[Mon May 27 01:06:36 2013] Detection parameters:
  Position = (233.6, 357.8) = 2 22 52.89 -5 4 43.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.2 +/- 7.9
  Background counts = 7.1
  Rate = 0.002 +/- 0.0004

[Mon May 27 01:06:37 2013] Off-axis axis estimate = 6.38'
[Mon May 27 02:33:06 2013] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Mon May 27 02:33:06 2013] Initial guess for spatial extent in simple fitting = 9.62"
[Mon May 27 02:33:06 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.021
[Mon May 27 02:33:06 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 9.62"
[Mon May 27 03:32:45 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_src20.ximg exists
[Mon May 27 03:32:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_src20.csv
[Mon May 27 03:32:45 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_src20_1.ximg exists
[Mon May 27 03:32:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_src20.csv
[Mon May 27 03:32:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 03:32:45 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Mon May 27 03:32:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon May 27 03:32:45 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Mon May 27 03:32:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon May 27 03:32:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:31:35 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.743563 pixels away
[Mon May 27 04:31:35 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:31:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:31:35 2013] Assessing source extent using major
[Mon May 27 04:31:35 2013] Source does appear to be extended
[Mon May 27 04:31:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:31:35 2013] Source is confused with source 8
[Mon May 27 05:54:26 2013] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Mon May 27 05:54:26 2013] Initial guess for spatial extent in simple fitting = 9.62"
[Mon May 27 05:54:26 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.021
[Mon May 27 05:54:26 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 9.62"
[Mon May 27 06:39:58 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_src20.ximg exists
[Mon May 27 06:39:58 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon May 27 06:39:58 2013] Fit fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_src20 appears to have run properly
[Mon May 27 06:39:58 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon May 27 06:39:58 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon May 27 06:39:58 2013] Fit fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Mon May 27 07:24:23 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.743563 pixels away
[Mon May 27 07:24:23 2013] Vigneting correction estimate = 1.000000
[Mon May 27 07:24:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 07:24:23 2013] Assessing source extent using major
[Mon May 27 07:24:23 2013] Source does appear to be extended
[Mon May 27 07:24:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:14:37 2013] XMMSAS src. selection expression = ellipse(20272.222061, 31082.738037, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 08:14:37 2013] Writing source region out to fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src7_src.reg
[Mon May 27 08:14:37 2013] Extracting stamp from image fullrun_mos1_xmm0111110501_pi300-10000_cl_sm2.00.img.gz, (196, 320) - (271, 395)
[Mon May 27 08:14:37 2013] XMMSAS bgd. selection expression = annulus(20272.222061, 31082.738037, 1087.500000, 2175.000000, X, Y) && !ellipse(20832.087076, 30945.447800, 205.671206, 185.150405, 192.034000, X, Y)
[Mon May 27 08:14:37 2013] Writing fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src7.gif
[Mon May 27 08:21:44 2013] Mean detx,y = (-3699.98, 5699.43) 
[Mon May 27 08:21:46 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 08:22:04 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 08:22:05 2013] Setting source spectrum file to fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon May 27 08:22:05 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon May 27 08:34:40 2013] Not generating rmf since there are only 32 counts
[Mon May 27 08:34:40 2013] rmf not generated due to insufficient counts
[Mon May 27 08:53:28 2013] Updating aperture counts using extracted products
[Mon May 27 08:53:28 2013] Total counts from fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 95.00
[Mon May 27 08:53:28 2013] Total counts from fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src7_bgd.pi.gz = 372.00
[Mon May 27 08:53:28 2013] Got source and background scale factors 1229530.000000, 10279420.000000
[Mon May 27 08:53:28 2013] User source parameters:
  Position = (233.6, 357.8) = 2 22 52.89 -5 4 43.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 50.5 +/- 10.8
  Background aperture counts = 44.5
  Rate = 0.002 +/- 0.0004

[Mon May 27 08:53:28 2013] Updating counts from extracted products
[Mon May 27 08:53:28 2013] Set source signif. to 50.50/6.67 = 7.57
[Mon May 27 08:53:31 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 08:53:31 2013] Using photon index=1.80, rate=0.00208, arf fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src7.arf
[Mon May 27 08:53:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 08:53:32 2013] Updating source flux to 2.7e-14
[Mon May 27 08:53:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 27 08:53:49 2013] xmm0111110501/analysis//spectral/fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete