[Sun Jun 23 03:03:02 2013] Detection parameters:
  Position = (241.3, 457.1) = 2 26 51.80 -4 57 15.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28.0 +/- 6.5
  Background counts = 3.0
  Rate = 0.002 +/- 0.0005

[Sun Jun 23 03:03:03 2013] Off-axis axis estimate = 12.23'
[Sun Jun 23 03:03:28 2013] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 03:03:28 2013] Initial guess for spatial extent in simple fitting = 12.54"
[Sun Jun 23 03:03:28 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.917
[Sun Jun 23 03:03:28 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 12.54"
[Sun Jun 23 03:03:29 2013] fullrun_mos1_xmm0111110701_pi300-10000_cl_pass0_src14.ximg exists
[Sun Jun 23 03:03:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110701_pi300-10000_cl_pass0_src14.csv
[Sun Jun 23 03:03:29 2013] fullrun_mos1_xmm0111110701_pi300-10000_cl_pass0_src14_1.ximg exists
[Sun Jun 23 03:03:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110701_pi300-10000_cl_pass0_src14.csv
[Sun Jun 23 03:03:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110701_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110701_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:03:29 2013] fullrun_mos1_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sun Jun 23 03:03:29 2013] fullrun_mos1_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sun Jun 23 03:03:29 2013] Fit fullrun_mos1_xmm0111110701_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Sun Jun 23 03:03:42 2013] Spatial fit model total counts = 51.141900, observed total counts = 54.000000
[Sun Jun 23 03:03:42 2013] Offset between fit and detection position for source 7 = 0.224451 pixels
[Sun Jun 23 03:03:42 2013] 55.475500 total counts/ 35.072200 bgd. counts: snr = 3.445235
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.224451 pixels
  Position = (241.5, 457.1) = 2 26 51.74 -4 57 16.3
  Extent = 5.2 (3.1-8.4)", rotation angle = 0
  Source counts = 20.4 +/- 7.4
  Background counts = 35.1
  Rate = 0.002 +/- 0.0006
[Sun Jun 23 03:03:42 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 03:03:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 03:03:42 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 03:03:42 2013] Source does appear to be extended
[Sun Jun 23 03:03:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 03:04:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 23 03:04:00 2013] Initial guess for spatial extent in simple fitting = 5.21"
[Sun Jun 23 03:04:00 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.040
[Sun Jun 23 03:04:00 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 5.21"
[Sun Jun 23 03:04:01 2013] fullrun_mos1_xmm0111110701_pi300-10000_cl_pass1_src14.ximg exists
[Sun Jun 23 03:04:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110701_pi300-10000_cl_pass1_src14.csv
[Sun Jun 23 03:04:01 2013] fullrun_mos1_xmm0111110701_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Jun 23 03:04:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110701_pi300-10000_cl_pass1_src14.csv
[Sun Jun 23 03:04:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110701_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110701_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:04:01 2013] fullrun_mos1_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Jun 23 03:04:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jun 23 03:04:01 2013] fullrun_mos1_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Jun 23 03:04:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jun 23 03:04:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110701_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:04:13 2013] Warning, spatial fit 14 centroid is now closest to src. 8
[Sun Jun 23 03:04:13 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 03:04:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 03:04:13 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 03:04:13 2013] Source does appear to be extended
[Sun Jun 23 03:04:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 03:13:42 2013] XMMSAS src. selection expression = ellipse(20963.961800, 39721.821400, 312.771009, 312.771009, 0.000000, X, Y)
[Sun Jun 23 03:13:42 2013] Not overwriting source region fullrun_mos1_xmm0111110701_pi300-10000_pass1_cl_src7_src.reg
[Sun Jun 23 03:13:42 2013] Extracting stamp from image fullrun_mos1_xmm0111110701_pi300-10000_cl_sm2.00.img.gz, (224, 439) - (259, 475)
[Sun Jun 23 03:13:42 2013] XMMSAS bgd. selection expression = annulus(20963.961800, 39721.821400, 521.285015, 1042.570030, X, Y)
[Sun Jun 23 03:13:42 2013] Writing fullrun_mos1_xmm0111110701_pi300-10000_pass1_cl_src7.gif
[Sun Jun 23 03:13:42 2013] ../../xmm0111110701/products/events/fullrun_mos1_xmm0111110701_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0111110701/products/events/fullrun_mos1_xmm0111110701_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create
[Sun Jun 23 03:13:42 2013] Mean detx,y = (-13958.69, 6205.92) 
[Sun Jun 23 03:13:42 2013] ../../xmm0111110701/products/images/fullrun_mos1_xmm0111110701_pi300-10000_pass1_cl_src7_src.img and ../../xmm0111110701/products/images/fullrun_mos1_xmm0111110701_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create
[Sun Jun 23 03:13:42 2013] ../../xmm0111110701/products/spectra/fullrun_mos1_xmm0111110701_pi300-10000_pass1_cl_src7_src.pi and ../../xmm0111110701/products/spectra/fullrun_mos1_xmm0111110701_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create
[Sun Jun 23 03:13:42 2013] Setting source spectrum file to fullrun_mos1_xmm0111110701_pi300-10000_pass1_cl_src7_src.pi.gz
[Sun Jun 23 03:13:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111110701_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Jun 23 03:13:42 2013] ../../xmm0111110701/products/lightcurves/fullrun_mos1_xmm0111110701_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0111110701/products/lightcurves/fullrun_mos1_xmm0111110701_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create
[Sun Jun 23 03:13:48 2013] Not generating rmf since there are only 20 counts
[Sun Jun 23 03:13:48 2013] rmf not generated due to insufficient counts
[Sun Jun 23 03:14:20 2013] Updating aperture counts using extracted products
[Sun Jun 23 03:14:20 2013] Total counts from fullrun_mos1_xmm0111110701_pi300-10000_pass1_cl_src7_src.pi.gz = 26.00
[Sun Jun 23 03:14:20 2013] Total counts from fullrun_mos1_xmm0111110701_pi300-10000_pass1_cl_src7_bgd.pi.gz = 32.00
[Sun Jun 23 03:14:20 2013] Got source and background scale factors 279141.000000, 1520730.000000
[Sun Jun 23 03:14:20 2013] User source parameters:
  Position = (241.5, 457.1) = 2 26 51.74 -4 57 16.3
  Extent = 5.2 (3.1-8.4)", rotation angle = 0
  Source aperture counts = 20.1 +/- 6.2
  Background aperture counts = 5.9
  Rate = 0.002 +/- 0.0005

[Sun Jun 23 03:14:20 2013] No arf file for this source, not re-computing flux
[Sun Jun 23 03:14:27 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 23 03:14:28 2013] xmm0111110701/analysis//spectral/fullrun_mos1_xmm0111110701_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete