[Sun Jun 23 03:03:00 2013] Detection parameters:
  Position = (466.3, 253.1) = 2 25 46.29 -5 12 2.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.1 +/- 9.5
  Background counts = 7.9
  Rate = 0.006 +/- 0.001

[Sun Jun 23 03:03:01 2013] Off-axis axis estimate = 12.61'
[Sun Jun 23 03:03:27 2013] Using EEF radius (= 12.73 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 03:03:27 2013] Initial guess for spatial extent in simple fitting = 12.73"
[Sun Jun 23 03:03:27 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.894
[Sun Jun 23 03:03:27 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 12.73"
[Sun Jun 23 03:03:28 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src13.ximg exists
[Sun Jun 23 03:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src13.csv
[Sun Jun 23 03:03:28 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Jun 23 03:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src13.csv
[Sun Jun 23 03:03:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:03:28 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Jun 23 03:03:28 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Jun 23 03:03:28 2013] Fit fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Jun 23 03:03:38 2013] Spatial fit model total counts = 152.866000, observed total counts = 153.000000
[Sun Jun 23 03:03:38 2013] Offset between fit and detection position for source 13 = 0.093668 pixels
[Sun Jun 23 03:03:38 2013] 152.168100 total counts/ 120.256000 bgd. counts: snr = 2.910060
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.093668 pixels
  Position = (466.3, 253.1) = 2 25 46.29 -5 12 3.5
  Extent = 6.1 (3.2-10.1)", rotation angle = 0
  Source counts = 31.9 +/- 12.3
  Background counts = 120.3
  Rate = 0.004 +/- 0.001
[Sun Jun 23 03:03:38 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 03:03:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 03:03:38 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 03:03:38 2013] Source does appear to be extended
[Sun Jun 23 03:03:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 03:03:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 23 03:03:59 2013] Initial guess for spatial extent in simple fitting = 6.07"
[Sun Jun 23 03:03:59 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.113
[Sun Jun 23 03:03:59 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 6.07"
[Sun Jun 23 03:04:00 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src13.ximg exists
[Sun Jun 23 03:04:00 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src13.csv
[Sun Jun 23 03:04:00 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Jun 23 03:04:00 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src13.csv
[Sun Jun 23 03:04:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:04:00 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Jun 23 03:04:00 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Jun 23 03:04:00 2013] Fit fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sun Jun 23 03:04:10 2013] Spatial fit model total counts = 132.872000, observed total counts = 133.000000
[Sun Jun 23 03:04:10 2013] Offset between fit and detection position for source 13 = 0.064833 pixels
[Sun Jun 23 03:04:10 2013] 132.075000 total counts/ 103.885000 bgd. counts: snr = 2.765787
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.064833 pixels
  Position = (466.3, 253.2) = 2 25 46.30 -5 12 3.2
  Extent = 5.4 (2.1-9.2)", rotation angle = 0
  Source counts = 28.2 +/- 11.5
  Background counts = 103.9
  Rate = 0.003 +/- 0.001
[Sun Jun 23 03:04:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 03:04:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 03:04:11 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 03:04:11 2013] Source does appear to be extended
[Sun Jun 23 03:04:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 03:04:31 2013] XMMSAS src. selection expression = ellipse(40516.703200, 21980.289400, 325.156209, 325.156209, 0.000000, X, Y)
[Sun Jun 23 03:04:31 2013] Not overwriting source region fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src13_src.reg
[Sun Jun 23 03:04:31 2013] Extracting stamp from image fullrun_pn_xmm0111110701_pi300-10000_cl_sm2.00.img.gz, (448, 235) - (485, 272)
[Sun Jun 23 03:04:31 2013] XMMSAS bgd. selection expression = annulus(40516.703200, 21980.289400, 541.927016, 1083.854031, X, Y)
[Sun Jun 23 03:04:31 2013] Writing fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src13.gif
[Sun Jun 23 03:06:42 2013] Mean detx,y = (-16157.74, 455.85) 
[Sun Jun 23 03:06:45 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 03:07:03 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 03:07:03 2013] Setting source spectrum file to fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Jun 23 03:07:03 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Jun 23 03:12:03 2013] Not generating rmf since there are only 28 counts
[Sun Jun 23 03:12:03 2013] rmf not generated due to insufficient counts
[Sun Jun 23 03:14:14 2013] Updating aperture counts using extracted products
[Sun Jun 23 03:14:14 2013] Total counts from fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 47.00
[Sun Jun 23 03:14:14 2013] Total counts from fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src13_bgd.pi.gz = 131.00
[Sun Jun 23 03:14:14 2013] Got source and background scale factors 331200.000000, 2777600.000000
[Sun Jun 23 03:14:14 2013] User source parameters:
  Position = (466.3, 253.2) = 2 25 46.30 -5 12 3.2
  Extent = 5.4 (2.1-9.2)", rotation angle = 0
  Source aperture counts = 31.4 +/- 7.9
  Background aperture counts = 15.6
  Rate = 0.004 +/- 0.0009

[Sun Jun 23 03:14:16 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 03:14:16 2013] Using photon index=1.80, rate=0.00336, arf fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src13.arf
[Sun Jun 23 03:14:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 03:14:16 2013] Updating source flux to 3.6e-14
[Sun Jun 23 03:14:29 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 23 03:14:30 2013] xmm0111110701/analysis//spectral/fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete