_xmm0111150201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jun  6 22:50:59 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 13.702325 pixels away
[Wed Jun  6 22:50:59 2012] Vigneting correction estimate = 1.000000
[Wed Jun  6 22:50:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  6 22:50:59 2012] Assessing source extent using major
[Wed Jun  6 22:50:59 2012] Source does appear to be extended
[Wed Jun  6 22:50:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  6 23:34:36 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Wed Jun  6 23:34:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun  6 23:34:36 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Wed Jun  6 23:34:36 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.974
[Wed Jun  6 23:34:36 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.04"
[Wed Jun  6 23:58:51 2012] fullrun_mos1_xmm0111150201_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jun  6 23:58:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111150201_pi300-10000_cl_pass1_src3.csv
[Wed Jun  6 23:58:51 2012] fullrun_mos1_xmm0111150201_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jun  6 23:58:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111150201_pi300-10000_cl_pass1_src3.csv
[Wed Jun  6 23:58:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111150201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111150201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  6 23:58:51 2012] fullrun_mos1_xmm0111150201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jun  6 23:58:51 2012] fullrun_mos1_xmm0111150201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jun  6 23:58:51 2012] Fit fullrun_mos1_xmm0111150201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jun  7 00:27:36 2012] Spatial fit model total counts = 471.757000, observed total counts = 467.000000
[Thu Jun  7 00:27:36 2012] Offset between fit and detection position for source 9 = 0.102376 pixels
[Thu Jun  7 00:27:36 2012] 468.601000 total counts/ 183.880000 bgd. counts: snr = 20.996758
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.102376 pixels
  Position = (341.9, 418.2) = 9 25 27.60 -47 47 54.7
  Extent = 6.6 (5.8-7.3)", rotation angle = 0
  Source counts = 284.7 +/- 21.6
  Background counts = 183.9
  Rate = 0.005 +/- 0.0004
[Thu Jun  7 00:27:36 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 00:27:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 00:27:36 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 00:27:36 2012] Source does appear to be extended
[Thu Jun  7 00:27:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 01:34:35 2012] XMMSAS src. selection expression = ellipse(29693.266460, 36336.084200, 393.065411, 393.065411, 0.000000, X, Y)
[Thu Jun  7 01:34:35 2012] Writing source region out to fullrun_mos1_xmm0111150201_pi300-10000_pass1_cl_src9_src.reg
[Thu Jun  7 01:34:35 2012] Extracting stamp from image fullrun_mos1_xmm0111150201_pi300-10000_cl_sm2.00.img.gz, (319, 396) - (364, 441)
[Thu Jun  7 01:34:35 2012] XMMSAS bgd. selection expression = annulus(29693.266460, 36336.084200, 655.109019, 1310.218038, X, Y)
[Thu Jun  7 01:34:35 2012] Writing fullrun_mos1_xmm0111150201_pi300-10000_pass1_cl_src9.gif
[Thu Jun  7 01:39:04 2012] Mean detx,y = (-6816.41, -11039.84) 
[Thu Jun  7 01:39:05 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  7 01:39:12 2012] Binned source spectrum to 10 counts/bin
[Thu Jun  7 01:39:13 2012] Setting source spectrum file to fullrun_mos1_xmm0111150201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jun  7 01:39:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111150201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Jun  7 02:19:16 2012] Updating aperture counts using extracted products
[Thu Jun  7 02:19:16 2012] Error reading totcts from fullrun_mos1_xmm0111150201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jun  7 02:19:17 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun  7 02:19:17 2012] Using photon index=1.80, rate=0.00484, arf fullrun_mos1_xmm0111150201_pi300-10000_pass1_cl_src9.arf
[Thu Jun  7 02:19:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  7 02:19:17 2012] Updating source flux to 1.3e-13