[Thu Jul 12 09:31:32 2012] Detection parameters:
  Position = (250.7, 328.7) = 16 27 38.25 -24 36 58.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2212.5 +/- 57.7
  Background counts = 48.4
  Rate = 0.1 +/- 0.003

[Thu Jul 12 09:31:33 2012] Off-axis axis estimate = 4.10'
[Thu Jul 12 09:33:51 2012] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 09:33:51 2012] Initial guess for spatial extent in simple fitting = 8.48"
[Thu Jul 12 09:33:51 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.042
[Thu Jul 12 09:33:51 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.48"
[Thu Jul 12 10:34:59 2012] fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_src7.ximg exists
[Thu Jul 12 10:34:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_src7.csv
[Thu Jul 12 10:34:59 2012] fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Jul 12 10:34:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_src7.csv
[Thu Jul 12 10:34:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 10:34:59 2012] fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Jul 12 10:34:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu Jul 12 10:34:59 2012] fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Jul 12 10:34:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu Jul 12 10:34:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 13:18:28 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 11.718601 pixels away
[Thu Jul 12 13:18:28 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 13:18:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 13:18:28 2012] Assessing source extent using major
[Thu Jul 12 13:18:28 2012] Source does appear to be extended
[Thu Jul 12 13:18:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 13:18:59 2012] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 13:18:59 2012] Initial guess for spatial extent in simple fitting = 8.48"
[Thu Jul 12 13:18:59 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.042
[Thu Jul 12 13:18:59 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.48"
[Thu Jul 12 14:33:04 2012] fullrun_pn_xmm0111120201_pi300-10000_cl_pass1_src7.ximg exists
[Thu Jul 12 14:33:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111120201_pi300-10000_cl_pass1_src7.csv
[Thu Jul 12 14:33:04 2012] fullrun_pn_xmm0111120201_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Jul 12 14:33:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111120201_pi300-10000_cl_pass1_src7.csv
[Thu Jul 12 14:33:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111120201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111120201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 14:33:05 2012] fullrun_pn_xmm0111120201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Jul 12 14:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111120201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu Jul 12 14:33:05 2012] fullrun_pn_xmm0111120201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Jul 12 14:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111120201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu Jul 12 14:33:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111120201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111120201_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 16:42:09 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 11.718601 pixels away
[Thu Jul 12 16:42:09 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 16:42:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 16:42:09 2012] Assessing source extent using major
[Thu Jul 12 16:42:09 2012] Source does appear to be extended
[Thu Jul 12 16:42:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 16:42:39 2012] Counts = 2212.475830, rescaling region sizes by 2.000000
[Thu Jul 12 16:42:39 2012] XMMSAS src. selection expression = ellipse(21763.263947, 28551.422485, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jul 12 16:42:39 2012] Writing source region out to fullrun_pn_xmm0111120201_pi300-10000_pass1_cl_src8_src.reg
[Thu Jul 12 16:42:39 2012] Extracting stamp from image fullrun_pn_xmm0111120201_pi300-10000_cl_sm2.00.img.gz, (176, 254) - (326, 404)
[Thu Jul 12 16:42:39 2012] XMMSAS bgd. selection expression = annulus(21763.263947, 28551.422485, 4350.000000, 8700.000000, X, Y) && !ellipse(26883.124207, 22914.322693, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23170.822600, 23404.871200, 454.878413, 454.878413, 0.000000, X, Y) && !ellipse(18003.426514, 23887.648468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27760.778656, 35439.226929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24763.486877, 35372.614899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14575.754486, 30997.814270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29636.232480, 28131.730780, 452.558413, 452.558413, 0.000000, X, Y) && !ellipse(30348.016400, 27011.184800, 435.327213, 435.327213, 0.000000, X, Y) && !ellipse(21629.881912, 26555.615723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27883.279880, 26439.612400, 479.020014, 479.020014, 0.000000, X, Y) && !ellipse(24560.557600, 25436.617200, 444.560013, 444.560013, 0.000000, X, Y) && !ellipse(16405.566162, 24910.623291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24863.816600, 23881.236800, 487.925614, 487.925614, 0.000000, X, Y) && !ellipse(21356.530800, 21001.310000, 452.967213, 452.967213, 0.000000, X, Y) && !ellipse(26258.479800, 20603.317800, 347.417610, 347.417610, 0.000000, X, Y) && !ellipse(25462.619812, 37480.944458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26278.024445, 37080.964294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20348.948425, 35173.870026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18393.922913, 34735.585754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24864.914307, 34143.129242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23266.434918, 32821.779780, 332.520010, 332.520010, 0.000000, X, Y) && !ellipse(23729.823000, 32058.470600, 425.080812, 425.080812, 0.000000, X, Y) && !ellipse(14582.608444, 28290.162292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29030.503937, 26656.607727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22576.696100, 26661.965400, 356.602410, 356.602410, 0.000000, X, Y) && !ellipse(21757.513153, 26040.643585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21121.838074, 25690.615143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17006.162994, 23344.856934, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 12 16:42:39 2012] Writing fullrun_pn_xmm0111120201_pi300-10000_pass1_cl_src8.gif
[Thu Jul 12 17:07:12 2012] Mean detx,y = (2471.97, 4800.56) 
[Thu Jul 12 17:07:16 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 17:09:54 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 17:09:54 2012] Setting source spectrum file to fullrun_pn_xmm0111120201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Jul 12 17:09:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111120201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu Jul 12 17:45:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 12 17:45:36 2012] rmf not generated due to insufficient counts
[Thu Jul 12 21:08:11 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:08:11 2012] Error reading totcts from fullrun_pn_xmm0111120201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Jul 12 21:08:12 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:08:12 2012] Using photon index=1.80, rate=0.0966, arf fullrun_pn_xmm0111120201_pi300-10000_pass1_cl_src8.arf
[Thu Jul 12 21:08:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:08:12 2012] Updating source flux to 2.8e-13
[Thu Jul 12 21:14:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting