[Wed Jul 11 11:35:57 2012] Detection parameters:
  Position = (298.1, 275.0) = 9 25 46.08 -47 58 17.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90677.1 +/- 356.3
  Background counts = 33.3
  Rate = 2 +/- 0.007

[Wed Jul 11 11:35:57 2012] Off-axis axis estimate = 1.70'
[Wed Jul 11 14:03:13 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 14:03:13 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Jul 11 14:03:13 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Wed Jul 11 14:03:13 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Wed Jul 11 14:31:57 2012] fullrun_mos2_xmm0111150101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 11 14:31:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111150101_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 14:31:57 2012] fullrun_mos2_xmm0111150101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 11 14:31:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111150101_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 14:31:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111150101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111150101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 14:31:58 2012] fullrun_mos2_xmm0111150101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 11 14:31:58 2012] fullrun_mos2_xmm0111150101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 11 14:31:58 2012] Fit fullrun_mos2_xmm0111150101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul 11 14:32:10 2012] Spatial fit model total counts = 81134.200000, observed total counts = 79588.000000
[Wed Jul 11 14:32:10 2012] Offset between fit and detection position for source 1 = 0.053665 pixels
[Wed Jul 11 14:32:10 2012] 81300.200000 total counts/ 17644.600000 bgd. counts: snr = 479.215335
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.053665 pixels
  Position = (298.1, 275.0) = 9 25 46.06 -47 58 17.1
  Extent = 5.3 (5.3-5.3)", rotation angle = 0
  Source counts = 63655.6 +/- 285.1
  Background counts = 17644.6
  Rate = 1 +/- 0.005
[Wed Jul 11 14:32:10 2012] Spatial fit model total counts = 50612.500000, observed total counts = 59488.000000
[Wed Jul 11 14:32:10 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 11 14:32:10 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 14:32:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 14:32:10 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 14:32:10 2012] Source does appear to be extended
[Wed Jul 11 14:32:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 16:02:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 16:02:38 2012] Initial guess for spatial extent in simple fitting = 5.29"
[Wed Jul 11 16:02:38 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.359
[Wed Jul 11 16:02:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.29"
[Wed Jul 11 16:24:58 2012] fullrun_mos2_xmm0111150101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 11 16:24:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111150101_pi300-10000_cl_pass1_src1.csv
[Wed Jul 11 16:24:58 2012] fullrun_mos2_xmm0111150101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 11 16:24:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111150101_pi300-10000_cl_pass1_src1.csv
[Wed Jul 11 16:24:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111150101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111150101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 16:24:58 2012] fullrun_mos2_xmm0111150101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 11 16:24:58 2012] fullrun_mos2_xmm0111150101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 11 16:24:58 2012] Fit fullrun_mos2_xmm0111150101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 11 16:25:04 2012] Spatial fit model total counts = 81201.100000, observed total counts = 79588.000000
[Wed Jul 11 16:25:04 2012] Offset between fit and detection position for source 1 = 0.000094 pixels
[Wed Jul 11 16:25:04 2012] 81367.400000 total counts/ 17669.700000 bgd. counts: snr = 479.191563
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000094 pixels
  Position = (298.1, 275.0) = 9 25 46.06 -47 58 17.1
  Extent = 5.3 (5.3-5.3)", rotation angle = 0
  Source counts = 63697.7 +/- 285.2
  Background counts = 17669.7
  Rate = 1 +/- 0.005
[Wed Jul 11 16:25:04 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 16:25:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 16:25:04 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 16:25:04 2012] Source does appear to be extended
[Wed Jul 11 16:25:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 18:18:25 2012] Counts = 63697.700000, rescaling region sizes by 3.000000
[Wed Jul 11 18:18:25 2012] XMMSAS src. selection expression = ellipse(25887.041840, 23876.514200, 951.028227, 951.028227, 0.000000, X, Y)
[Wed Jul 11 18:18:25 2012] Writing source region out to fullrun_mos2_xmm0111150101_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 11 18:18:25 2012] Extracting stamp from image fullrun_mos2_xmm0111150101_pi300-10000_cl_sm2.00.img.gz, (243, 220) - (353, 330)
[Wed Jul 11 18:18:25 2012] XMMSAS bgd. selection expression = annulus(25887.041840, 23876.514200, 4755.141137, 9510.282274, X, Y)
[Wed Jul 11 18:18:25 2012] Writing fullrun_mos2_xmm0111150101_pi300-10000_pass1_cl_src1.gif
[Wed Jul 11 18:18:35 2012] Mean detx,y = (-100.98, -59.10) 
[Wed Jul 11 18:18:37 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 18:20:45 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 18:20:45 2012] Setting source spectrum file to fullrun_mos2_xmm0111150101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 11 18:20:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111150101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul 11 18:25:30 2012] Updating aperture counts using extracted products
[Wed Jul 11 18:25:30 2012] Error reading totcts from fullrun_mos2_xmm0111150101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 11 18:25:30 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 11 18:25:30 2012] Using photon index=1.80, rate=1.09, arf fullrun_mos2_xmm0111150101_pi300-10000_pass1_cl_src1.arf
[Wed Jul 11 18:25:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 11 18:25:30 2012] Updating source flux to 1.1e-11
[Wed Jul 11 18:27:39 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Wed Jul 11 18:29:09 2012] Reading fit data from xmm0111150101/analysis//spectral/fullrun_mos2_xmm0111150101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul 11 18:29:09 2012] Spectral fit parameter nH value = 1.07042e+22
[Wed Jul 11 18:29:09 2012] Spectral fit parameter PhoIndex value = 9.99613
[Wed Jul 11 18:29:09 2012] Failed to get F(0.3-8.0) from xmm0111150101/analysis//spectral/fullrun_mos2_xmm0111150101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul 11 18:29:09 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 11 18:29:09 2012] Using Nh = 1.1e+22, photon index=10.00, rate=1.09, arf fullrun_mos2_xmm0111150101_pi300-10000_pass1_cl_src1.arf
[Wed Jul 11 18:29:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 11 18:29:09 2012] Updating source flux to 6.4e-12