[Mon May 27 01:07:11 2013] Detection parameters:
  Position = (349.9, 249.4) = 2 22 19.04 -5 12 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.8 +/- 7.6
  Background counts = 6.6
  Rate = 0.002 +/- 0.0005

[Mon May 27 01:07:11 2013] Off-axis axis estimate = 5.15'
[Mon May 27 03:32:45 2013] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Mon May 27 03:32:45 2013] Initial guess for spatial extent in simple fitting = 9.00"
[Mon May 27 03:32:45 2013] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.871
[Mon May 27 03:32:45 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 9.00"
[Mon May 27 04:31:16 2013] fullrun_mos2_xmm0111110501_pi300-10000_cl_pass0_src19.ximg exists
[Mon May 27 04:31:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110501_pi300-10000_cl_pass0_src19.csv
[Mon May 27 04:31:16 2013] fullrun_mos2_xmm0111110501_pi300-10000_cl_pass0_src19_1.ximg exists
[Mon May 27 04:31:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110501_pi300-10000_cl_pass0_src19.csv
[Mon May 27 04:31:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111110501_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111110501_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:31:16 2013] fullrun_mos2_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Mon May 27 04:31:16 2013] fullrun_mos2_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Mon May 27 04:31:16 2013] Fit fullrun_mos2_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Mon May 27 04:31:43 2013] Spatial fit model total counts = 94.814300, observed total counts = 86.000000
[Mon May 27 04:31:43 2013] Offset between fit and detection position for source 19 = 0.302487 pixels
[Mon May 27 04:31:43 2013] 97.813900 total counts/ 69.210300 bgd. counts: snr = 3.438233
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.302487 pixels
  Position = (350.0, 249.1) = 2 22 19.01 -5 12 37.4
  Extent = 6.3 (3.3-10.0)", rotation angle = 0
  Source counts = 28.6 +/- 9.9
  Background counts = 69.2
  Rate = 0.001 +/- 0.0004
[Mon May 27 04:31:43 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:31:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:31:43 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:31:43 2013] Source does appear to be extended
[Mon May 27 04:31:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 06:39:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 06:39:58 2013] Initial guess for spatial extent in simple fitting = 6.31"
[Mon May 27 06:39:58 2013] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.052
[Mon May 27 06:39:58 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 6.31"
[Mon May 27 07:24:08 2013] fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_src19.ximg exists
[Mon May 27 07:24:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_src19.csv
[Mon May 27 07:24:08 2013] fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_src19_1.ximg exists
[Mon May 27 07:24:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_src19.csv
[Mon May 27 07:24:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 07:24:08 2013] fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Mon May 27 07:24:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src19.csv
[Mon May 27 07:24:08 2013] fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Mon May 27 07:24:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src19.csv
[Mon May 27 07:24:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 07:24:29 2013] Warning, spatial fit 19 centroid is now closest to src. 22
[Mon May 27 07:24:29 2013] Vigneting correction estimate = 1.000000
[Mon May 27 07:24:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 07:24:29 2013] Assessing source extent using major axis lower bound
[Mon May 27 07:24:29 2013] Source does appear to be extended
[Mon May 27 07:24:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:35:35 2013] XMMSAS src. selection expression = ellipse(30398.369280, 21627.526400, 378.412811, 378.412811, 0.000000, X, Y)
[Mon May 27 08:35:35 2013] Writing source region out to fullrun_mos2_xmm0111110501_pi300-10000_pass1_cl_src19_src.reg
[Mon May 27 08:35:35 2013] Extracting stamp from image fullrun_mos2_xmm0111110501_pi300-10000_cl_sm2.00.img.gz, (328, 227) - (372, 271)
[Mon May 27 08:35:35 2013] XMMSAS bgd. selection expression = annulus(30398.369280, 21627.526400, 630.688018, 1261.376036, X, Y)
[Mon May 27 08:35:35 2013] Writing fullrun_mos2_xmm0111110501_pi300-10000_pass1_cl_src19.gif
[Mon May 27 08:42:50 2013] Mean detx,y = (7107.07, 312.80) 
[Mon May 27 08:42:52 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 08:43:02 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 08:43:02 2013] Setting source spectrum file to fullrun_mos2_xmm0111110501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon May 27 08:43:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111110501_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon May 27 08:51:52 2013] Not generating rmf since there are only 28 counts
[Mon May 27 08:51:52 2013] rmf not generated due to insufficient counts
[Mon May 27 08:53:41 2013] Updating aperture counts using extracted products
[Mon May 27 08:53:41 2013] Total counts from fullrun_mos2_xmm0111110501_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 45.00
[Mon May 27 08:53:41 2013] Total counts from fullrun_mos2_xmm0111110501_pi300-10000_pass1_cl_src19_bgd.pi.gz = 119.00
[Mon May 27 08:53:41 2013] Got source and background scale factors 426875.000000, 3308775.000000
[Mon May 27 08:53:41 2013] User source parameters:
  Position = (350.0, 249.1) = 2 22 19.01 -5 12 37.4
  Extent = 6.3 (3.3-10.0)", rotation angle = 0
  Source aperture counts = 29.6 +/- 7.8
  Background aperture counts = 15.4
  Rate = 0.001 +/- 0.0003

[Mon May 27 08:53:44 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 08:53:44 2013] Using photon index=1.80, rate=0.00118, arf fullrun_mos2_xmm0111110501_pi300-10000_pass1_cl_src19.arf
[Mon May 27 08:53:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 08:53:44 2013] Updating source flux to 2e-14
[Mon May 27 08:53:49 2013] Source 19 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 27 08:53:51 2013] xmm0111110501/analysis//spectral/fullrun_mos2_xmm0111110501_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete