[Sat Jun 16 20:03:31 2012] Detection parameters:
  Position = (339.5, 110.4) = 2 23 42.14 -5 22 47.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.0 +/- 7.3
  Background counts = 4.8
  Rate = 0.001 +/- 0.0003

[Sat Jun 16 20:03:31 2012] Off-axis axis estimate = 13.95'
[Sat Jun 16 21:35:15 2012] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 21:35:15 2012] Initial guess for spatial extent in simple fitting = 13.40"
[Sat Jun 16 21:35:15 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.955
[Sat Jun 16 21:35:15 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 13.40"
[Sat Jun 16 22:09:52 2012] fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_src29.ximg exists
[Sat Jun 16 22:09:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_src29.csv
[Sat Jun 16 22:09:52 2012] fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_src29_1.ximg exists
[Sat Jun 16 22:09:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_src29.csv
[Sat Jun 16 22:09:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 22:09:52 2012] fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sat Jun 16 22:09:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src29.csv
[Sat Jun 16 22:09:52 2012] fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sat Jun 16 22:09:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src29.csv
[Sat Jun 16 22:09:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 22:10:10 2012] Spatial fit model total counts = 81.276800, observed total counts = 73.000000
[Sat Jun 16 22:10:10 2012] Offset between fit and detection position for source 30 = 0.077152 pixels
[Sat Jun 16 22:10:10 2012] 79.101500 total counts/ 57.317800 bgd. counts: snr = 2.877312
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.077152 pixels
  Position = (339.4, 110.4) = 2 23 42.16 -5 22 47.6
  Extent = 4.8 (3.4-6.4)", rotation angle = 0
  Source counts = 21.8 +/- 8.9
  Background counts = 57.3
  Rate = 0.0008 +/- 0.0003
[Sat Jun 16 22:10:10 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 22:10:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 22:10:10 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 22:10:10 2012] Source does appear to be extended
[Sat Jun 16 22:10:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 23:35:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 23:35:54 2012] Initial guess for spatial extent in simple fitting = 4.76"
[Sat Jun 16 23:35:54 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.886
[Sat Jun 16 23:35:54 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 4.76"
[Sun Jun 17 00:09:54 2012] fullrun_mos2_xmm0111110401_pi300-10000_cl_pass1_src29.ximg exists
[Sun Jun 17 00:09:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110401_pi300-10000_cl_pass1_src29.csv
[Sun Jun 17 00:09:54 2012] fullrun_mos2_xmm0111110401_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun Jun 17 00:09:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110401_pi300-10000_cl_pass1_src29.csv
[Sun Jun 17 00:09:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111110401_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111110401_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 00:09:54 2012] fullrun_mos2_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun Jun 17 00:09:54 2012] fullrun_mos2_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun Jun 17 00:09:54 2012] Fit fullrun_mos2_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sun Jun 17 00:10:13 2012] Spatial fit model total counts = 68.714000, observed total counts = 64.000000
[Sun Jun 17 00:10:13 2012] Offset between fit and detection position for source 30 = 0.038087 pixels
[Sun Jun 17 00:10:13 2012] 66.203400 total counts/ 44.252700 bgd. counts: snr = 3.299731
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.038087 pixels
  Position = (339.5, 110.4) = 2 23 42.15 -5 22 47.6
  Extent = 4.9 (3.2-6.8)", rotation angle = 0
  Source counts = 22.0 +/- 8.1
  Background counts = 44.3
  Rate = 0.0008 +/- 0.0003
[Sun Jun 17 00:10:13 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 00:10:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 00:10:13 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 00:10:13 2012] Source does appear to be extended
[Sun Jun 17 00:10:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 01:07:08 2012] XMMSAS src. selection expression = ellipse(29483.960600, 9556.443400, 296.800209, 296.800209, 0.000000, X, Y)
[Sun Jun 17 01:07:08 2012] Writing source region out to fullrun_mos2_xmm0111110401_pi300-10000_pass1_cl_src30_src.reg
[Sun Jun 17 01:07:08 2012] Extracting stamp from image fullrun_mos2_xmm0111110401_pi300-10000_cl_sm2.00.img.gz, (322, 93) - (357, 127)
[Sun Jun 17 01:07:08 2012] XMMSAS bgd. selection expression = annulus(29483.960600, 9556.443400, 494.667014, 989.334028, X, Y)
[Sun Jun 17 01:07:08 2012] Writing fullrun_mos2_xmm0111110401_pi300-10000_pass1_cl_src30.gif
[Sun Jun 17 01:13:26 2012] Mean detx,y = (11457.96, 11602.89) 
[Sun Jun 17 01:13:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 01:13:39 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 01:13:40 2012] Setting source spectrum file to fullrun_mos2_xmm0111110401_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun Jun 17 01:13:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111110401_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sun Jun 17 01:26:50 2012] Not generating rmf since there are only 21 counts
[Sun Jun 17 01:26:50 2012] rmf not generated due to insufficient counts
[Sun Jun 17 01:27:26 2012] Updating aperture counts using extracted products
[Sun Jun 17 01:27:26 2012] Error reading totcts from fullrun_mos2_xmm0111110401_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun Jun 17 01:27:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 01:27:27 2012] Using photon index=1.80, rate=0.000772, arf fullrun_mos2_xmm0111110401_pi300-10000_pass1_cl_src30.arf
[Sun Jun 17 01:27:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 01:27:27 2012] Updating source flux to 3.9e-14
[Sun Jun 17 01:27:40 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting