[Sat Jun 16 20:02:44 2012] Detection parameters:
  Position = (422.1, 257.1) = 2 23 18.09 -5 12 9.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 255.5 +/- 20.3
  Background counts = 18.5
  Rate = 0.01 +/- 0.0009

[Sat Jun 16 20:02:45 2012] Off-axis axis estimate = 9.45'
[Sat Jun 16 20:04:35 2012] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 20:04:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 16 20:04:35 2012] Initial guess for spatial extent in simple fitting = 11.15"
[Sat Jun 16 20:04:35 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.959
[Sat Jun 16 20:04:35 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.15"
[Sat Jun 16 20:57:08 2012] fullrun_pn_xmm0111110401_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 16 20:57:08 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111110401_pi300-10000_cl_pass0_src1.csv
[Sat Jun 16 20:57:08 2012] fullrun_pn_xmm0111110401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 16 20:57:08 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111110401_pi300-10000_cl_pass0_src1.csv
[Sat Jun 16 20:57:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111110401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111110401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 20:57:08 2012] fullrun_pn_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 16 20:57:08 2012] fullrun_pn_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 16 20:57:08 2012] Fit fullrun_pn_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 16 22:10:00 2012] Spatial fit model total counts = 478.964000, observed total counts = 460.000000
[Sat Jun 16 22:10:00 2012] Offset between fit and detection position for source 1 = 0.535942 pixels
[Sat Jun 16 22:10:00 2012] 476.098000 total counts/ 287.887000 bgd. counts: snr = 11.092616
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.535942 pixels
  Position = (421.5, 257.0) = 2 23 18.25 -5 12 9.7
  Extent = 7.0 (6.0-8.1)", rotation angle = 0
  Source counts = 188.2 +/- 21.8
  Background counts = 287.9
  Rate = 0.009 +/- 0.001
[Sat Jun 16 22:10:00 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 22:10:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 22:10:00 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 22:10:00 2012] Source does appear to be extended
[Sat Jun 16 22:10:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 22:10:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 22:10:21 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Sat Jun 16 22:10:21 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.120
[Sat Jun 16 22:10:21 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.02"
[Sat Jun 16 22:59:11 2012] fullrun_pn_xmm0111110401_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 16 22:59:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110401_pi300-10000_cl_pass1_src1.csv
[Sat Jun 16 22:59:11 2012] fullrun_pn_xmm0111110401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 16 22:59:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110401_pi300-10000_cl_pass1_src1.csv
[Sat Jun 16 22:59:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111110401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111110401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 22:59:12 2012] fullrun_pn_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 16 22:59:12 2012] fullrun_pn_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 16 22:59:12 2012] Fit fullrun_pn_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun 17 00:10:02 2012] Spatial fit model total counts = 359.405000, observed total counts = 353.000000
[Sun Jun 17 00:10:02 2012] Offset between fit and detection position for source 1 = 0.011858 pixels
[Sun Jun 17 00:10:02 2012] 357.871000 total counts/ 171.473000 bgd. counts: snr = 14.234538
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011858 pixels
  Position = (421.6, 257.1) = 2 23 18.25 -5 12 9.7
  Extent = 6.9 (5.9-8.1)", rotation angle = 0
  Source counts = 186.4 +/- 18.9
  Background counts = 171.5
  Rate = 0.009 +/- 0.0009
[Sun Jun 17 00:10:03 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 00:10:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 00:10:03 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 00:10:03 2012] Source does appear to be extended
[Sun Jun 17 00:10:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 00:10:23 2012] XMMSAS src. selection expression = ellipse(36627.101200, 22314.883400, 413.647812, 413.647812, 0.000000, X, Y)
[Sun Jun 17 00:10:23 2012] Writing source region out to fullrun_pn_xmm0111110401_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 17 00:10:23 2012] Extracting stamp from image fullrun_pn_xmm0111110401_pi300-10000_cl_sm2.00.img.gz, (398, 233) - (445, 281)
[Sun Jun 17 00:10:23 2012] XMMSAS bgd. selection expression = annulus(36627.101200, 22314.883400, 689.413020, 1378.826040, X, Y)
[Sun Jun 17 00:10:23 2012] Writing fullrun_pn_xmm0111110401_pi300-10000_pass1_cl_src1.gif
[Sun Jun 17 00:10:29 2012] Mean detx,y = (-12275.43, 2731.64) 
[Sun Jun 17 00:10:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 00:10:52 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 00:10:53 2012] Setting source spectrum file to fullrun_pn_xmm0111110401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 17 00:10:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111110401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 17 01:27:24 2012] Updating aperture counts using extracted products
[Sun Jun 17 01:27:24 2012] Error reading totcts from fullrun_pn_xmm0111110401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 17 01:27:25 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 01:27:25 2012] Using photon index=1.80, rate=0.00863, arf fullrun_pn_xmm0111110401_pi300-10000_pass1_cl_src1.arf
[Sun Jun 17 01:27:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 01:27:25 2012] Updating source flux to 5.7e-14
[Sun Jun 17 01:28:37 2012] Reading fit data from xmm0111110401/analysis//spectral/fullrun_pn_xmm0111110401_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jun 17 01:28:37 2012] Spectral fit parameter nH value = 3.35011e+12
[Sun Jun 17 01:28:37 2012] Spectral fit parameter PhoIndex value = 1.43288
[Sun Jun 17 01:28:37 2012] Failed to get F(0.3-8.0) from xmm0111110401/analysis//spectral/fullrun_pn_xmm0111110401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jun 17 01:28:37 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 01:28:37 2012] Using Nh = 3.4e+12, photon index=1.43, rate=0.00863, arf fullrun_pn_xmm0111110401_pi300-10000_pass1_cl_src1.arf
[Sun Jun 17 01:28:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 01:28:37 2012] Updating source flux to 7.5e-14