[Sat Jun 16 20:03:10 2012] Detection parameters:
  Position = (265.7, 203.3) = 2 24 3.62 -5 16 2.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.1 +/- 12.0
  Background counts = 6.9
  Rate = 0.005 +/- 0.0006

[Sat Jun 16 20:03:10 2012] Off-axis axis estimate = 7.29'
[Sat Jun 16 20:57:09 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 20:57:09 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Sat Jun 16 20:57:09 2012] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.851
[Sat Jun 16 20:57:09 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.07"
[Sat Jun 16 21:35:15 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_src7.ximg exists
[Sat Jun 16 21:35:15 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Jun 16 21:35:15 2012] Fit fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_src7 appears to have run properly
[Sat Jun 16 21:35:15 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Jun 16 21:35:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Jun 16 21:35:15 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Jun 16 21:35:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Jun 16 21:35:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110401_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 22:10:05 2012] Spatial fit model total counts = 163.060000, observed total counts = 157.000000
[Sat Jun 16 22:10:05 2012] Offset between fit and detection position for source 16 = 0.316695 pixels
[Sat Jun 16 22:10:05 2012] 162.830900 total counts/ 83.854200 bgd. counts: snr = 8.624553
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.316695 pixels
  Position = (265.4, 203.3) = 2 24 3.71 -5 16 3.4
  Extent = 10.1 (6.0-14.9)" x 5.9 (4.2-8.6)", rotation angle = 339 (297-0) degrees
  Source counts = 79.0 +/- 12.8
  Background counts = 83.9
  Rate = 0.003 +/- 0.0004
[Sat Jun 16 22:10:06 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 22:10:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 22:10:06 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 22:10:06 2012] Source does appear to be extended
[Sat Jun 16 22:10:06 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.70
[Sat Jun 16 22:59:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 22:59:12 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Sat Jun 16 22:59:12 2012] source mask rpix=1.8, npix_max = 21, mask sum = 24, frac = 1.103
[Sat Jun 16 22:59:12 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.97"
[Sat Jun 16 23:35:54 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_src7.ximg exists
[Sat Jun 16 23:35:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_src7.csv
[Sat Jun 16 23:35:54 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Jun 16 23:35:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_src7.csv
[Sat Jun 16 23:35:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 23:35:54 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Jun 16 23:35:54 2012] fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Jun 16 23:35:54 2012] Fit fullrun_mos1_xmm0111110401_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Jun 17 00:10:08 2012] Spatial fit model total counts = 162.236000, observed total counts = 157.000000
[Sun Jun 17 00:10:08 2012] Offset between fit and detection position for source 16 = 0.019561 pixels
[Sun Jun 17 00:10:08 2012] 161.850600 total counts/ 90.996300 bgd. counts: snr = 7.427700
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.019561 pixels
  Position = (265.4, 203.3) = 2 24 3.71 -5 16 3.4
  Extent = 7.0 (5.3-9.4)", rotation angle = 0
  Source counts = 70.9 +/- 12.7
  Background counts = 91.0
  Rate = 0.002 +/- 0.0004
[Sun Jun 17 00:10:08 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 00:10:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 00:10:08 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 00:10:08 2012] Source does appear to be extended
[Sun Jun 17 00:10:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 00:51:12 2012] XMMSAS src. selection expression = ellipse(23045.135400, 17641.567600, 417.870612, 417.870612, 0.000000, X, Y)
[Sun Jun 17 00:51:12 2012] Writing source region out to fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src16_src.reg
[Sun Jun 17 00:51:12 2012] Extracting stamp from image fullrun_mos1_xmm0111110401_pi300-10000_cl_sm2.00.img.gz, (241, 179) - (289, 227)
[Sun Jun 17 00:51:12 2012] XMMSAS bgd. selection expression = annulus(23045.135400, 17641.567600, 696.451020, 1392.902040, X, Y)
[Sun Jun 17 00:51:12 2012] Writing fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src16.gif
[Sun Jun 17 00:52:20 2012] Mean detx,y = (7306.69, -2295.35) 
[Sun Jun 17 00:52:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 00:52:33 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 00:52:33 2012] Setting source spectrum file to fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Jun 17 00:52:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sun Jun 17 01:04:56 2012] Not generating rmf since there are only 70 counts
[Sun Jun 17 01:04:56 2012] rmf not generated due to insufficient counts
[Sun Jun 17 01:27:25 2012] Updating aperture counts using extracted products
[Sun Jun 17 01:27:25 2012] Error reading totcts from fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Jun 17 01:27:26 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 01:27:26 2012] Using photon index=1.80, rate=0.00249, arf fullrun_mos1_xmm0111110401_pi300-10000_pass1_cl_src16.arf
[Sun Jun 17 01:27:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 01:27:26 2012] Updating source flux to 3.9e-14
[Sun Jun 17 01:27:28 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting