[Wed Jul 11 11:35:11 2012] Detection parameters:
  Position = (312.9, 268.4) = 9 25 39.64 -47 58 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 435.8 +/- 90.2
  Background counts = 145.0
  Rate = 0.008 +/- 0.002

[Wed Jul 11 11:35:12 2012] Off-axis axis estimate = 2.42'
[Wed Jul 11 11:40:28 2012] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 11:40:28 2012] Initial guess for spatial extent in simple fitting = 7.64"
[Wed Jul 11 11:40:28 2012] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.688
[Wed Jul 11 11:40:28 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.64"
[Wed Jul 11 13:33:57 2012] fullrun_pn_xmm0111150101_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jul 11 13:33:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111150101_pi300-10000_cl_pass0_src2.csv
[Wed Jul 11 13:33:57 2012] fullrun_pn_xmm0111150101_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jul 11 13:33:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111150101_pi300-10000_cl_pass0_src2.csv
[Wed Jul 11 13:33:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111150101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111150101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 13:33:58 2012] fullrun_pn_xmm0111150101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jul 11 13:33:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111150101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Jul 11 13:33:58 2012] fullrun_pn_xmm0111150101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jul 11 13:33:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111150101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Jul 11 13:33:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111150101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111150101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 14:32:04 2012] Source 2 is offset by 6.946444 and -5.358889 pixels which is larger than
2 X fitted extent = 3.690832 x 7.023403, not incorporating fit results
[Wed Jul 11 14:32:04 2012] Source 2 is offset by -2.785762 and -3.445493 pixels which is larger than
2 X fitted extent = 3.258198 x 3.258198, not incorporating fit results
[Wed Jul 11 14:32:04 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 14:32:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 14:32:04 2012] Assessing source extent using major
[Wed Jul 11 14:32:04 2012] Source does appear to be extended
[Wed Jul 11 14:32:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 14:32:04 2012] Source is confused with source 11
[Wed Jul 11 14:32:15 2012] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 14:32:15 2012] Initial guess for spatial extent in simple fitting = 7.64"
[Wed Jul 11 14:32:15 2012] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.688
[Wed Jul 11 14:32:15 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.64"
[Wed Jul 11 15:26:57 2012] fullrun_pn_xmm0111150101_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jul 11 15:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111150101_pi300-10000_cl_pass1_src2.csv
[Wed Jul 11 15:26:57 2012] fullrun_pn_xmm0111150101_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jul 11 15:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111150101_pi300-10000_cl_pass1_src2.csv
[Wed Jul 11 15:26:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111150101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111150101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 15:26:57 2012] fullrun_pn_xmm0111150101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jul 11 15:26:57 2012] fullrun_pn_xmm0111150101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jul 11 15:26:57 2012] Fit fullrun_pn_xmm0111150101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Jul 11 16:25:02 2012] Spatial fit model total counts = 6894.620000, observed total counts = 7083.000000
[Wed Jul 11 16:25:02 2012] Offset between fit and detection position for source 2 = 7.542248 pixels
[Wed Jul 11 16:25:02 2012] 5952.220000 total counts/ 3868.080000 bgd. counts: snr = 33.510366
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 7.542248 pixels
  Position = (316.9, 262.0) = 9 25 37.91 -47 59 13.7
  Extent = 15.3 (15.3-30.6)", rotation angle = 0
  Source counts = 2084.1 +/- 77.2
  Background counts = 3868.1
  Rate = 0.04 +/- 0.001
[Wed Jul 11 16:25:02 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 16:25:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 16:25:02 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 16:25:02 2012] Source does appear to be extended
[Wed Jul 11 16:25:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 16:25:09 2012] Counts = 2084.140000, rescaling region sizes by 2.000000
[Wed Jul 11 16:25:09 2012] XMMSAS src. selection expression = ellipse(27524.090000, 22744.824000, 1833.108053, 1833.108053, 0.000000, X, Y)
[Wed Jul 11 16:25:09 2012] Writing source region out to fullrun_pn_xmm0111150101_pi300-10000_pass1_cl_src2_src.reg
[Wed Jul 11 16:25:09 2012] Extracting stamp from image fullrun_pn_xmm0111150101_pi300-10000_cl_sm2.00.img.gz, (212, 157) - (422, 367)
[Wed Jul 11 16:25:09 2012] XMMSAS bgd. selection expression = annulus(27524.090000, 22744.824000, 6110.360176, 12220.720352, X, Y) && !ellipse(25901.712600, 23872.804400, 1571.258445, 1571.258445, 0.000000, X, Y) && !ellipse(18939.715200, 17599.955400, 424.132812, 360.944010, 47.628544, X, Y) && !ellipse(18538.069763, 26791.395599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18995.456220, 23755.053230, 431.842174, 383.383570, 96.773391, X, Y) && !ellipse(25110.520447, 19608.803253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25441.584015, 30229.833771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27965.375504, 30536.899600, 417.113612, 417.113612, 0.000000, X, Y) && !ellipse(18169.904816, 14035.444077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26841.527863, 22955.494232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26070.008209, 22250.902557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23844.347595, 16591.070404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26143.236572, 21804.647888, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 11 16:25:09 2012] Writing fullrun_pn_xmm0111150101_pi300-10000_pass1_cl_src2.gif
[Wed Jul 11 16:30:38 2012] Mean detx,y = (70.99, -692.16) 
[Wed Jul 11 16:30:52 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 16:34:45 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 16:34:46 2012] Setting source spectrum file to fullrun_pn_xmm0111150101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul 11 16:34:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111150101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jul 11 18:25:29 2012] Updating aperture counts using extracted products
[Wed Jul 11 18:25:29 2012] Error reading totcts from fullrun_pn_xmm0111150101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul 11 18:25:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 11 18:25:29 2012] Using photon index=1.80, rate=0.0371, arf fullrun_pn_xmm0111150101_pi300-10000_pass1_cl_src2.arf
[Wed Jul 11 18:25:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 11 18:25:29 2012] Updating source flux to 9.1e-14
[Wed Jul 11 18:29:09 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Wed Jul 11 18:29:09 2012] Flag c found in src. 2 procflags, skipping spectral fitting