[Mon May 27 01:06:36 2013] Detection parameters:
  Position = (245.2, 217.5) = 2 22 49.52 -5 14 53.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 596.9 +/- 29.0
  Background counts = 6.9
  Rate = 0.04 +/- 0.002

[Mon May 27 01:06:37 2013] Off-axis axis estimate = 7.02'
[Mon May 27 02:33:06 2013] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Mon May 27 02:33:06 2013] Initial guess for spatial extent in simple fitting = 9.94"
[Mon May 27 02:33:06 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.967
[Mon May 27 02:33:06 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.94"
[Mon May 27 03:32:44 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 27 03:32:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_src1.csv
[Mon May 27 03:32:44 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 27 03:32:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_src1.csv
[Mon May 27 03:32:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 03:32:45 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 27 03:32:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May 27 03:32:45 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 27 03:32:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May 27 03:32:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:31:35 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.403270 pixels away
[Mon May 27 04:31:35 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:31:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:31:35 2013] Assessing source extent using major
[Mon May 27 04:31:35 2013] Source does appear to be extended
[Mon May 27 04:31:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 05:54:26 2013] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Mon May 27 05:54:26 2013] Initial guess for spatial extent in simple fitting = 9.94"
[Mon May 27 05:54:26 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.967
[Mon May 27 05:54:26 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.94"
[Mon May 27 06:39:58 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 27 06:39:58 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 27 06:39:58 2013] Fit fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_src1 appears to have run properly
[Mon May 27 06:39:58 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 27 06:39:58 2013] fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 27 06:39:58 2013] Fit fullrun_mos1_xmm0111110501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 27 07:24:23 2013] Spatial fit model total counts = 647.947000, observed total counts = 629.000000
[Mon May 27 07:24:23 2013] Offset between fit and detection position for source 1 = 0.242072 pixels
[Mon May 27 07:24:23 2013] 647.504000 total counts/ 164.818000 bgd. counts: snr = 37.597796
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.242072 pixels
  Position = (245.3, 217.7) = 2 22 49.48 -5 14 54.2
  Extent = 7.0 (6.4-7.8)" x 5.8 (5.1-6.6)", rotation angle = 37 (13-61) degrees
  Source counts = 482.7 +/- 25.4
  Background counts = 164.8
  Rate = 0.02 +/- 0.001
[Mon May 27 07:24:23 2013] Vigneting correction estimate = 1.000000
[Mon May 27 07:24:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 07:24:23 2013] Assessing source extent using major axis lower bound
[Mon May 27 07:24:23 2013] Source does appear to be extended
[Mon May 27 07:24:23 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.96
[Mon May 27 08:14:37 2013] XMMSAS src. selection expression = ellipse(21294.333400, 18891.701200, 420.927612, 348.708610, 36.592294, X, Y)
[Mon May 27 08:14:37 2013] Writing source region out to fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src1_src.reg
[Mon May 27 08:14:37 2013] Extracting stamp from image fullrun_mos1_xmm0111110501_pi300-10000_cl_sm2.00.img.gz, (221, 194) - (270, 242)
[Mon May 27 08:14:37 2013] XMMSAS bgd. selection expression = annulus(21294.333400, 18891.701200, 701.546020, 1403.092040, X, Y)
[Mon May 27 08:14:37 2013] Writing fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src1.gif
[Mon May 27 08:14:41 2013] Mean detx,y = (6919.70, -173.09) 
[Mon May 27 08:14:43 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 27 08:15:00 2013] Binned source spectrum to 10 counts/bin
[Mon May 27 08:15:01 2013] Setting source spectrum file to fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 27 08:15:01 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 27 08:53:23 2013] Updating aperture counts using extracted products
[Mon May 27 08:53:23 2013] Total counts from fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 502.00
[Mon May 27 08:53:23 2013] Total counts from fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src1_bgd.pi.gz = 200.00
[Mon May 27 08:53:23 2013] Got source and background scale factors 401260.000000, 4353174.000000
[Mon May 27 08:53:23 2013] User source parameters:
  Position = (245.3, 217.7) = 2 22 49.48 -5 14 54.2
  Extent = 7.0 (6.4-7.8)" x 5.8 (5.1-6.6)", rotation angle = 37 (13-61) degrees
  Source aperture counts = 483.6 +/- 23.4
  Background aperture counts = 18.4
  Rate = 0.02 +/- 0.001

[Mon May 27 08:53:31 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 08:53:31 2013] Using photon index=1.80, rate=0.0199, arf fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src1.arf
[Mon May 27 08:53:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 08:53:31 2013] Updating source flux to 3.1e-13
[Mon May 27 08:53:49 2013] xmm0111110501/analysis//spectral/fullrun_mos1_xmm0111110501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete