[Sun Jun 23 03:03:01 2013] Detection parameters:
  Position = (214.3, 166.7) = 2 26 59.67 -5 18 19.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.5 +/- 8.7
  Background counts = 7.8
  Rate = 0.005 +/- 0.001

[Sun Jun 23 03:03:01 2013] Off-axis axis estimate = 11.33'
[Sun Jun 23 03:03:27 2013] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 03:03:27 2013] Initial guess for spatial extent in simple fitting = 12.10"
[Sun Jun 23 03:03:27 2013] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.138
[Sun Jun 23 03:03:27 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 12.10"
[Sun Jun 23 03:03:28 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src17.ximg exists
[Sun Jun 23 03:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src17.csv
[Sun Jun 23 03:03:28 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun Jun 23 03:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src17.csv
[Sun Jun 23 03:03:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:03:28 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun Jun 23 03:03:28 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Jun 23 03:03:28 2013] Fit fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sun Jun 23 03:03:38 2013] Spatial fit model total counts = 112.550000, observed total counts = 111.000000
[Sun Jun 23 03:03:38 2013] Offset between fit and detection position for source 17 = 0.779248 pixels
[Sun Jun 23 03:03:38 2013] 112.091500 total counts/ 76.840600 bgd. counts: snr = 4.021377
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.779248 pixels
  Position = (215.1, 166.9) = 2 26 59.45 -5 18 18.8
  Extent = 7.0 (4.8-11.1)", rotation angle = 0
  Source counts = 35.3 +/- 10.6
  Background counts = 76.8
  Rate = 0.004 +/- 0.001
[Sun Jun 23 03:03:38 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 03:03:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 03:03:38 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 03:03:38 2013] Source does appear to be extended
[Sun Jun 23 03:03:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 03:03:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 23 03:03:59 2013] Initial guess for spatial extent in simple fitting = 7.03"
[Sun Jun 23 03:03:59 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.893
[Sun Jun 23 03:03:59 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 7.03"
[Sun Jun 23 03:04:00 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src16.ximg exists
[Sun Jun 23 03:04:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src16.csv
[Sun Jun 23 03:04:00 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src16_1.ximg exists
[Sun Jun 23 03:04:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src16.csv
[Sun Jun 23 03:04:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:04:00 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sun Jun 23 03:04:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sun Jun 23 03:04:00 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sun Jun 23 03:04:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sun Jun 23 03:04:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:04:10 2013] Warning, spatial fit 16 centroid is now closest to src. 12
[Sun Jun 23 03:04:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 03:04:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 03:04:11 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 03:04:11 2013] Source does appear to be extended
[Sun Jun 23 03:04:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 03:04:31 2013] XMMSAS src. selection expression = ellipse(18661.479000, 14470.183000, 421.837812, 421.837812, 0.000000, X, Y)
[Sun Jun 23 03:04:31 2013] Not overwriting source region fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src17_src.reg
[Sun Jun 23 03:04:31 2013] Extracting stamp from image fullrun_pn_xmm0111110701_pi300-10000_cl_sm2.00.img.gz, (191, 143) - (239, 191)
[Sun Jun 23 03:04:31 2013] XMMSAS bgd. selection expression = annulus(18661.479000, 14470.183000, 703.063020, 1406.126040, X, Y) && !ellipse(20513.386809, 15153.706286, 592.464166, 465.717072, 28.178949, X, Y)
[Sun Jun 23 03:04:31 2013] Writing fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src17.gif
[Sun Jun 23 03:08:53 2013] Mean detx,y = (3829.43, -11158.96) 
[Sun Jun 23 03:08:58 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 03:09:30 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 03:09:31 2013] Setting source spectrum file to fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Jun 23 03:09:31 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Jun 23 03:12:56 2013] Not generating rmf since there are only 35 counts
[Sun Jun 23 03:12:56 2013] rmf not generated due to insufficient counts
[Sun Jun 23 03:14:15 2013] Updating aperture counts using extracted products
[Sun Jun 23 03:14:15 2013] Total counts from fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 53.00
[Sun Jun 23 03:14:15 2013] Total counts from fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src17_bgd.pi.gz = 145.00
[Sun Jun 23 03:14:15 2013] Got source and background scale factors 561600.000000, 4057978.000000
[Sun Jun 23 03:14:15 2013] User source parameters:
  Position = (215.1, 166.9) = 2 26 59.45 -5 18 18.8
  Extent = 7.0 (4.8-11.1)", rotation angle = 0
  Source aperture counts = 32.9 +/- 8.3
  Background aperture counts = 20.1
  Rate = 0.004 +/- 0.001

[Sun Jun 23 03:14:16 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 03:14:16 2013] Using photon index=1.80, rate=0.0042, arf fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src17.arf
[Sun Jun 23 03:14:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 03:14:16 2013] Updating source flux to 2.5e-14
[Sun Jun 23 03:14:29 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 23 03:14:30 2013] xmm0111110701/analysis//spectral/fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete