[Sun Jun 23 03:03:04 2013] Detection parameters:
  Position = (239.1, 332.1) = 2 26 52.45 -5 6 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.6 +/- 12.8
  Background counts = 4.1
  Rate = 0.01 +/- 0.001

[Sun Jun 23 03:03:05 2013] Off-axis axis estimate = 4.95'
[Sun Jun 23 03:03:29 2013] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 03:03:29 2013] Initial guess for spatial extent in simple fitting = 8.90"
[Sun Jun 23 03:03:29 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.964
[Sun Jun 23 03:03:29 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.90"
[Sun Jun 23 03:03:30 2013] fullrun_mos2_xmm0111110701_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun 23 03:03:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110701_pi300-10000_cl_pass0_src3.csv
[Sun Jun 23 03:03:30 2013] fullrun_mos2_xmm0111110701_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun 23 03:03:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110701_pi300-10000_cl_pass0_src3.csv
[Sun Jun 23 03:03:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111110701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111110701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:03:30 2013] fullrun_mos2_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun 23 03:03:30 2013] fullrun_mos2_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun 23 03:03:30 2013] Fit fullrun_mos2_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Jun 23 03:03:47 2013] Spatial fit model total counts = 139.783000, observed total counts = 140.000000
[Sun Jun 23 03:03:47 2013] Offset between fit and detection position for source 4 = 0.187883 pixels
[Sun Jun 23 03:03:47 2013] 138.256400 total counts/ 68.094500 bgd. counts: snr = 8.502474
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.187883 pixels
  Position = (239.0, 332.2) = 2 26 52.49 -5 6 19.6
  Extent = 4.7 (3.9-5.9)", rotation angle = 0
  Source counts = 70.2 +/- 11.8
  Background counts = 68.1
  Rate = 0.006 +/- 0.0009
[Sun Jun 23 03:03:47 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 03:03:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 03:03:47 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 03:03:47 2013] Source does appear to be extended
[Sun Jun 23 03:03:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 03:04:01 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 23 03:04:01 2013] Initial guess for spatial extent in simple fitting = 4.74"
[Sun Jun 23 03:04:01 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.186
[Sun Jun 23 03:04:01 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 4.74"
[Sun Jun 23 03:04:02 2013] fullrun_mos2_xmm0111110701_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun 23 03:04:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110701_pi300-10000_cl_pass1_src3.csv
[Sun Jun 23 03:04:02 2013] fullrun_mos2_xmm0111110701_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun 23 03:04:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110701_pi300-10000_cl_pass1_src3.csv
[Sun Jun 23 03:04:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111110701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111110701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:04:03 2013] fullrun_mos2_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun 23 03:04:03 2013] fullrun_mos2_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun 23 03:04:03 2013] Fit fullrun_mos2_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jun 23 03:04:18 2013] Spatial fit model total counts = 139.653000, observed total counts = 140.000000
[Sun Jun 23 03:04:18 2013] Offset between fit and detection position for source 4 = 0.006756 pixels
[Sun Jun 23 03:04:18 2013] 138.136200 total counts/ 67.841600 bgd. counts: snr = 8.534418
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.006756 pixels
  Position = (239.0, 332.2) = 2 26 52.49 -5 6 19.6
  Extent = 4.8 (3.9-5.9)", rotation angle = 0
  Source counts = 70.3 +/- 11.8
  Background counts = 67.8
  Rate = 0.006 +/- 0.0009
[Sun Jun 23 03:04:18 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 03:04:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 03:04:18 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 03:04:18 2013] Source does appear to be extended
[Sun Jun 23 03:04:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 03:13:49 2013] XMMSAS src. selection expression = ellipse(20740.498380, 28855.474400, 287.149808, 287.149808, 0.000000, X, Y)
[Sun Jun 23 03:13:49 2013] Not overwriting source region fullrun_mos2_xmm0111110701_pi300-10000_pass1_cl_src4_src.reg
[Sun Jun 23 03:13:49 2013] Extracting stamp from image fullrun_mos2_xmm0111110701_pi300-10000_cl_sm2.00.img.gz, (222, 316) - (255, 349)
[Sun Jun 23 03:13:49 2013] XMMSAS bgd. selection expression = annulus(20740.498380, 28855.474400, 478.583014, 957.166028, X, Y)
[Sun Jun 23 03:13:49 2013] Writing fullrun_mos2_xmm0111110701_pi300-10000_pass1_cl_src4.gif
[Sun Jun 23 03:13:49 2013] ../../xmm0111110701/products/events/fullrun_mos2_xmm0111110701_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0111110701/products/events/fullrun_mos2_xmm0111110701_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Sun Jun 23 03:13:49 2013] Mean detx,y = (-4481.21, -3449.24) 
[Sun Jun 23 03:13:49 2013] ../../xmm0111110701/products/images/fullrun_mos2_xmm0111110701_pi300-10000_pass1_cl_src4_src.img and ../../xmm0111110701/products/images/fullrun_mos2_xmm0111110701_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Sun Jun 23 03:13:49 2013] ../../xmm0111110701/products/spectra/fullrun_mos2_xmm0111110701_pi300-10000_pass1_cl_src4_src.pi and ../../xmm0111110701/products/spectra/fullrun_mos2_xmm0111110701_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Sun Jun 23 03:13:49 2013] Setting source spectrum file to fullrun_mos2_xmm0111110701_pi300-10000_pass1_cl_src4_src.pi.gz
[Sun Jun 23 03:13:49 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111110701_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jun 23 03:13:49 2013] ../../xmm0111110701/products/lightcurves/fullrun_mos2_xmm0111110701_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0111110701/products/lightcurves/fullrun_mos2_xmm0111110701_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Sun Jun 23 03:13:54 2013] Not generating rmf since there are only 70 counts
[Sun Jun 23 03:13:54 2013] rmf not generated due to insufficient counts
[Sun Jun 23 03:14:21 2013] Updating aperture counts using extracted products
[Sun Jun 23 03:14:21 2013] Total counts from fullrun_mos2_xmm0111110701_pi300-10000_pass1_cl_src4_src.pi.gz = 76.00
[Sun Jun 23 03:14:21 2013] Total counts from fullrun_mos2_xmm0111110701_pi300-10000_pass1_cl_src4_bgd.pi.gz = 65.00
[Sun Jun 23 03:14:21 2013] Got source and background scale factors 264000.000000, 2151140.000000
[Sun Jun 23 03:14:21 2013] User source parameters:
  Position = (239.0, 332.2) = 2 26 52.49 -5 6 19.6
  Extent = 4.8 (3.9-5.9)", rotation angle = 0
  Source aperture counts = 68.0 +/- 9.8
  Background aperture counts = 8.0
  Rate = 0.005 +/- 0.0008

[Sun Jun 23 03:14:24 2013] No arf file for this source, not re-computing flux
[Sun Jun 23 03:14:28 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 23 03:14:29 2013] xmm0111110701/analysis//spectral/fullrun_mos2_xmm0111110701_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete