[Sat Jun 16 20:03:09 2012] Detection parameters:
  Position = (348.7, 322.0) = 2 23 39.48 -5 7 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 315.0 +/- 21.6
  Background counts = 6.6
  Rate = 0.02 +/- 0.001

[Sat Jun 16 20:03:10 2012] Off-axis axis estimate = 4.02'
[Sat Jun 16 20:57:09 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 20:57:09 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Sat Jun 16 20:57:09 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.840
[Sat Jun 16 20:57:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.44"
[Sat Jun 16 21:35:15 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 16 21:35:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_src1.csv
[Sat Jun 16 21:35:15 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 16 21:35:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_src1.csv
[Sat Jun 16 21:35:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 21:35:15 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 16 21:35:15 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 16 21:35:15 2012] Fit fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 16 22:10:05 2012] Spatial fit model total counts = 332.000000, observed total counts = 332.000000
[Sat Jun 16 22:10:05 2012] Offset between fit and detection position for source 2 = 0.170178 pixels
[Sat Jun 16 22:10:05 2012] 333.777000 total counts/ 103.584000 bgd. counts: snr = 22.617561
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.170178 pixels
  Position = (348.5, 322.0) = 2 23 39.53 -5 7 27.2
  Extent = 5.6 (5.0-6.3)", rotation angle = 0
  Source counts = 230.2 +/- 18.3
  Background counts = 103.6
  Rate = 0.008 +/- 0.0006
[Sat Jun 16 22:10:06 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 22:10:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 22:10:06 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 22:10:06 2012] Source does appear to be extended
[Sat Jun 16 22:10:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 22:59:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 22:59:12 2012] Initial guess for spatial extent in simple fitting = 5.56"
[Sat Jun 16 22:59:12 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.949
[Sat Jun 16 22:59:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.56"
[Sat Jun 16 23:35:54 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 16 23:35:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_src1.csv
[Sat Jun 16 23:35:54 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 16 23:35:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_src1.csv
[Sat Jun 16 23:35:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 23:35:54 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 16 23:35:54 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 16 23:35:54 2012] Fit fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun 17 00:10:08 2012] Spatial fit model total counts = 331.999000, observed total counts = 332.000000
[Sun Jun 17 00:10:08 2012] Offset between fit and detection position for source 2 = 0.001047 pixels
[Sun Jun 17 00:10:08 2012] 333.766000 total counts/ 103.076000 bgd. counts: snr = 22.722180
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.001047 pixels
  Position = (348.5, 322.0) = 2 23 39.53 -5 7 27.2
  Extent = 5.6 (5.0-6.4)", rotation angle = 0
  Source counts = 230.7 +/- 18.3
  Background counts = 103.1
  Rate = 0.008 +/- 0.0006
[Sun Jun 17 00:10:08 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 00:10:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 00:10:08 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 00:10:08 2012] Source does appear to be extended
[Sun Jun 17 00:10:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 00:51:12 2012] XMMSAS src. selection expression = ellipse(30269.773600, 27964.427000, 335.166610, 335.166610, 0.000000, X, Y)
[Sun Jun 17 00:51:12 2012] Writing source region out to fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src2_src.reg
[Sun Jun 17 00:51:12 2012] Extracting stamp from image fullrun_mos1_xmm0111110401_pi300-10000_cl_sm2.00.img.gz, (329, 303) - (368, 341)
[Sun Jun 17 00:51:12 2012] XMMSAS bgd. selection expression = annulus(30269.773600, 27964.427000, 558.611016, 1117.222032, X, Y) && !ellipse(31150.386800, 26577.732800, 697.240020, 697.240020, 0.000000, X, Y)
[Sun Jun 17 00:51:12 2012] Writing fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src2.gif
[Sun Jun 17 00:51:15 2012] Mean detx,y = (-5115.09, -4431.86) 
[Sun Jun 17 00:51:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 00:51:24 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 00:51:24 2012] Setting source spectrum file to fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 17 00:51:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun 17 01:27:25 2012] Updating aperture counts using extracted products
[Sun Jun 17 01:27:25 2012] Error reading totcts from fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 17 01:27:26 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 01:27:26 2012] Using photon index=1.80, rate=0.00812, arf fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src2.arf
[Sun Jun 17 01:27:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 01:27:26 2012] Updating source flux to 1.4e-13
[Sun Jun 17 01:27:40 2012] Reading fit data from xmm0111110401/analysis//spectral/fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src2_pl.csv
[Sun Jun 17 01:27:40 2012] Spectral fit parameter nH value = 7.71444e+20
[Sun Jun 17 01:27:40 2012] Spectral fit parameter PhoIndex value = 1.92348
[Sun Jun 17 01:27:40 2012] Failed to get F(0.3-8.0) from xmm0111110401/analysis//spectral/fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Jun 17 01:27:40 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 01:27:40 2012] Using Nh = 7.7e+20, photon index=1.92, rate=0.00812, arf fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src2.arf
[Sun Jun 17 01:27:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 01:27:40 2012] Updating source flux to 1.4e-13