[Sun Jun 23 03:03:00 2013] Detection parameters:
  Position = (340.3, 298.9) = 2 26 22.99 -5 8 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.4 +/- 12.2
  Background counts = 8.5
  Rate = 0.02 +/- 0.002

[Sun Jun 23 03:03:01 2013] Off-axis axis estimate = 3.03'
[Sun Jun 23 03:03:27 2013] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 03:03:27 2013] Initial guess for spatial extent in simple fitting = 7.94"
[Sun Jun 23 03:03:27 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.924
[Sun Jun 23 03:03:27 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 7.94"
[Sun Jun 23 03:03:28 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jun 23 03:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src11.csv
[Sun Jun 23 03:03:28 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jun 23 03:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src11.csv
[Sun Jun 23 03:03:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:03:28 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jun 23 03:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jun 23 03:03:28 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jun 23 03:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jun 23 03:03:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:03:38 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 10.977305 pixels away
[Sun Jun 23 03:03:38 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 03:03:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 03:03:38 2013] Assessing source extent using major
[Sun Jun 23 03:03:38 2013] Source does appear to be extended
[Sun Jun 23 03:03:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 03:03:59 2013] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 03:03:59 2013] Initial guess for spatial extent in simple fitting = 7.94"
[Sun Jun 23 03:03:59 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.924
[Sun Jun 23 03:03:59 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 7.94"
[Sun Jun 23 03:04:00 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src11.ximg exists
[Sun Jun 23 03:04:00 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Jun 23 03:04:00 2013] Fit fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_src11 appears to have run properly
[Sun Jun 23 03:04:00 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Jun 23 03:04:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun Jun 23 03:04:00 2013] fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Jun 23 03:04:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun Jun 23 03:04:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:04:10 2013] Source 11 is offset by 7.570693 and 6.189345 pixels which is larger than
2 X fitted extent = 7.305701 x 7.305701, not incorporating fit results
[Sun Jun 23 03:04:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 03:04:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 03:04:11 2013] Assessing source extent using major
[Sun Jun 23 03:04:11 2013] Source does appear to be extended
[Sun Jun 23 03:04:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 03:04:31 2013] XMMSAS src. selection expression = ellipse(29554.556274, 25954.379028, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 03:04:31 2013] Not overwriting source region fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src11_src.reg
[Sun Jun 23 03:04:31 2013] Extracting stamp from image fullrun_pn_xmm0111110701_pi300-10000_cl_sm2.00.img.gz, (303, 261) - (378, 336)
[Sun Jun 23 03:04:31 2013] XMMSAS bgd. selection expression = annulus(29554.556274, 25954.379028, 1087.500000, 2175.000000, X, Y)
[Sun Jun 23 03:04:31 2013] Writing fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src11.gif
[Sun Jun 23 03:05:19 2013] Mean detx,y = (-4607.91, 2232.11) 
[Sun Jun 23 03:05:23 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 03:05:37 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 03:05:37 2013] Setting source spectrum file to fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jun 23 03:05:37 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Jun 23 03:11:11 2013] Not generating rmf since there are only 88 counts
[Sun Jun 23 03:11:11 2013] rmf not generated due to insufficient counts
[Sun Jun 23 03:14:13 2013] Updating aperture counts using extracted products
[Sun Jun 23 03:14:13 2013] Total counts from fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 140.00
[Sun Jun 23 03:14:14 2013] Total counts from fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src11_bgd.pi.gz = 484.00
[Sun Jun 23 03:14:14 2013] Got source and background scale factors 1336000.000000, 10492768.000000
[Sun Jun 23 03:14:14 2013] User source parameters:
  Position = (340.3, 298.9) = 2 26 22.99 -5 8 45.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 78.4 +/- 12.9
  Background aperture counts = 61.6
  Rate = 0.009 +/- 0.002

[Sun Jun 23 03:14:14 2013] Updating counts from extracted products
[Sun Jun 23 03:14:14 2013] Set source signif. to 78.37/7.85 = 9.98
[Sun Jun 23 03:14:16 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 03:14:16 2013] Using photon index=1.80, rate=0.00933, arf fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src11.arf
[Sun Jun 23 03:14:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 03:14:16 2013] Updating source flux to 3.3e-14
[Sun Jun 23 03:14:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 03:14:30 2013] xmm0111110701/analysis//spectral/fullrun_pn_xmm0111110701_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete