[Thu Jul 12 09:31:32 2012] Detection parameters:
  Position = (485.1, 245.1) = 16 26 23.44 -24 43 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3793.4 +/- 85.6
  Background counts = 41.0
  Rate = 0.1 +/- 0.003

[Thu Jul 12 09:31:33 2012] Off-axis axis estimate = 14.07'
[Thu Jul 12 09:33:51 2012] Using EEF radius (= 13.47 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 09:33:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 12 09:33:51 2012] Initial guess for spatial extent in simple fitting = 13.47"
[Thu Jul 12 09:33:51 2012] source mask rpix=3.1, npix_max = 51, mask sum = 52, frac = 1.006
[Thu Jul 12 09:33:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.47"
[Thu Jul 12 10:34:59 2012] fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul 12 10:34:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_src1.csv
[Thu Jul 12 10:34:59 2012] fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul 12 10:34:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_src1.csv
[Thu Jul 12 10:34:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 10:34:59 2012] fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul 12 10:34:59 2012] fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul 12 10:34:59 2012] Fit fullrun_pn_xmm0111120201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jul 12 13:18:28 2012] Spatial fit model total counts = 6330.170000, observed total counts = 5736.000000
[Thu Jul 12 13:18:28 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 12 13:18:28 2012] Spatial fit model total counts = 5268.800000, observed total counts = 4961.000000
[Thu Jul 12 13:18:28 2012] Offset between fit and detection position for source 1 = 2.734102 pixels
[Thu Jul 12 13:18:28 2012] Warning, changing simple spatial fit ID from 1 to 2
[Thu Jul 12 13:18:28 2012] 4636.961000 total counts/ 430.101000 bgd. counts: snr = 202.848982
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.734102 pixels
  Position = (484.5, 242.4) = 16 26 23.63 -24 43 13.1
  Extent = 11.4 (11.1-11.8)", rotation angle = 0
  Source counts = 4206.9 +/- 68.1
  Background counts = 430.1
  Rate = 0.1 +/- 0.002
[Thu Jul 12 13:18:28 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 13:18:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 13:18:28 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 13:18:28 2012] Source does appear to be extended
[Thu Jul 12 13:18:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 13:18:28 2012] Source is confused with source 2
[Thu Jul 12 13:18:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 12 13:18:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 12 13:18:59 2012] Initial guess for spatial extent in simple fitting = 11.42"
[Thu Jul 12 13:18:59 2012] source mask rpix=2.6, npix_max = 39, mask sum = 43, frac = 1.101
[Thu Jul 12 13:18:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.42"
[Thu Jul 12 14:33:04 2012] fullrun_pn_xmm0111120201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul 12 14:33:04 2012] fullrun_pn_xmm0111120201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul 12 14:33:04 2012] Fit fullrun_pn_xmm0111120201_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Jul 12 14:33:05 2012] fullrun_pn_xmm0111120201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul 12 14:33:05 2012] fullrun_pn_xmm0111120201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul 12 14:33:05 2012] Fit fullrun_pn_xmm0111120201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul 12 16:42:09 2012] Warning, spatial fit 1 centroid is now closest to src. 2
[Thu Jul 12 16:42:09 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 16:42:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 16:42:09 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 16:42:09 2012] Source does appear to be extended
[Thu Jul 12 16:42:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 16:42:39 2012] Counts = 4206.860000, rescaling region sizes by 2.000000
[Thu Jul 12 16:42:39 2012] XMMSAS src. selection expression = ellipse(42102.831200, 21043.666000, 1369.824039, 1369.824039, 0.000000, X, Y)
[Thu Jul 12 16:42:39 2012] Writing source region out to fullrun_pn_xmm0111120201_pi300-10000_pass1_cl_src1_src.reg
[Thu Jul 12 16:42:39 2012] Extracting stamp from image fullrun_pn_xmm0111120201_pi300-10000_cl_sm2.00.img.gz, (406, 164) - (563, 321)
[Thu Jul 12 16:42:39 2012] XMMSAS bgd. selection expression = annulus(42102.831200, 21043.666000, 4566.080131, 9132.160263, X, Y) && !ellipse(42076.747070, 20737.509308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32611.474701, 18302.344315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41107.523315, 22648.878174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36512.012756, 21007.339935, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 12 16:42:39 2012] Writing fullrun_pn_xmm0111120201_pi300-10000_pass1_cl_src1.gif
[Thu Jul 12 16:42:57 2012] Mean detx,y = (-16054.02, -6310.20) 
[Thu Jul 12 16:43:01 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 16:45:25 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 16:45:25 2012] Setting source spectrum file to fullrun_pn_xmm0111120201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 12 16:45:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111120201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jul 12 21:08:11 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:08:11 2012] Error reading totcts from fullrun_pn_xmm0111120201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 12 21:08:12 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:08:12 2012] Using photon index=1.80, rate=0.145, arf fullrun_pn_xmm0111120201_pi300-10000_pass1_cl_src1.arf
[Thu Jul 12 21:08:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:08:12 2012] Updating source flux to 1.3e-12
[Thu Jul 12 21:14:45 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Thu Jul 12 21:14:45 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Jul 12 21:16:24 2012] Reading fit data from xmm0111120201/analysis//spectral/fullrun_pn_xmm0111120201_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jul 12 21:16:24 2012] Spectral fit parameter nH value = 1.41088e+22
[Thu Jul 12 21:16:24 2012] Spectral fit parameter PhoIndex value = 2.17254
[Thu Jul 12 21:16:24 2012] Failed to get F(0.3-8.0) from xmm0111120201/analysis//spectral/fullrun_pn_xmm0111120201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jul 12 21:16:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:24 2012] Using Nh = 1.4e+22, photon index=2.17, rate=0.145, arf fullrun_pn_xmm0111120201_pi300-10000_pass1_cl_src1.arf
[Thu Jul 12 21:16:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:24 2012] Updating source flux to 3.1e-12