[Sun Jun 23 03:03:00 2013] Detection parameters:
  Position = (260.1, 285.0) = 2 26 46.33 -5 9 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.5 +/- 9.8
  Background counts = 9.1
  Rate = 0.007 +/- 0.001

[Sun Jun 23 03:03:01 2013] Off-axis axis estimate = 2.94'
[Sun Jun 23 03:03:27 2013] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 03:03:27 2013] Initial guess for spatial extent in simple fitting = 7.90"
[Sun Jun 23 03:03:27 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.746
[Sun Jun 23 03:03:27 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 7.90"
[Sun Jun 23 03:03:28 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src12.ximg exists
[Sun Jun 23 03:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src12.csv
[Sun Jun 23 03:03:28 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Jun 23 03:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src12.csv
[Sun Jun 23 03:03:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:03:28 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Jun 23 03:03:28 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Jun 23 03:03:28 2013] Fit fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Jun 23 03:03:38 2013] Source 12 is offset by -7.155186 and 6.278020 pixels which is larger than
2 X fitted extent = 0.908124 x 0.908124, not incorporating fit results
[Sun Jun 23 03:03:38 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 03:03:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 03:03:38 2013] Assessing source extent using major
[Sun Jun 23 03:03:38 2013] Source does appear to be extended
[Sun Jun 23 03:03:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 03:03:59 2013] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 03:03:59 2013] Initial guess for spatial extent in simple fitting = 7.90"
[Sun Jun 23 03:03:59 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.746
[Sun Jun 23 03:03:59 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 7.90"
[Sun Jun 23 03:04:00 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src12.ximg exists
[Sun Jun 23 03:04:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src12.csv
[Sun Jun 23 03:04:00 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun Jun 23 03:04:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src12.csv
[Sun Jun 23 03:04:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:04:00 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun Jun 23 03:04:00 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Jun 23 03:04:00 2013] Fit fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sun Jun 23 03:04:10 2013] Source 12 is offset by -7.155186 and 6.278020 pixels which is larger than
2 X fitted extent = 0.908124 x 0.908124, not incorporating fit results
[Sun Jun 23 03:04:10 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 117.108091 pixels away
[Sun Jun 23 03:04:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 03:04:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 03:04:11 2013] Assessing source extent using major
[Sun Jun 23 03:04:11 2013] Source does appear to be extended
[Sun Jun 23 03:04:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 03:04:31 2013] XMMSAS src. selection expression = ellipse(22581.052795, 24747.633698, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 03:04:31 2013] Not overwriting source region fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src12_src.reg
[Sun Jun 23 03:04:31 2013] Extracting stamp from image fullrun_pn_xmm0111110701_pi300-10000_cl_sm2.00.img.gz, (223, 248) - (298, 323)
[Sun Jun 23 03:04:31 2013] XMMSAS bgd. selection expression = annulus(22581.052795, 24747.633698, 1087.500000, 2175.000000, X, Y)
[Sun Jun 23 03:04:31 2013] Writing fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src12.gif
[Sun Jun 23 03:05:47 2013] Mean detx,y = (1974.47, -312.36) 
[Sun Jun 23 03:05:52 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 03:06:33 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 03:06:34 2013] Setting source spectrum file to fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Jun 23 03:06:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun Jun 23 03:11:19 2013] Not generating rmf since there are only 54 counts
[Sun Jun 23 03:11:19 2013] rmf not generated due to insufficient counts
[Sun Jun 23 03:14:14 2013] Updating aperture counts using extracted products
[Sun Jun 23 03:14:14 2013] Total counts from fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 99.00
[Sun Jun 23 03:14:14 2013] Total counts from fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src12_bgd.pi.gz = 441.00
[Sun Jun 23 03:14:14 2013] Got source and background scale factors 1338672.000000, 9118615.000000
[Sun Jun 23 03:14:14 2013] User source parameters:
  Position = (260.1, 285.0) = 2 26 46.33 -5 9 44.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 34.3 +/- 11.0
  Background aperture counts = 64.7
  Rate = 0.004 +/- 0.001

[Sun Jun 23 03:14:14 2013] Updating counts from extracted products
[Sun Jun 23 03:14:14 2013] Set source signif. to 34.26/8.05 = 4.26
[Sun Jun 23 03:14:16 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 03:14:16 2013] Using photon index=1.80, rate=0.00408, arf fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src12.arf
[Sun Jun 23 03:14:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 03:14:16 2013] Updating source flux to 1e-14
[Sun Jun 23 03:14:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 03:14:30 2013] xmm0111110701/analysis//spectral/fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete