[Sat Jun  9 14:33:24 2012] Detection parameters:
  Position = (234.2, 222.2) = 5 25 59.13 -66 5 9.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4696.6 +/- 83.7
  Background counts = 17.9
  Rate = 0.7 +/- 0.01

[Sat Jun  9 14:33:24 2012] Off-axis axis estimate = 7.23'
[Sat Jun  9 22:54:01 2012] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 22:54:01 2012] Initial guess for spatial extent in simple fitting = 10.04"
[Sat Jun  9 22:54:01 2012] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.919
[Sat Jun  9 22:54:01 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.04"
[Sat Jun  9 23:59:44 2012] fullrun_mos2_xmm0111130301_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun  9 23:59:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111130301_pi300-10000_cl_pass0_src3.csv
[Sat Jun  9 23:59:44 2012] fullrun_mos2_xmm0111130301_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun  9 23:59:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111130301_pi300-10000_cl_pass0_src3.csv
[Sat Jun  9 23:59:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111130301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111130301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 23:59:44 2012] fullrun_mos2_xmm0111130301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun  9 23:59:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111130301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jun  9 23:59:44 2012] fullrun_mos2_xmm0111130301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun  9 23:59:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111130301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jun  9 23:59:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111130301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111130301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 00:00:00 2012] Warning, spatial fit 3 centroid is now closest to src. 10
[Sun Jun 10 00:00:00 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 00:00:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 00:00:00 2012] Assessing source extent using major
[Sun Jun 10 00:00:00 2012] Source does appear to be extended
[Sun Jun 10 00:00:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 00:00:01 2012] Source is confused with source 12
[Sun Jun 10 02:50:32 2012] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 02:50:32 2012] Initial guess for spatial extent in simple fitting = 10.04"
[Sun Jun 10 02:50:32 2012] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.919
[Sun Jun 10 02:50:32 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.04"
[Sun Jun 10 03:42:42 2012] fullrun_mos2_xmm0111130301_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun 10 03:42:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111130301_pi300-10000_cl_pass1_src3.csv
[Sun Jun 10 03:42:42 2012] fullrun_mos2_xmm0111130301_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun 10 03:42:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111130301_pi300-10000_cl_pass1_src3.csv
[Sun Jun 10 03:42:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111130301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111130301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 03:42:42 2012] fullrun_mos2_xmm0111130301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun 10 03:42:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111130301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun 10 03:42:42 2012] fullrun_mos2_xmm0111130301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun 10 03:42:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111130301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun 10 03:42:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111130301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111130301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 03:42:56 2012] Source 11 is offset by -5.959068 and 1.298393 pixels which is larger than
2 X fitted extent = 9.131127 x 1.141393, not incorporating fit results
[Sun Jun 10 03:42:56 2012] Warning, spatial fit 3 centroid is now closest to src. 10
[Sun Jun 10 03:42:56 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 03:42:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 03:42:56 2012] Assessing source extent using major
[Sun Jun 10 03:42:56 2012] Source does appear to be extended
[Sun Jun 10 03:42:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 15:05:01 2012] Counts = 4696.597656, rescaling region sizes by 2.000000
[Sun Jun 10 15:05:01 2012] XMMSAS src. selection expression = ellipse(20324.469055, 19280.052216, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 10 15:05:01 2012] Writing source region out to fullrun_mos2_xmm0111130301_pi300-10000_pass1_cl_src11_src.reg
[Sun Jun 10 15:05:01 2012] Extracting stamp from image fullrun_mos2_xmm0111130301_pi300-10000_cl_sm2.00.img.gz, (159, 147) - (309, 297)
[Sun Jun 10 15:05:01 2012] XMMSAS bgd. selection expression = annulus(20324.469055, 19280.052216, 4350.000000, 8700.000000, X, Y) && !ellipse(19740.966629, 19241.546326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20064.140778, 19883.612061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24849.046000, 25243.038000, 580.724817, 580.724817, 0.000000, X, Y) && !ellipse(23690.061880, 26029.946400, 1265.872036, 1265.872036, 0.000000, X, Y) && !ellipse(24299.565800, 26103.071400, 1140.384033, 1140.384033, 0.000000, X, Y) && !ellipse(25450.912400, 26494.540800, 815.856023, 815.856023, 0.000000, X, Y) && !ellipse(24420.093353, 27552.000427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23652.842987, 27218.366791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24896.631287, 27770.936798, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 10 15:05:01 2012] Writing fullrun_mos2_xmm0111130301_pi300-10000_pass1_cl_src11.gif
[Sun Jun 10 15:10:53 2012] Mean detx,y = (4835.55, 6184.11) 
[Sun Jun 10 15:10:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 15:13:18 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 15:13:19 2012] Setting source spectrum file to fullrun_mos2_xmm0111130301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jun 10 15:13:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111130301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Jun 10 15:27:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 10 15:27:59 2012] rmf not generated due to insufficient counts
[Sun Jun 10 16:24:26 2012] Updating aperture counts using extracted products
[Sun Jun 10 16:24:26 2012] Error reading totcts from fullrun_mos2_xmm0111130301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jun 10 16:24:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 16:24:27 2012] Using photon index=1.80, rate=0.688, arf fullrun_mos2_xmm0111130301_pi300-10000_pass1_cl_src11.arf
[Sun Jun 10 16:24:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 16:24:27 2012] Updating source flux to 1.1e-11
[Sun Jun 10 16:27:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 10 16:29:49 2012] xmm0111130301/analysis//spectral/fullrun_mos2_xmm0111130301_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete