[Sat Jun 16 20:03:10 2012] Detection parameters:
  Position = (303.7, 115.0) = 2 23 52.58 -5 22 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.0 +/- 6.9
  Background counts = 5.4
  Rate = 0.001 +/- 0.0002

[Sat Jun 16 20:03:10 2012] Off-axis axis estimate = 13.31'
[Sat Jun 16 20:57:09 2012] Using EEF radius (= 13.08 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 20:57:09 2012] Initial guess for spatial extent in simple fitting = 13.08"
[Sat Jun 16 20:57:09 2012] source mask rpix=3.0, npix_max = 49, mask sum = 37, frac = 0.752
[Sat Jun 16 20:57:09 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 13.08"
[Sat Jun 16 21:35:15 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_src33.ximg exists
[Sat Jun 16 21:35:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_src33.csv
[Sat Jun 16 21:35:15 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_src33_1.ximg exists
[Sat Jun 16 21:35:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_src33.csv
[Sat Jun 16 21:35:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 21:35:15 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sat Jun 16 21:35:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sat Jun 16 21:35:15 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sat Jun 16 21:35:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sat Jun 16 21:35:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 22:10:06 2012] Spatial fit model total counts = 74.838900, observed total counts = 57.000000
[Sat Jun 16 22:10:06 2012] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 16 22:10:06 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 22:10:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 22:10:06 2012] Assessing source extent using major
[Sat Jun 16 22:10:06 2012] Source does appear to be extended
[Sat Jun 16 22:10:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 22:59:12 2012] Using EEF radius (= 13.08 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 22:59:12 2012] Initial guess for spatial extent in simple fitting = 13.08"
[Sat Jun 16 22:59:12 2012] source mask rpix=3.0, npix_max = 49, mask sum = 37, frac = 0.752
[Sat Jun 16 22:59:12 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 13.08"
[Sat Jun 16 23:35:54 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_src32.ximg exists
[Sat Jun 16 23:35:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_src32.csv
[Sat Jun 16 23:35:54 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_src32_1.ximg exists
[Sat Jun 16 23:35:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_src32.csv
[Sat Jun 16 23:35:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 23:35:54 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sat Jun 16 23:35:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sat Jun 16 23:35:54 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sat Jun 16 23:35:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sat Jun 16 23:35:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 00:10:08 2012] Spatial fit model total counts = 74.838900, observed total counts = 57.000000
[Sun Jun 17 00:10:08 2012] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 17 00:10:08 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 00:10:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 00:10:08 2012] Assessing source extent using major
[Sun Jun 17 00:10:08 2012] Source does appear to be extended
[Sun Jun 17 00:10:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 00:51:13 2012] XMMSAS src. selection expression = ellipse(26370.045105, 9954.563820, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 17 00:51:13 2012] Writing source region out to fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src21_src.reg
[Sun Jun 17 00:51:13 2012] Extracting stamp from image fullrun_mos1_xmm0111110401_pi300-10000_cl_sm2.00.img.gz, (266, 77) - (341, 152)
[Sun Jun 17 00:51:13 2012] XMMSAS bgd. selection expression = annulus(26370.045105, 9954.563820, 1087.500000, 2175.000000, X, Y)
[Sun Jun 17 00:51:13 2012] Writing fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src21.gif
[Sun Jun 17 00:57:42 2012] Mean detx,y = (12783.21, -8607.09) 
[Sun Jun 17 00:57:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 00:57:54 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 00:57:54 2012] Setting source spectrum file to fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Jun 17 00:57:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sun Jun 17 01:06:56 2012] Not generating rmf since there are only 28 counts
[Sun Jun 17 01:06:56 2012] rmf not generated due to insufficient counts
[Sun Jun 17 01:27:26 2012] Updating aperture counts using extracted products
[Sun Jun 17 01:27:26 2012] Error reading totcts from fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Jun 17 01:27:26 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 01:27:26 2012] Using photon index=1.80, rate=0.00102, arf fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src21.arf
[Sun Jun 17 01:27:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 01:27:26 2012] Updating source flux to 3e-14
[Sun Jun 17 01:27:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting