[Thu Jul 12 09:32:12 2012] Detection parameters:
  Position = (108.3, 263.8) = 16 28 23.71 -24 41 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 148.1 +/- 15.6
  Background counts = 9.4
  Rate = 0.005 +/- 0.0005

[Thu Jul 12 09:32:13 2012] Off-axis axis estimate = 14.01'
[Thu Jul 12 12:00:37 2012] Using EEF radius (= 13.43 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 12:00:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 12 12:00:37 2012] Initial guess for spatial extent in simple fitting = 13.43"
[Thu Jul 12 12:00:37 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.951
[Thu Jul 12 12:00:37 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 13.43"
[Thu Jul 12 13:18:18 2012] fullrun_mos2_xmm0111120201_pi300-10000_cl_pass0_src25.ximg exists
[Thu Jul 12 13:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111120201_pi300-10000_cl_pass0_src25.csv
[Thu Jul 12 13:18:18 2012] fullrun_mos2_xmm0111120201_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Jul 12 13:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111120201_pi300-10000_cl_pass0_src25.csv
[Thu Jul 12 13:18:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111120201_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111120201_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 13:18:18 2012] fullrun_mos2_xmm0111120201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Jul 12 13:18:18 2012] fullrun_mos2_xmm0111120201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Jul 12 13:18:18 2012] Fit fullrun_mos2_xmm0111120201_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Thu Jul 12 13:18:45 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 17.853150 pixels away
[Thu Jul 12 13:18:45 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 13:18:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 13:18:45 2012] Assessing source extent using major
[Thu Jul 12 13:18:45 2012] Source does appear to be extended
[Thu Jul 12 13:18:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 15:39:10 2012] Using EEF radius (= 13.43 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 15:39:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 12 15:39:10 2012] Initial guess for spatial extent in simple fitting = 13.43"
[Thu Jul 12 15:39:10 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.951
[Thu Jul 12 15:39:10 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 13.43"
[Thu Jul 12 16:41:58 2012] fullrun_mos2_xmm0111120201_pi300-10000_cl_pass1_src25.ximg exists
[Thu Jul 12 16:41:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111120201_pi300-10000_cl_pass1_src25.csv
[Thu Jul 12 16:41:58 2012] fullrun_mos2_xmm0111120201_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu Jul 12 16:41:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111120201_pi300-10000_cl_pass1_src25.csv
[Thu Jul 12 16:41:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111120201_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111120201_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 16:41:59 2012] fullrun_mos2_xmm0111120201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu Jul 12 16:41:59 2012] fullrun_mos2_xmm0111120201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu Jul 12 16:41:59 2012] Fit fullrun_mos2_xmm0111120201_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Thu Jul 12 16:42:26 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 17.853150 pixels away
[Thu Jul 12 16:42:26 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 16:42:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 16:42:26 2012] Assessing source extent using major
[Thu Jul 12 16:42:26 2012] Source does appear to be extended
[Thu Jul 12 16:42:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 19:39:04 2012] XMMSAS src. selection expression = ellipse(9375.106331, 22901.310394, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 12 19:39:04 2012] Writing source region out to fullrun_mos2_xmm0111120201_pi300-10000_pass1_cl_src11_src.reg
[Thu Jul 12 19:39:04 2012] Extracting stamp from image fullrun_mos2_xmm0111120201_pi300-10000_cl_sm2.00.img.gz, (71, 226) - (146, 301)
[Thu Jul 12 19:39:04 2012] XMMSAS bgd. selection expression = annulus(9375.106331, 22901.310394, 1087.500000, 2175.000000, X, Y)
[Thu Jul 12 19:39:04 2012] Writing fullrun_mos2_xmm0111120201_pi300-10000_pass1_cl_src11.gif
[Thu Jul 12 19:45:56 2012] Mean detx,y = (-15601.92, -1560.42) 
[Thu Jul 12 19:45:57 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 19:46:14 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 19:46:15 2012] Setting source spectrum file to fullrun_mos2_xmm0111120201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jul 12 19:46:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111120201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Jul 12 21:05:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 12 21:05:34 2012] rmf not generated due to insufficient counts
[Thu Jul 12 21:08:17 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:08:17 2012] Error reading totcts from fullrun_mos2_xmm0111120201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jul 12 21:08:18 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:08:18 2012] Using photon index=1.80, rate=0.00452, arf fullrun_mos2_xmm0111120201_pi300-10000_pass1_cl_src11.arf
[Thu Jul 12 21:08:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:08:18 2012] Updating source flux to 1.1e-13
[Thu Jul 12 21:11:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting