[Mon May 27 01:06:03 2013] Detection parameters:
  Position = (245.5, 217.9) = 2 22 49.43 -5 14 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1720.8 +/- 49.2
  Background counts = 22.3
  Rate = 0.1 +/- 0.004

[Mon May 27 01:06:05 2013] Off-axis axis estimate = 6.98'
[Mon May 27 01:09:02 2013] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Mon May 27 01:09:02 2013] Initial guess for spatial extent in simple fitting = 9.92"
[Mon May 27 01:09:02 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.970
[Mon May 27 01:09:02 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.92"
[Mon May 27 02:33:05 2013] fullrun_pn_xmm0111110501_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 27 02:33:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110501_pi300-10000_cl_pass0_src1.csv
[Mon May 27 02:33:05 2013] fullrun_pn_xmm0111110501_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 27 02:33:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110501_pi300-10000_cl_pass0_src1.csv
[Mon May 27 02:33:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111110501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111110501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 02:33:06 2013] fullrun_pn_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 27 02:33:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May 27 02:33:06 2013] fullrun_pn_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 27 02:33:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May 27 02:33:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:31:28 2013] Warning, spatial fit 1 centroid is now closest to src. 29
[Mon May 27 04:31:28 2013] Spatial fit model total counts = 335.088000, observed total counts = 274.000000
[Mon May 27 04:31:28 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 04:31:28 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:31:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:31:28 2013] Assessing source extent using major
[Mon May 27 04:31:28 2013] Source does appear to be extended
[Mon May 27 04:31:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:32:01 2013] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:32:01 2013] Initial guess for spatial extent in simple fitting = 9.92"
[Mon May 27 04:32:01 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.970
[Mon May 27 04:32:01 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.92"
[Mon May 27 05:54:24 2013] fullrun_pn_xmm0111110501_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 27 05:54:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110501_pi300-10000_cl_pass1_src1.csv
[Mon May 27 05:54:24 2013] fullrun_pn_xmm0111110501_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 27 05:54:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110501_pi300-10000_cl_pass1_src1.csv
[Mon May 27 05:54:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111110501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111110501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 05:54:25 2013] fullrun_pn_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 27 05:54:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 27 05:54:25 2013] fullrun_pn_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 27 05:54:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 27 05:54:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 07:24:18 2013] Warning, spatial fit 1 centroid is now closest to src. 29
[Mon May 27 07:24:18 2013] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.525022 pixels away
[Mon May 27 07:24:18 2013] Vigneting correction estimate = 1.000000
[Mon May 27 07:24:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 07:24:18 2013] Assessing source extent using major
[Mon May 27 07:24:18 2013] Source does appear to be extended
[Mon May 27 07:24:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 07:24:45 2013] Counts = 1720.798462, rescaling region sizes by 2.000000
[Mon May 27 07:24:45 2013] XMMSAS src. selection expression = ellipse(21309.101273, 18913.144424, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 27 07:24:45 2013] Writing source region out to fullrun_pn_xmm0111110501_pi300-10000_pass1_cl_src1_src.reg
[Mon May 27 07:24:45 2013] Extracting stamp from image fullrun_pn_xmm0111110501_pi300-10000_cl_sm2.00.img.gz, (170, 143) - (320, 293)
[Mon May 27 07:24:45 2013] XMMSAS bgd. selection expression = annulus(21309.101273, 18913.144424, 4350.000000, 8700.000000, X, Y) && !ellipse(12755.015860, 22205.298160, 513.560815, 375.556811, 71.670798, X, Y) && !ellipse(19487.978180, 14816.146149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24177.563000, 28334.157000, 988.920028, 563.329616, 47.196539, X, Y) && !ellipse(20695.476212, 28107.201569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27372.021301, 26839.629517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25321.455800, 26419.196800, 451.649613, 185.082405, 69.828580, X, Y) && !ellipse(27238.008698, 24643.795502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28146.865051, 23144.450012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30326.832611, 22130.961609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16270.203476, 21135.884506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19450.146667, 20118.503830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21539.679947, 19804.210754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30163.041199, 18566.167938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12472.604889, 18592.703629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25816.458221, 15072.842346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30154.305140, 14596.517800, 642.871218, 642.871218, 0.000000, X, Y) && !ellipse(17642.666200, 14156.329220, 509.280015, 509.280015, 0.000000, X, Y) && !ellipse(19246.805939, 11674.544235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12339.139221, 12726.958023, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 07:24:45 2013] Writing fullrun_pn_xmm0111110501_pi300-10000_pass1_cl_src1.gif
[Mon May 27 07:24:59 2013] Mean detx,y = (135.21, -6784.05) 
[Mon May 27 07:25:05 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 07:29:07 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 07:29:08 2013] Setting source spectrum file to fullrun_pn_xmm0111110501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 27 07:29:08 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111110501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 27 07:59:05 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 07:59:05 2013] rmf not generated due to insufficient counts
[Mon May 27 08:53:01 2013] Updating aperture counts using extracted products
[Mon May 27 08:53:01 2013] Total counts from fullrun_pn_xmm0111110501_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1935.00
[Mon May 27 08:53:02 2013] Total counts from fullrun_pn_xmm0111110501_pi300-10000_pass1_cl_src1_bgd.pi.gz = 11850.00
[Mon May 27 08:53:02 2013] Got source and background scale factors 4748487.000000, 141248761.000000
[Mon May 27 08:53:02 2013] User source parameters:
  Position = (245.5, 217.9) = 2 22 49.43 -5 14 52.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1536.6 +/- 45.0
  Background aperture counts = 398.4
  Rate = 0.08 +/- 0.002

[Mon May 27 08:53:02 2013] Updating counts from extracted products
[Mon May 27 08:53:02 2013] Set source signif. to 1536.63/19.96 = 76.99
[Mon May 27 08:53:19 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 08:53:19 2013] Using photon index=1.80, rate=0.0803, arf fullrun_pn_xmm0111110501_pi300-10000_pass1_cl_src1.arf
[Mon May 27 08:53:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 08:53:21 2013] Updating source flux to 2.8e-13
[Mon May 27 08:53:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 27 08:53:55 2013] xmm0111110501/analysis//spectral/fullrun_pn_xmm0111110501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete