[Fri Jul 13 01:55:48 2012] Detection parameters:
  Position = (322.5, 341.3) = 19 1 40.70 -36 52 34.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30599.8 +/- 207.6
  Background counts = 93.4
  Rate = 2 +/- 0.01

[Fri Jul 13 01:55:48 2012] Off-axis axis estimate = 3.56'
[Fri Jul 13 01:58:45 2012] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 01:58:45 2012] Initial guess for spatial extent in simple fitting = 8.21"
[Fri Jul 13 01:58:45 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.097
[Fri Jul 13 01:58:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.21"
[Fri Jul 13 02:47:01 2012] fullrun_pn_xmm0111120101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 13 02:47:01 2012] fullrun_pn_xmm0111120101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 13 02:47:01 2012] Fit fullrun_pn_xmm0111120101_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Jul 13 02:47:02 2012] fullrun_pn_xmm0111120101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 13 02:47:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111120101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jul 13 02:47:02 2012] fullrun_pn_xmm0111120101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 13 02:47:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111120101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jul 13 02:47:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111120101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111120101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 04:03:46 2012] Spatial fit model total counts = 21582.400000, observed total counts = 21804.000000
[Fri Jul 13 04:03:46 2012] Offset between fit and detection position for source 1 = 0.434845 pixels
[Fri Jul 13 04:03:46 2012] 22162.440000 total counts/ 2353.540000 bgd. counts: snr = 408.318980
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.434845 pixels
  Position = (322.0, 341.2) = 19 1 40.86 -36 52 35.2
  Extent = 7.4" x 6.5", rotation angle = 90
  Source counts = 19808.9 +/- 148.9
  Background counts = 2353.5
  Rate = 1 +/- 0.009
[Fri Jul 13 04:03:46 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 04:03:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 04:03:46 2012] Assessing source extent using major
[Fri Jul 13 04:03:46 2012] Source does appear to be extended
[Fri Jul 13 04:03:46 2012] Computing asymmetry using major and minor axis, asym = 1.14
[Fri Jul 13 04:04:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 04:04:07 2012] Initial guess for spatial extent in simple fitting = 6.98"
[Fri Jul 13 04:04:07 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.903
[Fri Jul 13 04:04:07 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.98"
[Fri Jul 13 04:49:15 2012] fullrun_pn_xmm0111120101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 13 04:49:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111120101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 04:49:15 2012] fullrun_pn_xmm0111120101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 13 04:49:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111120101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 04:49:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111120101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111120101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 04:49:16 2012] fullrun_pn_xmm0111120101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 13 04:49:16 2012] fullrun_pn_xmm0111120101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 13 04:49:16 2012] Fit fullrun_pn_xmm0111120101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 13 05:56:24 2012] Spatial fit model total counts = 22935.100000, observed total counts = 21804.000000
[Fri Jul 13 05:56:24 2012] Offset between fit and detection position for source 1 = 0.334753 pixels
[Fri Jul 13 05:56:24 2012] 22779.560000 total counts/ 5670.360000 bgd. counts: snr = 227.208402
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.334753 pixels
  Position = (322.3, 341.4) = 19 1 40.76 -36 52 34.3
  Extent = 5.8 (5.7-5.8)", rotation angle = 0
  Source counts = 17109.2 +/- 150.9
  Background counts = 5670.4
  Rate = 1 +/- 0.009
[Fri Jul 13 05:56:24 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 05:56:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 05:56:24 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 05:56:24 2012] Source does appear to be extended
[Fri Jul 13 05:56:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 05:56:39 2012] Counts = 17109.200000, rescaling region sizes by 3.000000
[Fri Jul 13 05:56:39 2012] XMMSAS src. selection expression = ellipse(27990.932000, 29657.483000, 1037.935830, 1037.935830, 0.000000, X, Y)
[Fri Jul 13 05:56:39 2012] Writing source region out to fullrun_pn_xmm0111120101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 13 05:56:39 2012] Extracting stamp from image fullrun_pn_xmm0111120101_pi300-10000_cl_sm2.00.img.gz, (263, 282) - (382, 401)
[Fri Jul 13 05:56:40 2012] XMMSAS bgd. selection expression = annulus(27990.932000, 29657.483000, 5189.679149, 10379.358299, X, Y) && !ellipse(35507.190369, 35272.257446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28095.285797, 30667.618896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28402.146118, 28470.826416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18065.570360, 25924.131200, 478.864014, 478.864014, 0.000000, X, Y) && !ellipse(26257.100159, 23885.986420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35709.639934, 23916.389200, 477.178414, 477.178414, 0.000000, X, Y) && !ellipse(25630.032684, 22905.072571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27797.635773, 22511.886627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30866.621307, 21355.892181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29380.302200, 19635.315800, 750.362422, 621.140818, 112.209000, X, Y) && !ellipse(24398.427092, 30240.322400, 365.485611, 365.485611, 0.000000, X, Y) && !ellipse(24916.596800, 24198.118200, 339.844810, 339.844810, 0.000000, X, Y) && !ellipse(24344.748932, 23852.830414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29661.354828, 23500.638123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16890.646652, 22850.506409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33210.398865, 22539.753815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27777.149567, 20862.182846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30808.579712, 18570.623077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19389.516418, 37731.794281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28359.944427, 35270.069702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27090.086395, 30048.474030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27732.843800, 26240.026000, 1055.832030, 1055.832030, 0.000000, X, Y) && !ellipse(28870.326019, 25459.993988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27698.944780, 25114.460000, 662.631219, 662.631219, 0.000000, X, Y) && !ellipse(25911.217200, 20155.460000, 662.631219, 662.631219, 0.000000, X, Y) && !ellipse(28558.009613, 38334.106262, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 05:56:40 2012] Writing fullrun_pn_xmm0111120101_pi300-10000_pass1_cl_src1.gif
[Fri Jul 13 05:56:56 2012] Mean detx,y = (-2931.33, 5318.97) 
[Fri Jul 13 05:57:00 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 06:00:33 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 06:00:33 2012] Setting source spectrum file to fullrun_pn_xmm0111120101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 13 06:00:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111120101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 13 08:33:04 2012] Updating aperture counts using extracted products
[Fri Jul 13 08:33:04 2012] Error reading totcts from fullrun_pn_xmm0111120101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 13 08:33:04 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 08:33:04 2012] Using photon index=1.80, rate=1.06, arf fullrun_pn_xmm0111120101_pi300-10000_pass1_cl_src1.arf
[Fri Jul 13 08:33:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 08:33:04 2012] Updating source flux to 3.4e-12
[Fri Jul 13 08:37:33 2012] Reading fit data from xmm0111120101/analysis//spectral/fullrun_pn_xmm0111120101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jul 13 08:37:33 2012] Spectral fit parameter nH value = 5.54041e+21
[Fri Jul 13 08:37:33 2012] Spectral fit parameter PhoIndex value = 2.46075
[Fri Jul 13 08:37:33 2012] Failed to get F(0.3-8.0) from xmm0111120101/analysis//spectral/fullrun_pn_xmm0111120101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jul 13 08:37:33 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 08:37:33 2012] Using Nh = 5.5e+21, photon index=2.46, rate=1.06, arf fullrun_pn_xmm0111120101_pi300-10000_pass1_cl_src1.arf
[Fri Jul 13 08:37:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 08:37:33 2012] Updating source flux to 5e-12