[Mon May 27 01:07:10 2013] Detection parameters:
  Position = (246.8, 215.4) = 2 22 49.06 -5 14 55.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 206.5 +/- 17.1
  Background counts = 6.4
  Rate = 0.02 +/- 0.001

[Mon May 27 01:07:11 2013] Off-axis axis estimate = 7.09'
[Mon May 27 03:32:45 2013] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Mon May 27 03:32:45 2013] Initial guess for spatial extent in simple fitting = 9.97"
[Mon May 27 03:32:45 2013] source mask rpix=2.3, npix_max = 31, mask sum = 22, frac = 0.705
[Mon May 27 03:32:45 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.97"
[Mon May 27 04:31:15 2013] fullrun_mos2_xmm0111110501_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 27 04:31:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110501_pi300-10000_cl_pass0_src1.csv
[Mon May 27 04:31:15 2013] fullrun_mos2_xmm0111110501_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 27 04:31:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110501_pi300-10000_cl_pass0_src1.csv
[Mon May 27 04:31:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111110501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111110501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:31:16 2013] fullrun_mos2_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 27 04:31:16 2013] fullrun_mos2_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 27 04:31:16 2013] Fit fullrun_mos2_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 27 04:31:43 2013] Spatial fit model total counts = 306.480000, observed total counts = 284.000000
[Mon May 27 04:31:43 2013] Offset between fit and detection position for source 1 = 1.900072 pixels
[Mon May 27 04:31:43 2013] 255.529000 total counts/ 132.084000 bgd. counts: snr = 10.741091
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.900072 pixels
  Position = (247.6, 217.1) = 2 22 48.81 -5 14 56.7
  Extent = 4.2 (2.9-6.1)", rotation angle = 0
  Source counts = 123.4 +/- 16.0
  Background counts = 132.1
  Rate = 0.005 +/- 0.0007
[Mon May 27 04:31:43 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:31:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:31:43 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:31:43 2013] Source does appear to be extended
[Mon May 27 04:31:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:31:43 2013] Source is confused with source 20
[Mon May 27 06:39:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 06:39:58 2013] Initial guess for spatial extent in simple fitting = 4.19"
[Mon May 27 06:39:58 2013] source mask rpix=1.0, npix_max = 8, mask sum = 5, frac = 0.584
[Mon May 27 06:39:58 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 4.19"
[Mon May 27 07:24:08 2013] fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 27 07:24:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_src1.csv
[Mon May 27 07:24:08 2013] fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 27 07:24:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_src1.csv
[Mon May 27 07:24:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 07:24:08 2013] fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 27 07:24:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 27 07:24:08 2013] fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 27 07:24:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 27 07:24:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 07:24:29 2013] Spatial fit model total counts = 379.961000, observed total counts = 278.000000
[Mon May 27 07:24:29 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 07:24:29 2013] Vigneting correction estimate = 1.000000
[Mon May 27 07:24:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 07:24:29 2013] Assessing source extent using major axis lower bound
[Mon May 27 07:24:29 2013] Source does appear to be extended
[Mon May 27 07:24:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:35:35 2013] XMMSAS src. selection expression = ellipse(21494.777200, 18840.812800, 251.379607, 251.379607, 0.000000, X, Y)
[Mon May 27 08:35:35 2013] Writing source region out to fullrun_mos2_xmm0111110501_pi300-10000_pass1_cl_src1_src.reg
[Mon May 27 08:35:35 2013] Extracting stamp from image fullrun_mos2_xmm0111110501_pi300-10000_cl_sm2.00.img.gz, (233, 203) - (262, 232)
[Mon May 27 08:35:35 2013] XMMSAS bgd. selection expression = annulus(21494.777200, 18840.812800, 418.966012, 837.932024, X, Y) && !ellipse(21205.058640, 18697.257355, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 08:35:35 2013] Writing fullrun_mos2_xmm0111110501_pi300-10000_pass1_cl_src1.gif
[Mon May 27 08:35:39 2013] Mean detx,y = (220.26, 6685.78) 
[Mon May 27 08:35:42 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 08:36:02 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 08:36:03 2013] Setting source spectrum file to fullrun_mos2_xmm0111110501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 27 08:36:03 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111110501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 27 08:53:32 2013] Updating aperture counts using extracted products
[Mon May 27 08:53:32 2013] Total counts from fullrun_mos2_xmm0111110501_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 144.00
[Mon May 27 08:53:32 2013] Total counts from fullrun_mos2_xmm0111110501_pi300-10000_pass1_cl_src1_bgd.pi.gz = 15.00
[Mon May 27 08:53:32 2013] Got source and background scale factors 122696.000000, 372620.000000
[Mon May 27 08:53:32 2013] User source parameters:
  Position = (247.6, 217.1) = 2 22 48.81 -5 14 56.7
  Extent = 4.2 (2.9-6.1)", rotation angle = 0
  Source aperture counts = 139.1 +/- 13.0
  Background aperture counts = 4.9
  Rate = 0.006 +/- 0.0005

[Mon May 27 08:53:43 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 08:53:43 2013] Using photon index=1.80, rate=0.00508, arf fullrun_mos2_xmm0111110501_pi300-10000_pass1_cl_src1.arf
[Mon May 27 08:53:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 08:53:43 2013] Updating source flux to 5.6e-13
[Mon May 27 08:53:49 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Mon May 27 08:53:49 2013] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon May 27 08:53:51 2013] xmm0111110501/analysis//spectral/fullrun_mos2_xmm0111110501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete