[Sat Jun  9 14:32:17 2012] Detection parameters:
  Position = (229.2, 222.0) = 5 26 2.70 -66 5 11.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14218.3 +/- 144.6
  Background counts = 41.5
  Rate = 4 +/- 0.04

[Sat Jun  9 14:32:18 2012] Off-axis axis estimate = 7.48'
[Sat Jun  9 14:35:23 2012] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 14:35:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  9 14:35:23 2012] Initial guess for spatial extent in simple fitting = 10.17"
[Sat Jun  9 14:35:23 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.118
[Sat Jun  9 14:35:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.17"
[Sat Jun  9 16:08:11 2012] fullrun_pn_xmm0111130301_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun  9 16:08:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111130301_pi300-10000_cl_pass0_src1.csv
[Sat Jun  9 16:08:11 2012] fullrun_pn_xmm0111130301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun  9 16:08:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111130301_pi300-10000_cl_pass0_src1.csv
[Sat Jun  9 16:08:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111130301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111130301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 16:08:11 2012] fullrun_pn_xmm0111130301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun  9 16:08:11 2012] fullrun_pn_xmm0111130301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun  9 16:08:11 2012] Fit fullrun_pn_xmm0111130301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun  9 23:59:53 2012] Warning, spatial fit 1 centroid is now closest to src. 2
[Sat Jun  9 23:59:53 2012] Spatial fit model total counts = 2931.360000, observed total counts = 2922.000000
[Sat Jun  9 23:59:53 2012] Offset between fit and detection position for source 1 = 1.184249 pixels
[Sat Jun  9 23:59:53 2012] Warning, changing simple spatial fit ID from 1 to 11
[Sat Jun  9 23:59:53 2012] 2974.157000 total counts/ 873.587000 bgd. counts: snr = 71.069634
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.184249 pixels
  Position = (228.3, 222.8) = 5 26 3.35 -66 5 7.4
  Extent = 10.4 (10.0-10.8)", rotation angle = 0
  Source counts = 2100.6 +/- 54.5
  Background counts = 873.6
  Rate = 0.7 +/- 0.02
[Sat Jun  9 23:59:53 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 23:59:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 23:59:53 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 23:59:53 2012] Source does appear to be extended
[Sat Jun  9 23:59:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 23:59:53 2012] Source is confused with source 2
[Sun Jun 10 00:00:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 10 00:00:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 10 00:00:10 2012] Initial guess for spatial extent in simple fitting = 10.42"
[Sun Jun 10 00:00:10 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.074
[Sun Jun 10 00:00:10 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.42"
[Sun Jun 10 01:10:32 2012] fullrun_pn_xmm0111130301_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 10 01:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111130301_pi300-10000_cl_pass1_src1.csv
[Sun Jun 10 01:10:32 2012] fullrun_pn_xmm0111130301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 10 01:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111130301_pi300-10000_cl_pass1_src1.csv
[Sun Jun 10 01:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111130301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111130301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 01:10:32 2012] fullrun_pn_xmm0111130301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 10 01:10:32 2012] fullrun_pn_xmm0111130301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 10 01:10:32 2012] Fit fullrun_pn_xmm0111130301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun 10 03:42:48 2012] Warning, spatial fit 1 centroid is now closest to src. 9
[Sun Jun 10 03:42:48 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 03:42:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 03:42:48 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 03:42:48 2012] Source does appear to be extended
[Sun Jun 10 03:42:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 03:43:04 2012] Counts = 2100.570000, rescaling region sizes by 2.000000
[Sun Jun 10 03:43:04 2012] XMMSAS src. selection expression = ellipse(19811.544000, 19331.018000, 1250.232036, 1250.232036, 0.000000, X, Y)
[Sun Jun 10 03:43:04 2012] Writing source region out to fullrun_pn_xmm0111130301_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 10 03:43:04 2012] Extracting stamp from image fullrun_pn_xmm0111130301_pi300-10000_cl_sm2.00.img.gz, (156, 151) - (300, 295)
[Sun Jun 10 03:43:04 2012] XMMSAS bgd. selection expression = annulus(19811.544000, 19331.018000, 4167.440120, 8334.880240, X, Y) && !ellipse(20042.885200, 19372.922000, 4559.592131, 4559.592131, 0.000000, X, Y) && !ellipse(24919.519000, 25170.654800, 1203.680035, 1203.680035, 0.000000, X, Y) && !ellipse(23726.616800, 26035.716400, 1644.064047, 1644.064047, 0.000000, X, Y) && !ellipse(23615.129942, 27194.916400, 508.518415, 508.518415, 0.000000, X, Y) && !ellipse(24350.924000, 26100.328600, 1107.160032, 1107.160032, 0.000000, X, Y) && !ellipse(25460.451260, 26439.934200, 898.472026, 898.472026, 0.000000, X, Y) && !ellipse(24548.797060, 27513.762400, 1271.216037, 647.550419, 0.000000, X, Y)
[Sun Jun 10 03:43:04 2012] Writing fullrun_pn_xmm0111130301_pi300-10000_pass1_cl_src1.gif
[Sun Jun 10 03:43:17 2012] Mean detx,y = (-4616.08, -6479.15) 
[Sun Jun 10 03:43:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 03:46:46 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 03:46:47 2012] Setting source spectrum file to fullrun_pn_xmm0111130301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 10 03:46:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111130301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 10 16:24:25 2012] Updating aperture counts using extracted products
[Sun Jun 10 16:24:25 2012] Error reading totcts from fullrun_pn_xmm0111130301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 10 16:24:25 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 16:24:25 2012] Using photon index=1.80, rate=0.65, arf fullrun_pn_xmm0111130301_pi300-10000_pass1_cl_src1.arf
[Sun Jun 10 16:24:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 16:24:25 2012] Updating source flux to 2.5e-12
[Sun Jun 10 16:29:49 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Jun 10 16:34:00 2012] Reading fit data from xmm0111130301/analysis//spectral/fullrun_pn_xmm0111130301_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jun 10 16:34:00 2012] Spectral fit parameter nH value = 9.75795e+21
[Sun Jun 10 16:34:00 2012] Spectral fit parameter PhoIndex value = 8.32962
[Sun Jun 10 16:34:00 2012] Failed to get F(0.3-8.0) from xmm0111130301/analysis//spectral/fullrun_pn_xmm0111130301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jun 10 16:34:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 16:34:00 2012] Using Nh = 9.8e+21, photon index=8.33, rate=0.65, arf fullrun_pn_xmm0111130301_pi300-10000_pass1_cl_src1.arf
[Sun Jun 10 16:34:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 16:34:00 2012] Updating source flux to 1.4e-12