[Thu May 24 10:20:21 2012] Detection parameters:
  Position = (309.2, 405.9) = 5 5 43.81 -67 52 29.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6118.1 +/- 88.6
  Background counts = 9.6
  Rate = 0.3 +/- 0.005

[Thu May 24 10:20:22 2012] Off-axis axis estimate = 7.83'
[Thu May 24 11:46:56 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Thu May 24 11:46:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 24 11:46:56 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Thu May 24 11:46:56 2012] source mask rpix=2.4, npix_max = 33, mask sum = 28, frac = 0.845
[Thu May 24 11:46:56 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.34"
[Thu May 24 12:59:27 2012] fullrun_mos1_xmm0111130701_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 24 12:59:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111130701_pi300-10000_cl_pass0_src2.csv
[Thu May 24 12:59:27 2012] fullrun_mos1_xmm0111130701_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 24 12:59:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111130701_pi300-10000_cl_pass0_src2.csv
[Thu May 24 12:59:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111130701_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111130701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 12:59:28 2012] fullrun_mos1_xmm0111130701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 24 12:59:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111130701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 24 12:59:28 2012] fullrun_mos1_xmm0111130701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 24 12:59:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111130701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 24 12:59:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111130701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111130701_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 14:28:16 2012] Warning, spatial fit 2 centroid is now closest to src. 1
[Thu May 24 14:28:16 2012] Vigneting correction estimate = 1.000000
[Thu May 24 14:28:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 14:28:16 2012] Assessing source extent using major
[Thu May 24 14:28:16 2012] Source does appear to be extended
[Thu May 24 14:28:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 14:28:16 2012] Source is confused with source 2
[Thu May 24 15:09:08 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Thu May 24 15:09:08 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Thu May 24 15:09:08 2012] source mask rpix=2.4, npix_max = 33, mask sum = 28, frac = 0.845
[Thu May 24 15:09:08 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.34"
[Thu May 24 15:40:53 2012] fullrun_mos1_xmm0111130701_pi300-10000_cl_pass1_src2.ximg exists
[Thu May 24 15:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111130701_pi300-10000_cl_pass1_src2.csv
[Thu May 24 15:40:53 2012] fullrun_mos1_xmm0111130701_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May 24 15:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111130701_pi300-10000_cl_pass1_src2.csv
[Thu May 24 15:40:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111130701_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111130701_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 15:40:53 2012] fullrun_mos1_xmm0111130701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May 24 15:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111130701_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May 24 15:40:53 2012] fullrun_mos1_xmm0111130701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 24 15:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111130701_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May 24 15:40:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111130701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111130701_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 16:16:23 2012] Spatial fit model total counts = 21164.500000, observed total counts = 15459.000000
[Thu May 24 16:16:23 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 24 16:16:23 2012] Spatial fit model total counts = 7498.500000, observed total counts = 12273.000000
[Thu May 24 16:16:23 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 24 16:16:23 2012] Vigneting correction estimate = 1.000000
[Thu May 24 16:16:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 16:16:23 2012] Assessing source extent using major
[Thu May 24 16:16:23 2012] Source does appear to be extended
[Thu May 24 16:16:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 19:18:44 2012] Counts = 6118.102539, rescaling region sizes by 2.000000
[Fri May 25 19:18:44 2012] XMMSAS src. selection expression = ellipse(26853.958710, 35263.827728, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May 25 19:18:44 2012] Writing source region out to fullrun_mos1_xmm0111130701_pi300-10000_pass1_cl_src4_src.reg
[Fri May 25 19:18:44 2012] Extracting stamp from image fullrun_mos1_xmm0111130701_pi300-10000_cl_sm2.00.img.gz, (234, 331) - (384, 481)
[Fri May 25 19:18:44 2012] XMMSAS bgd. selection expression = annulus(26853.958710, 35263.827728, 4350.000000, 8700.000000, X, Y) && !ellipse(25550.382400, 24127.145200, 4433.593928, 4433.593928, 0.000000, X, Y) && !ellipse(27525.229767, 35291.933868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26485.345062, 34902.393280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26104.783783, 37925.513184, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 25 19:18:44 2012] Writing fullrun_mos1_xmm0111130701_pi300-10000_pass1_cl_src4.gif
[Fri May 25 19:27:48 2012] Mean detx,y = (-9117.88, -6470.37) 
[Fri May 25 19:27:49 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 19:30:02 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 19:30:03 2012] Setting source spectrum file to fullrun_mos1_xmm0111130701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May 25 19:30:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111130701_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat May 26 01:26:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 26 01:26:00 2012] rmf not generated due to insufficient counts
[Sat May 26 01:56:28 2012] Updating aperture counts using extracted products
[Sat May 26 01:56:28 2012] Error reading totcts from fullrun_mos1_xmm0111130701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat May 26 01:56:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 01:56:28 2012] Using photon index=1.80, rate=0.318, arf fullrun_mos1_xmm0111130701_pi300-10000_pass1_cl_src4.arf
[Sat May 26 01:56:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 01:56:28 2012] Updating source flux to 6.9e-12
[Sat May 26 01:56:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting