[Sat Jun 16 20:03:31 2012] Detection parameters:
  Position = (387.0, 404.3) = 2 23 28.30 -5 1 29.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.7 +/- 7.2
  Background counts = 6.0
  Rate = 0.001 +/- 0.0003

[Sat Jun 16 20:03:31 2012] Off-axis axis estimate = 10.01'
[Sat Jun 16 21:35:15 2012] Using EEF radius (= 11.43 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 21:35:15 2012] Initial guess for spatial extent in simple fitting = 11.43"
[Sat Jun 16 21:35:15 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.920
[Sat Jun 16 21:35:15 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 11.43"
[Sat Jun 16 22:09:52 2012] fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_src30.ximg exists
[Sat Jun 16 22:09:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_src30.csv
[Sat Jun 16 22:09:52 2012] fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_src30_1.ximg exists
[Sat Jun 16 22:09:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_src30.csv
[Sat Jun 16 22:09:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 22:09:52 2012] fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sat Jun 16 22:09:52 2012] fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sat Jun 16 22:09:52 2012] Fit fullrun_mos2_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Sat Jun 16 22:10:10 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 14.462059 pixels away
[Sat Jun 16 22:10:10 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 22:10:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 22:10:10 2012] Assessing source extent using major
[Sat Jun 16 22:10:10 2012] Source does appear to be extended
[Sat Jun 16 22:10:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 23:35:54 2012] Using EEF radius (= 11.43 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 23:35:54 2012] Initial guess for spatial extent in simple fitting = 11.43"
[Sat Jun 16 23:35:54 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.920
[Sat Jun 16 23:35:54 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 11.43"
[Sun Jun 17 00:09:54 2012] fullrun_mos2_xmm0111110401_pi300-10000_cl_pass1_src30.ximg exists
[Sun Jun 17 00:09:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110401_pi300-10000_cl_pass1_src30.csv
[Sun Jun 17 00:09:54 2012] fullrun_mos2_xmm0111110401_pi300-10000_cl_pass1_src30_1.ximg exists
[Sun Jun 17 00:09:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111110401_pi300-10000_cl_pass1_src30.csv
[Sun Jun 17 00:09:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111110401_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111110401_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 00:09:54 2012] fullrun_mos2_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sun Jun 17 00:09:54 2012] fullrun_mos2_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sun Jun 17 00:09:54 2012] Fit fullrun_mos2_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Sun Jun 17 00:10:13 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 14.445537 pixels away
[Sun Jun 17 00:10:13 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 00:10:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 00:10:13 2012] Assessing source extent using major
[Sun Jun 17 00:10:13 2012] Source does appear to be extended
[Sun Jun 17 00:10:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 01:07:08 2012] XMMSAS src. selection expression = ellipse(33624.198456, 35129.626617, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 17 01:07:08 2012] Writing source region out to fullrun_mos2_xmm0111110401_pi300-10000_pass1_cl_src19_src.reg
[Sun Jun 17 01:07:08 2012] Extracting stamp from image fullrun_mos2_xmm0111110401_pi300-10000_cl_sm2.00.img.gz, (350, 367) - (425, 442)
[Sun Jun 17 01:07:08 2012] XMMSAS bgd. selection expression = annulus(33624.198456, 35129.626617, 1087.500000, 2175.000000, X, Y)
[Sun Jun 17 01:07:08 2012] Writing fullrun_mos2_xmm0111110401_pi300-10000_pass1_cl_src19.gif
[Sun Jun 17 01:13:42 2012] Mean detx,y = (4171.38, -13281.74) 
[Sun Jun 17 01:13:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 01:13:50 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 01:13:50 2012] Setting source spectrum file to fullrun_mos2_xmm0111110401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Jun 17 01:13:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111110401_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun Jun 17 01:26:54 2012] Not generating rmf since there are only 27 counts
[Sun Jun 17 01:26:54 2012] rmf not generated due to insufficient counts
[Sun Jun 17 01:27:26 2012] Updating aperture counts using extracted products
[Sun Jun 17 01:27:26 2012] Error reading totcts from fullrun_mos2_xmm0111110401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Jun 17 01:27:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 01:27:27 2012] Using photon index=1.80, rate=0.000976, arf fullrun_mos2_xmm0111110401_pi300-10000_pass1_cl_src19.arf
[Sun Jun 17 01:27:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 01:27:27 2012] Updating source flux to 2.1e-14
[Sun Jun 17 01:27:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting