[Thu Jul 12 09:32:13 2012] Detection parameters:
  Position = (248.7, 184.9) = 16 27 38.91 -24 47 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.1 +/- 12.7
  Background counts = 9.5
  Rate = 0.003 +/- 0.0004

[Thu Jul 12 09:32:13 2012] Off-axis axis estimate = 8.98'
[Thu Jul 12 12:00:37 2012] Using EEF radius (= 10.92 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 12:00:37 2012] Initial guess for spatial extent in simple fitting = 10.92"
[Thu Jul 12 12:00:37 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.993
[Thu Jul 12 12:00:37 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 10.92"
[Thu Jul 12 13:18:18 2012] fullrun_mos2_xmm0111120201_pi300-10000_cl_pass0_src36.ximg exists
[Thu Jul 12 13:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111120201_pi300-10000_cl_pass0_src36.csv
[Thu Jul 12 13:18:18 2012] fullrun_mos2_xmm0111120201_pi300-10000_cl_pass0_src36_1.ximg exists
[Thu Jul 12 13:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111120201_pi300-10000_cl_pass0_src36.csv
[Thu Jul 12 13:18:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111120201_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111120201_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 13:18:18 2012] fullrun_mos2_xmm0111120201_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Thu Jul 12 13:18:18 2012] fullrun_mos2_xmm0111120201_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Thu Jul 12 13:18:18 2012] Fit fullrun_mos2_xmm0111120201_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Thu Jul 12 13:18:45 2012] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 14.774515 pixels away
[Thu Jul 12 13:18:45 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 13:18:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 13:18:45 2012] Assessing source extent using major
[Thu Jul 12 13:18:45 2012] Source does appear to be extended
[Thu Jul 12 13:18:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 15:39:10 2012] Using EEF radius (= 10.92 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 15:39:10 2012] Initial guess for spatial extent in simple fitting = 10.92"
[Thu Jul 12 15:39:10 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.993
[Thu Jul 12 15:39:10 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 10.92"
[Thu Jul 12 16:41:58 2012] fullrun_mos2_xmm0111120201_pi300-10000_cl_pass1_src35.ximg exists
[Thu Jul 12 16:41:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111120201_pi300-10000_cl_pass1_src35.csv
[Thu Jul 12 16:41:58 2012] fullrun_mos2_xmm0111120201_pi300-10000_cl_pass1_src35_1.ximg exists
[Thu Jul 12 16:41:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111120201_pi300-10000_cl_pass1_src35.csv
[Thu Jul 12 16:41:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111120201_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111120201_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 16:41:59 2012] fullrun_mos2_xmm0111120201_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Thu Jul 12 16:41:59 2012] fullrun_mos2_xmm0111120201_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Thu Jul 12 16:41:59 2012] Fit fullrun_mos2_xmm0111120201_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Thu Jul 12 16:42:26 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 62.208387 pixels away
[Thu Jul 12 16:42:26 2012] Spatial fit model total counts = 181.301000, observed total counts = 172.000000
[Thu Jul 12 16:42:26 2012] Offset between fit and detection position for source 46 = 0.149676 pixels
[Thu Jul 12 16:42:26 2012] 183.456600 total counts/ 121.113000 bgd. counts: snr = 5.664955
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 0.149676 pixels
  Position = (248.8, 184.8) = 16 27 38.90 -24 47 24.5
  Extent = 5.5 (3.6-7.3)", rotation angle = 0
  Source counts = 62.3 +/- 13.5
  Background counts = 121.1
  Rate = 0.002 +/- 0.0004
[Thu Jul 12 16:42:26 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 16:42:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 16:42:26 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 16:42:26 2012] Source does appear to be extended
[Thu Jul 12 16:42:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 19:39:04 2012] XMMSAS src. selection expression = ellipse(21593.797000, 16029.194400, 329.202609, 329.202609, 0.000000, X, Y)
[Thu Jul 12 19:39:04 2012] Writing source region out to fullrun_mos2_xmm0111120201_pi300-10000_pass1_cl_src46_src.reg
[Thu Jul 12 19:39:04 2012] Extracting stamp from image fullrun_mos2_xmm0111120201_pi300-10000_cl_sm2.00.img.gz, (230, 166) - (268, 204)
[Thu Jul 12 19:39:04 2012] XMMSAS bgd. selection expression = annulus(21593.797000, 16029.194400, 548.671016, 1097.342032, X, Y)
[Thu Jul 12 19:39:04 2012] Writing fullrun_mos2_xmm0111120201_pi300-10000_pass1_cl_src46.gif
[Thu Jul 12 19:48:57 2012] Mean detx,y = (-4816.06, 7328.65) 
[Thu Jul 12 19:48:58 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 19:49:14 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 19:49:15 2012] Setting source spectrum file to fullrun_mos2_xmm0111120201_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Thu Jul 12 19:49:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111120201_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Thu Jul 12 21:06:37 2012] Not generating rmf since there are only 62 counts
[Thu Jul 12 21:06:37 2012] rmf not generated due to insufficient counts
[Thu Jul 12 21:08:17 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:08:17 2012] Error reading totcts from fullrun_mos2_xmm0111120201_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Thu Jul 12 21:08:18 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:08:18 2012] Using photon index=1.80, rate=0.0019, arf fullrun_mos2_xmm0111120201_pi300-10000_pass1_cl_src46.arf
[Thu Jul 12 21:08:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:08:18 2012] Updating source flux to 4.3e-14
[Thu Jul 12 21:11:38 2012] Source 46 has fewer than 100.000000 counts, skipping spectral fitting