[Mon May 27 01:06:36 2013] Detection parameters:
  Position = (318.2, 251.5) = 2 22 28.27 -5 12 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.7 +/- 7.8
  Background counts = 6.5
  Rate = 0.002 +/- 0.0004

[Mon May 27 01:06:37 2013] Off-axis axis estimate = 3.69'
[Mon May 27 02:33:06 2013] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Mon May 27 02:33:06 2013] Initial guess for spatial extent in simple fitting = 8.27"
[Mon May 27 02:33:06 2013] source mask rpix=1.9, npix_max = 23, mask sum = 22, frac = 0.953
[Mon May 27 02:33:06 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 8.27"
[Mon May 27 03:32:45 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_src22.ximg exists
[Mon May 27 03:32:45 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_src22_1.ximg exists
[Mon May 27 03:32:45 2013] Fit fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_src22 appears to have run properly
[Mon May 27 03:32:45 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Mon May 27 03:32:45 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Mon May 27 03:32:45 2013] Fit fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Mon May 27 04:31:35 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 11.020509 pixels away
[Mon May 27 04:31:35 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:31:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:31:35 2013] Assessing source extent using major
[Mon May 27 04:31:35 2013] Source does appear to be extended
[Mon May 27 04:31:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 05:54:26 2013] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Mon May 27 05:54:26 2013] Initial guess for spatial extent in simple fitting = 8.27"
[Mon May 27 05:54:26 2013] source mask rpix=1.9, npix_max = 23, mask sum = 22, frac = 0.953
[Mon May 27 05:54:26 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 8.27"
[Mon May 27 06:39:58 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_src22.ximg exists
[Mon May 27 06:39:58 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_src22_1.ximg exists
[Mon May 27 06:39:58 2013] Fit fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_src22 appears to have run properly
[Mon May 27 06:39:58 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Mon May 27 06:39:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src22.csv
[Mon May 27 06:39:58 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Mon May 27 06:39:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src22.csv
[Mon May 27 06:39:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 07:24:23 2013] Source 18 is offset by 4.438960 and -6.781060 pixels which is larger than
2 X fitted extent = 0.951103 x 0.951103, not incorporating fit results
[Mon May 27 07:24:23 2013] Vigneting correction estimate = 1.000000
[Mon May 27 07:24:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 07:24:23 2013] Assessing source extent using major
[Mon May 27 07:24:23 2013] Source does appear to be extended
[Mon May 27 07:24:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 08:14:37 2013] XMMSAS src. selection expression = ellipse(27631.441559, 21830.835770, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 08:14:37 2013] Writing source region out to fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src18_src.reg
[Mon May 27 08:14:37 2013] Extracting stamp from image fullrun_mos1_xmm0111110501_pi300-10000_cl_sm2.00.img.gz, (281, 214) - (356, 289)
[Mon May 27 08:14:37 2013] XMMSAS bgd. selection expression = annulus(27631.441559, 21830.835770, 1087.500000, 2175.000000, X, Y) && !ellipse(27259.394958, 24581.407623, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 08:14:37 2013] Writing fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src18.gif
[Mon May 27 08:22:29 2013] Mean detx,y = (1529.15, -4650.94) 
[Mon May 27 08:22:31 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 08:22:43 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 08:22:44 2013] Setting source spectrum file to fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon May 27 08:22:44 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon May 27 08:34:58 2013] Not generating rmf since there are only 30 counts
[Mon May 27 08:34:58 2013] rmf not generated due to insufficient counts
[Mon May 27 08:53:29 2013] Updating aperture counts using extracted products
[Mon May 27 08:53:29 2013] Total counts from fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 71.00
[Mon May 27 08:53:29 2013] Total counts from fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src18_bgd.pi.gz = 343.00
[Mon May 27 08:53:29 2013] Got source and background scale factors 1254728.000000, 10438729.000000
[Mon May 27 08:53:29 2013] User source parameters:
  Position = (318.2, 251.5) = 2 22 28.27 -5 12 27.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 29.8 +/- 9.5
  Background aperture counts = 41.2
  Rate = 0.001 +/- 0.0004

[Mon May 27 08:53:29 2013] Updating counts from extracted products
[Mon May 27 08:53:29 2013] Set source signif. to 29.77/6.42 = 4.64
[Mon May 27 08:53:32 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 08:53:32 2013] Using photon index=1.80, rate=0.00123, arf fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src18.arf
[Mon May 27 08:53:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 08:53:32 2013] Updating source flux to 1.5e-14
[Mon May 27 08:53:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 27 08:53:49 2013] xmm0111110501/analysis//spectral/fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete